Interior work for office of election commission of India, at 3rd floor, LIC Jeevan Tara building, Parliament Street, New Delhi

ABSTRACT OF COST

Amount (DSR) Amount (Non-DSR)

S No Description TOTAL AMOUNT

S No Description TOTAL AMOUNT

GRAND TOTAL 1,83,36,358.00

GRAND TOTAL 1,83,36,358.00

1 Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 DOOR,WINDOW & PARTITION

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed

9.1 in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall

1.01 be paid for separately).

9.1.1 Second class teak wood 0.5 Cum 131576.95 65788.48

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of

9.21 block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with

1.02 vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 15 Sqm 2015.75 30236.25

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of

1.04 MR approved make and model all complete as per the directions of Engineer-in-charge 5 Each 731.00 3655.00

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS screws for wooden doors of

1.05 MR approved make and model all complete as per the directions of Engineer-in-charge 10 Each 1996.00 19960.00

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with

1.06 9.83 ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary 3 Each 1025.65 3076.95

accessories and screws etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and

1.07 9.53 wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 12 Each 194.35 2332.20

graded stone aggregate 20mm nominal size).

Supply and installation of Aluminium Framed Glass Partitionfor Access and Cabin System for minimal frame,

room dividing solutions. Single glazed mullion free demountable glass partition using Toughened/ Laminated glass

in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing

(No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will

have Carpert Groove at the Bottom on both sides for accomodating max 8mm carpets. The Glass to be fixed with

1.08 MR help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim 105 Sqm 5776.00 606480.00

junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used

as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The

Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile

Bottom Seal pair for additional accoustic. Glass thickness - 10( LSG).shall be included in the product.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture,

including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and

1.09 21.18 making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge 45 Sqm 4540.70 204331.50

(Door handle, lock and stopper etc.to be paid separately).

Providing and fixing SS tubular handle bar 32 mm outer dia, 3.0 mm thick & 900 mm long with SS screws etc

1.10 .complete as per direction of Engineer-in-Charge.

MR Powder coated minimum thickness 50 micron aluminium tubular handle bar 38 Each 5550.00 210900.00

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce

Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil

(0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after

1.11 MR 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if 80 Sqm 2524.00 201920.00

exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she produces orginal warranty certificate

from the manufacturer.

2.0 FLOORING WORK

Providing and fixing removable raised/false access flooring with system and its components of approved make for

different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor

panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting of :

a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum

2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mmx100mmx3mm at the

bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud

16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and

stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base)

through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

b) S tringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick

having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring

maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the

floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall

2.01 MR provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring

etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure

Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed

bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6

mm and bottom 0.7 mm fused spot welded together (minimum64 welds in each dome and 20 welds along each

flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and

bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming

compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to

withstand a Concentrated Load of 363 kgs applied on area 25mm x25mm without collapse in the centre of the

panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure

the quality of the product.

Providing and Fixing of 5+1 mm thick Click-N-Lock tiles with wear layer is of 0.5 mm, Stone Polymer composite

and has an IXPE Cushion backing of 1 mm ,100% Water & Termite proof, Scratch / Fire / UV resistant, a

2.02 MR Recyclable Green product having WEL- LOCK click system with suitable skirting. Classification of abrasion 120 Sqm 2915.00 349800.00

resistance ( Rubbing action of two abrading wheels of S-42 Type , load Applied 500 grams, No. of Cycles

4,200).Design as approved

Supply of 100 mm by the Engineer/Architect"

"DMC" Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness

1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

3 FALSE CEILING WORK

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick

Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel

shall be factory cut in up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm

3.01 MR thick steel backed with enameled black paint having cut out to hold on panel in a module of 75mm closed. The 17.5 Sqm 3776.00 66080.00

joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia

galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I.shall

be matching with the panel.

