DHUPGURI/APAS/BDO/NIT-010(2ND CALL)/2025-26

Supply & Erection of Single Steel pole of 6mt long approx wt- 41kg, made with IS CHS 80 mm OD 3.20mm th ISI with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.60 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Extra above, for providing CC (6:2:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. providing drilled hole in pole suitable for alkathene/polythene pipe entry as directed for street light wiring

S&F single arm header assembly 300mm long 80mm dia GI pipe welded with 1.5mt long 40mm dia GI pipe and MS angle iron frame of 35x35x5mm for photovoltic panel with nece. Nuts and bolts and painting including sypply and drawing necessy PVC insulated copper wire as per approved design&drawing of the EIC.

Supply and installation of SPV MODULE Indigenously manufactured PV module should be used. The PV module should have Mono crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ accredited Laboratory. The power output of the module(s) under STC should be a minimum of 75 Wp at a load voltage of 16.4 ± 0.2 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The module efficiency should not be less than 12 %. The terminal box on the module should have a provision for opening it for replacing the cable, if required. A distinctive serial number starting with NSM will be engraved on the frame of the module or screen printed on the tedlar sheet of the module. TATA BP or similar make.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By ISI-Medium GI pipe

Supply and Fixing Semi Integrated 12W Solar Streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for pathway marking and community lighting. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. Enclosed inside the unit Multi cell LFP Technology BATTERY Lithium Ion/Oxide 15Ah+1%, 12.8V+0.4V, Max Continuous Discharge current (w/o PCM) upto 42A, should conform to the latest BIS/ International standards which is charged by a highly effiecient mono-crystalline solar panel. The LED luminary delivers close to 100 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specificatoon. The light must have dust to drawn system to auto control the device. The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself. A manual ON/OFF switch has also been provided so that the light can be switched OFF when not in use for a long time.

Supply and fixing Information Sign baord 500 mm x 300 mm fabricated with M.S sheet 16 SWG and ISA fram25mm x25mm x4mm including painting and lettering with approved paint as per instruction of Authority.