Providing and fixing of mineral fibre Acoustic premium - Bubble Finish, 300 x 1200 mm x 15mm, NRC = 0.65,

Resistance to fire : REI 90 with OWAline ( Silhouette Black ) - 15 mm wide grooved grids finished in approved

3.02 MR shade.The main runners & coss Tees to have " Click " Installation sytem made of Corrosion - protected high tensile 500 Sqm 1325.00 662500.00

steel or approved equivalent.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

12.45 at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

3.03 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification

and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification

4.0 WALL FINISHES

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client /

Customer, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine

plywood / MDF / Mineral fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be

made industrially (using curtain coating process); opaque (if viewed against a support wall), uniformly coated with

PU lacquer (50 micron thick coating or more); panel to panel colour consistency (measured by photo

4.01 MR spectrometer); highly durable (passes hardness test for minimum 220 oscillations); humidity resistance (conforms 52 Sqm 4941.00 256932.00

to BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper,

no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer coating (compatible

neutral cure silicon)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with

9.127 high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,

4.02 including cost of adhesive of approved quality.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES

S NO DSR/ MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & Fixing Vinyl Coated Wall covering as per approved make and pattern as approved by the client &

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with

Acrylic Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/

4.04 MR Sqm] as per structural requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick 10 Sqm 12916.00 129160.00

water proof ply as per the design and dimensions approved. The proposal includes the cost of preparing

appropriate substrate surface over the civil structure provided, along with material cost & installation / fixing on

straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

Providing & supplying fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size

having head rail, rotator rail and bottom rail made of aluminum alloy 6063-T6 PER ASTM B221 - 85 extruded

profile, powder coated and provided in standard natural white color. The rolling tube should be made up of

aluminum alloy from extruded profile of 34 mm dia . The head rail dimensions should be of suitable size according

to the length of head rail and space available and finished with fabric cover matching with the louver fabric .The

cassette should conceal the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch

which raises), lower and tilts the blinds. White polycarbonate limit assemblies control vane over-rotation, located on

either side of individual blinds. The room darkening fabric of Blind should be of anti static polyester vanes which

4.05 MR have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white 100% knit 50 Sqm 9906.00 495300.00

polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100%

polyester fiber ( having Green guard certification ) treated with soil & dust repellent requiring minimum regular

interval cleaning.GREEN GUARD Gold certified for low-emitting products to maintain Indoor environment. Upto

80% ultraviolet protection with vanes open and 90% with vanes closed. The shading to be operated by Easy rise

mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved

shade as per direction of Engineer-in-charge..

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density

4.06 12.57 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and 185 Sqm 307.35 56859.75

held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

5.0 Miscellaneous Work

Company name "ELECTION COMMISSION OF INDIA" cut in SS brush 3d letter (SS304) of text ht. 600 and of

5.01 MR deph 1.5" font to be cut to sizes and directly installed on available base as per with approved SS fixtures,

including necessary hardware, substructure, extra, as specified and directed by Engineer in charge. The letters No. 25 4953.00 123825.00

shall be back lit.

5.02 MR Various Direction signages of exit and washroom identification with LED glow panel and proper fixture for

installation and connection 20"x9"

5.03 MR Providing making and fixing in position custom made SS siganges of sizes 16"x5"as per Architectural drawings

and instruction with approved SS fixtures, approved base including necessary hardware, substructure extra No. 12 619.00 7428.00

complete as per detail drawing, as specified and directed by Engineer in charge

GRAND TOTAL 4420130.125

GRAND TOTAL 4420130.125

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New

SUMMARY OF ELECTRICAL WORKS

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL 2,70,365 -

2 DISTRIBUTION BOARDS - 2,76,819

3 CABLES / MAINS 3,76,545 26,014

5 FIXTURES 5,96,200 -

6 WIRING FOR DATA AND VOICE OUTLETS 3,88,783 1,95,500

8 UPS & INVERTER SYSTEM 10,16,431 -

GRAND TOTAL 64,00,099

GRAND TOTAL 64,00,099

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

1.1 MAIN PANEL

Design, manufacture, supply, installation, testing and

commissioning of following LT switchgear panels suitable for 415

V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall

be, Indoor, free standing, floor mounting, sheet metal clad, cubicle,

dead front, dust and vermin proof type compartmentalized design

fabricated out of 14 SWG sheet steel, complete with aluminium bus

bars, separate earth bus bar to be provided through out the length

of the panel. The incoming and outgoing feeders shall be

accommodated in a modular multitier arrangement, adequate size

cable alley, painting, earthing, numbering, danger plate etc. as

required as per specifications and drawings.

One (1) No. 250A TPN MCCB 25KA

One (1) no. Dual Source KWH Meter with RS 485 port with 1 Set (3

No's) of suitable ratio, 15VA, CL 1.0 C.T,s & control fuses.

One (1) No. Digital Volt, Current & Frequency (VAF) Meter with in

built selector switch, 400A/5A CL-1.0,15VA resin cast CTs and

Electrolytic high conductivity Aluminium four pole busbars rated at

320 amps having a maximum current density of 1 amp per sq. mm

insulated with heat shrinkable PVC sleeves.

One (1) set of Class B+C/Class I+II (according to IEC 61643) Surge

Protection device Single MOV with built in thermal fuse type with

response time < 25 Nano seconds each with 3 numbers for the

connection between Phase and Neutral and Spark Gap

Encapsulated / Non-exhausting type with response time of < 100

Nano seconds 1 number between Neutral and Earth, Lightning

impulse current 7 KA(10/350 µsec ) phase to neutral and 25

KA(10/350 µsec) neutral to earth. OBO make

Four (4) Nos. 63A, 10 KA 4P MCBs "C" curve type

Twelve (12) Nos. 40A, 10 KA 4P MCBs "C" curve type

Two (2) Nos. 32A, 10 KA 4P MCB "C" curve type Set 1.0 270365.00 270365.00

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

The panel shall be IP52 ingress protection

All MCCBs above 200A rating shall be provided with

microprocessor based protection releases for short circuit, overload

with 0.4 - 1 x In adjustable overload protection release.

All MCCBs below and including 200A rating shall be provided with

thermal magnetic protection releases for short circuit, overload

protection with 0.8 - 1 x In adjustable overload protection release.

All MCCBs shall be (Ics=100% Icu)

All MCCBs shall be provided with spreader terminals, phase

barriers and rotary handle operating mechanism.

MCB compartments shall be provided with transparent sheet cover.

All outgoing feeders less than 100A shall be provide with terminal

block in cable alley.

Total of Main Panel over to summary 270365.00 0.00

2 DISTRIBUTION BOARDS

Supply ,Installation, Testing & commissioning of following double

door type distribution boards fabricated out of 16 SWG, CRCA

sheet steel recessed in wall or surface mounted.

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/

2.1 2.4 recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

2.2 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

2.3.1 6 way , Double door Each 1 2206.00 2206.00

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

b 2.10.3 Double pole Each 1 656.00 656.00

c 2.10.5 Triple pole and neutral Each 1 1228.00 1228.00

Supplying and fixing following rating, four pole, 415 V, isolator in the

2.4 2.13 existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 V, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Total of DB carried over to summary 0.00 276819.00

3 CABLES / MAINS

Laying of one number PVC insulated and PVC sheathed / XLPE

3.1 8.4 power cable of 11 KV grade of following size in the existing

masonry open duct as required.

b 8.4.2 Above 120 sq. mm and upto 400 sq. mm Meter 100 115.00 11500.00

Supply of 1100V grade armoured cable having sector / circular

shaped aluminium / copper conductor PVC insulated cores under

ground PVC tape wrapped inner sheathed, GI strip / wire armoured

and overall extruded PVC sheathed confirming to IS: 1554, laid on

wall or ceiling using GI clamps and spacers as per route shown at

site and further as directed by Engineer-in charge

a MR 240 Sq.mm 3 1/2 core Aluminium cable mtr. 50 1843.75 92187.31

b MR 70 Sq.mm 3 1/2 core Aluminium cable mtr. 50 628.71 31435.30

c MR 50 Sq.mm 3 1/2 core Aluminium cable mtr. 50 468.38 23419.01

d MR 25 Sq.mm 4 core copper cable mtr. 50 2390.44 119521.81

e MR 1 6Sq.mm 4 core copper cable mtr. 100 1099.81 109981.40

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

Total of Cables / Mains carried over to summary 376544.83 26014.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point

using 2 runs of 1100 V grade 1.5 sqmm & one run of 1.5 sq.mm

FRLS insulated multistranded copper wires, in & including 25 mm

4.1 1.3 dia , MS conduit surface/ concealed in wall / ceiling conferming to

IS 732 including all accessries such as junction boxes , conduit

bends, elbows and ceiling rose , and anodised GI switch box with

modular switch ,modular plate and the box covered with front plate

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed steel conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

4.2 1.7 following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

b 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per mtr. 200 369.00 73800.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per mtr. 0 428.00 0.00

d 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Per mtr. 200 924.00 184800.00

e 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Per mtr. 150 1166.00 174900.00

f 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Per mtr. 200 1645.00 329000.00

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

Exhaust fan point including of ceiling rose near fan. - Primary -

Wiring for twin control point wiring using 1.5 sqmm copper

conductor FRLS PVC insulated copper conductor cable drawn

through 25 dia MS conduit laid in surface/concealed over false

4.4 1.4 ceiling or in slab/wall chases including ,2way modular Per Pts 50 1981.00 99050.00

switches,modular plate ,suitable GI box and earthing the point with

1.5 sqm FRLS PVC insulated copper conductor single core cable

Supplying and fixing following modular switch/ socket on the

4.5 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 427 122.00 52094.00

d 1.24.5 6 pin 15/16 A socket outlet Each 58 197.00 11426.00

e 1.24.7 TV antenna socket outlet Each 15 148.00 2220.00

Supplying and fixing following size/ modules, GI box along with

4.6 1.27 modular base & cover plate for modular switches in recess etc. as

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/

recessed steel/ PVC conduit as required.

4.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 0 133.91 0.00

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

Supply and fixing of following sizes of MS conduit along with

accessories in surface /recess including painting in case of

surface conduit,or cutting the wall and making good the same in

case of recessed conduit as required

Total of Wiring carried over to summary 0.00 2272259.00

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt

with Lumen output of 3600 lumen. The product should be SMD

based and have non integral isolated driver with 2KV inbuilt surge

5.1 MR protection. THD<10%, PF >0.9,Product should have life class of Nos. 115 2534.22 291434.97

50K burning hour at L70 B50 parameter, Luminiare operating temp

0 D to 45D. Internal wiring should have teflon coted multi strand

wires and external wire should have PVC coated multistrand wires.

SITC of Recessed mouted PDC lowdepth(height should not be

more than 35mm) downlights with maximum 12 Watt with minimum

1320 lumen.The product should be SMD based & have non integral

isolated driver with 2KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50

parameter, Luminiare operating temp 0 D to 45D. Internal wiring

should have teflon coted multi strand wires and external wire should

have PVC coated multistrand wires.

Supply, Installation, Testing and Commisioning of Suspended

/surface/Recessed type linear Luminaire of size 72mm (N.S.),

Linear ultra modular fixture made up of extruded aluminium housing

with luminare efficasy more than 100 LPW, CRI >80, CCT of

5700K. suitable for 220 V, 50 Hz, The luminare rated life (L70)

5.3 MR >50000 Hours with High efficiency driver with inbuild surge RMT 44 3046.00 134024.00

protection, over voltage protection, short circuit protection and

operating at >0.95 .making suitable arrangement for fixing including

connection with 3 x 1.5 sq.mm. The price shall include all

accessories including jointing kit for uniform continuous lines of light

across ceiling etc complete in all respect

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete

5.4 MR with all hardware and connectors etc., as per the direction of the each 3 3990.00 11970.00

engineer In charge

Total of Light Fixture carried over to summary 596200.40

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI

marked conduits (IS : 9537 Part-III) complete with accessories such

6.1 as bends, junction boxes, pull boxes etc., in recess or on surface

including cutting chases in the walls/floors and making good the

same complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing

6.3 faceplate/ GI Box in wall/furniture/floor complete as required. Nos. 175 274.02 47953.79

Supplying and fixing following modular switch/ socket on the

6.4 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 50 148.00 7400.00

Supply and fixing of the following types Face Plates complete with

all accessories.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA)

square plate having spring shuttered front access for preventing

ingress of dust, dimension as per commercially available modular

office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (RJ45 for data )

and (RJ-11 for voice) or as required square plate having spring

shuttered front access for preventing ingress of dust, dimension as

per commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50

pair multi core 0.61 mm annealed copper conductor PVC insulated

and PVC sheathed armoured telephone cables generally

conforming to ITD S/WS-11-C and IS 1554 part I direct in ground

/surface and / or in existing pipe as required and includig making

terminal joints, complete as required.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

ELECTRICAL WORKS

S.No Description Unit Qty Rate MR Amount DSR Amount

Supplying, installing, testing and commissioning of 24 port Cat 6

patch panels available with block of four equipped with tool less IO,

6.7 MR Rack Mountable. 19" Modular Patch Panel, loaded CAT6 U/UTP 24 EACH 10 1700.77 17007.73

port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45

Tool less connector U/UTP unit in a block.

Supplying, installing, testing and commissioning of Cabinet. Size

24U (800 X 800 mm) (WXD) following accessories, Width (mm)

800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D' Grade

thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened

Tinted Glass Door,Injected one piece polyurethane gasket on

frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos,

Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A

6.8 MR sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable EACH 2 37378.35 74756.70

channel 100mm wide 24U- 2 Nos,Heavy Duty Stationary shelf M6

screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips

150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2

Nos, Castor Wheels (without Brake) - 2 Nos, Front Metal Band - 1

No. Packing: 5 ply cardboard & Inside 28 ply EP foam. In the rack

there must be maintained 1 U = 1.75 inches space. Nos. 1 etc

complete as required

Supply Installation testing and commissioning of 12 Port Loaded

6.10 MR Supply Installation testing and commissioning of Fiber patch cord each 1 1921.00 1921.00

Supply Installation testing and commissioning of multimode fiber

Supply Installation testing and commissioning of multimode 10G

Supply, installation, testing and commissioning of HDMI 4K/60

6.13 MR Receiver with Audio De-Embedding as per required specifications each 2 18413.00 36826.00

:Input CATx on RJ 45 port Video Output 1 HDMI

Supply, installation, testing and commissioning of HDMI 4K/60

6.14 MR Transmitter withAudio Embedding as per required specifications : each 2 18413.00 36826.00

Input 1 HDMI Video Output CATx on RJ 45 port

Supply, Installation, Tetsing & Commissoning of POP Box with

6.15 MR Manual Rotating system, 2 x Universal Power 2 x USB Charger, 2 x each 4 24038.00 96152.00

RJ45 Network, 1 x VGA, 1 x 3.5 mm Audio 1 x HDMI 2.0

Total of Data & Voice carried over to summary 388783.06 195500.00

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

S No DSR/ MR Description Unit Qty Rate MR Amount DSR Amount

20 kVA UPS with 15 minute backup

Supply, unloading, shifting, installation, testing & commissioning of micro processor controlled following rating UPS capable of operating in

parallel redundant mode so that if any one UPS fails the other can supply 100% load, IGBT based rectifier to achieve input THDI < 4% and

1.1 MR input power factor of greater than 0.99 at 100% loading with 3 level Inverter Topology. True Online Double Conversion (VFI as per IEC 62040- set 2 508215.62 1016431.24

3) UPS using PWM IGBT technology , 3 Phase input and 3 phase 415 V output UPS system; and comprising of the following complete as

required and as per specification:

Fully rated Rectifier cum charger unit and 100% rated Invertor unit Integrated in UPS module.

Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static bypass line integrated in UPS module.

Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments with below features.

Giving notifications like e-mail, paging notification, broadcast notification, battery replacement notification, run event-based scripts.

Event logging, data logging and action logging (with date, time, description of fault and event).

Fully rated Inbuilt Maintenance Bypass Switch for the continuous operation of the load during maintanance.

Local notification through audible alarm.

Fully rated Battery Circuit Breaker with under voltage coil & deep discharge protection to the batteries.

One time cost of replacement of PCBs to be considered, in case conformal coated PCBs are not available .

(Vendor to specify the cost considered)

Battery Banks comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries of minimum 5years design life to provide 15

minutes backup at 20kVA ,0.9PF, ECV=1.7V with each UPS. Minimum VAH required with each UPS 11232 VAH .The batteries shall be

installed on shelves of rack for quick replacement and servicing. The temperature sensor shall be provided in the battery section for

temperature compensated charging. The bank of batteries shall comprise of required numbers of batteries connected in series.

Vendor to provide complete details of make of Batteries, ampere hour ratings, no. of Batteries, Expected life, Final discharge voltage, Nominal

float voltage, Battery recharge time & configuration of back up time, Battery sizing Calculations

Supply, unloading, installation, testing & commissioning of open type MS racks including top fully cover to protect from falling object to house

SMF batteries for 30 kVA UPS system along with suitable interconnecting links, moulded case circuit breaker having Ithermal, Imagnetic &

automatic U/V trip mechanics for Battery Banks etc. complete as required & as per specifications.

UPS Testing with External Load Banks (To be provided by vendor) for 8 hours at full load shall be included in the offer incase Phantom

Loading feature as specified in the data sheet is not available in the UPS.

Supply, laying, testing & commissioning of flexible single core copper cable for interconnections between UPS to UPS, UPS to batteries( 10

m) , complete as required for each UPS.

TOTAL OF UPS & INVERTER SYSTEM CARRIED OVER TO SUMMARY Rs. 1016431.24

Supply, Installation, Testing and Commissioning of IP Based voice Communication System with 30 Concurrent calls, 4 FXO, 4 FXS, 1 E1/PRI

Gatewaty, 250 IP USERS, Muilti Level IVRS, Meet Me Conferece, Call Details Reports, Muliti level Recodring in SD Card or USB, WEB

2.1 MR Based GUI along with Advanced call features & Much More, Call Barring, Call Pickup, Circuit with Clip Facility, Redundent Server in Active- Nos. 1 682682.69 682682.69

Active Mode, including with all required licenses and software etc, complete as required at site.

2.2 MR SITC of IP Phone Nos. 2 18000.00 36000.00

2.3 MR SITC of Analag Phone Nos. 75 3500.00 262500.00

TOTAL OF IPBAX CARRIED OVER TO SUMMARY Rs. 981182.69

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

Qty in Revised

S No Item Specifications Qty Offered Price Amount Reference Image

Delimitation Net qty

Providing in place of main table with overall size of table 1650 x 1650 x 750mm. The main table shall be of size 1650 x 750 x 750mm.

The side unit shall be 900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work

surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with

0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to

IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of

1 E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre- 10 6 4 71,051.22 2,84,204.89

Table laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of

25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE

type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing &

anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height.

The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high

resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is

47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x

0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane

and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube

having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed

2 Main Chair with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more 10 6 4 23,705.73 94,822.91

comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair,

Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is

integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the

up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit

individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast

polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5

nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 – 53.1 cm Seat Height.

The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high

resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is

47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x

0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane

and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube

having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed

3 Visitor Chair with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more 20 18 2 22,123.91 44,247.82

comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair,

Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is

integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the

up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit

individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast

polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5

nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200

including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white

board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated

/prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm

decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion having average wall

thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary of these

blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the mid

Workstation segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be 55

1500 x 1500 offered in variety of combinations. The fins along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board

with flat pvc lipping edge banding of size 1500mm W1 x 1500mm W2 x 750D x 750H. Brackets shall be made from 2mm thick CRCA

steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm

height 3dr = 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

Qty in Revised

S No Item Specifications Qty Offered Price Amount Reference Image

Delimitation Net qty

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in

seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are

cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without

Workstation / need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back

movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector

moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle

Chair recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled

Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide

and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of

the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Main worktop shall be of size 1500mm x 600mm x 750mm. Side unit shall be 900mm x 450mm. Main worktop and Return Unit top shall

be made from 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded

with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Modesty panel shallbe made of

18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade. Cube legs are fabricated from MS ERW Tube of 50

mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm

thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is

coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8

7 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members are made from 50mm X 25mm X 1.2mm thick ERW 10 0 10 26,915.03 2,69,150.33

Module tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC

joinery and grub screws. There are always two cross members for one table. Soft closing access flap is used with provision for

standard size of 8 module electrical (Anchor Roma) is offered. Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8

Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Made of 18mm Thick Pre-

laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and

lock for security.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in

seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are

cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without

need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back

8 Main Chair movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector 10 0 10 13,026.86 1,30,268.61

moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle

recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled

Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide

and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in

seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are

cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without

need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back

movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector

moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The adjustable armrests

assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The powder coated

tubular frame is cantilever type and made of dida 2.54cm x 0.3cm thik MS ERW tube. Shoes are made of glass filled POly amide and

fixed to thw tubular frame. The overall dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

Qty in Revised

S No Item Specifications Qty Offered Price Amount Reference Image

Delimitation Net qty

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height.

The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high

resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is

47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x

0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane

and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube

having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed

10 with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more 1 1 23,705.73 23,705.73

Main Chair comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair,

Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is

integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the

up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit

individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast

polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5

nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 – 53.1 cm Seat Height.

The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high

resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is

Meeting Room 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x

0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane

11 and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube 16 12 4 22,123.91 88,495.63

Conferencing having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed

Room Chairs with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more

comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair,

Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is

integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be

made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat

should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should

be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood

of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be

made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat

should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should

be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood

of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be

made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat

should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should

be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood

of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

15 Center Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table 1 1 0 14,275.70 -

shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

16 Side Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table 2 2 0 7,489.22 -

shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

Qty in Revised

S No Item Specifications Qty Offered Price Amount Reference Image

Delimitation Net qty

It consists of storage units 457 mm deep and 915mm width– fixed or movable – bolted to Undercarriage which rolls onto the channels,

which, are firmly fixed to the ground. Each of above configurations can have following type of blocks – 1. Single Static (SS) 2. Single

Last (SL) 3. Twin Mobile(TM) – 2 body back to back. Construction shall be made out of 0.8 thk. CRCA Steel conforming to IS: 513

Gr.D. Each body block (SS/SL/TM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3,

4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. Optimizer Height

from ground is 2080 mm (1980 body + 65 under-structure + 35 channel system). Width shall be 915mm. The bodies including shelves

are given anti-rust surface treatment & are powder coated with epoxy polyester powder. Final finishing is done by a Dry Film Thickness

of minimum 45 (+\- 5) microns. Shelves are having 10 bends & its max load bearing capacity is 80 Kg uniformly distributed per shelf.

The Undercarriage is a welded frame made of HR sheet 2 & 3.15 mm thk conforming to IS:1079 suitably fabricated to take the loads

based on configuration. The movement of units is achieved mechanically through a PU Drive wheel and 'Sprocket-Chain-Tensioner'

arrangement mounted rigidly onto body side. The torque from hand wheel is transfer to drive shaft via sprocket chain arrangement. ,

each movable undercarriage is provided with 3 rollers on the shaft for driving, 3 anti-friction ball bearings for rolling and 4 anti-friction

ball bearings for guiding between rails. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of

Single Last unit so that it gets locked on channels when all the units are brought together. The nuts & bolts are galvanized / blackodized

/ Zn Plated. It consists of 'J' section 2 mm thk HR sheet & 25 mm Square bright bar - both connected by screws. Movement of units

achieved by pushing or pulling Chrome plated 'C' handle fitted onto 1.6 mm thk plate (mounted on each double & single movable units)

& rigidly fixed at suitable height on body side. Each movable undercarriage has 4 nos. of anti-friction ball bearings for rolling onto

channels & 4 nos. of anti-friction ball bearings for guiding between channels & 'J' section.

Digitally signed by AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES - HVAC WORKS

S. No. AND VRF DESCRIPTION UNIT QUANTITY RATE DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 80.00 16415.00 1313200.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply,installation,testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter,fan section with low

noise fan/ dynamically balanced blower, multi speedmotor ,coil section with DX copper coil,

electronic expansion valve, outer cabinet ,cordless remote control,drain pan,necessary

2 3.0 accessories etc., suitable for operationon 230V±10%, 50Hz, single phase AC supply,complete

as required. The unit shall have automatic force shutdown provision in case of fire on

receiving signal from BMS System.The cooling capacity of indoor unit will be at air inlet

conditions of 27Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

3 Joints i.e. Refnet Joints/Header with Insulation for refrigearnt piping

4 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 60.00 245.00 14700.00

4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 300.00 331.00 99300.00

4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 60.00 466.00 27960.00

1 4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 300.00 588.00 176400.00

Digitally signed by AMIT

4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m AMIT

SINGH 20:12:43 IST

Interior fit out works in the office space of Election Commission of India, Jeevan Tara Building, New Delhi

SCHEDULE OF QUANTITIES - HVAC WORKS

S. No. AND VRF DESCRIPTION UNIT QUANTITY RATE DSR (INR) NON-DSR (INR)

4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50.00 865.00 43250.00

4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 25.00 1022.00 25550.00

4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 25.00 1108.00 27700.00

5 Cable/Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

DSR (E & M - Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

4.6 convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

6.1 4.6.8 300 mm width X 62.5 mm depth X 2.0 mm thickness meter 20.00 1085.00 21700.00

6.2 4.6.10 450 mm width X 62.5 mm depth X 2.0 mm thickness meter 20.00 1440.00 28800.00

7 Drain Piping

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

Total HVAC- VRV WORKS 2832322.00 444756.00

GRAND TOTAL 3277078.00

GRAND TOTAL 3277078.00

2 Digitally signed by AMIT

SINGH 20:12:43 IST