REPAIR RESURFACING OF ROAD FOR DOMESTIC AREA AT AF STN SURATGARH

Amount

Scarifying or picking gravelled macadam or bituminous macadam surface in area n.exc 400 sqm and exc.50mm & n.exc 100mm deep complete all as specified and directed by Engineer-in-Charge.

Material and labour for Repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 10 Kg per 10 Sqm (using bitumen emulsion (RS-1) confirming to IS -8887) putting in premixed bituminous macadam using paving bitumen of grade VG-10) blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot holes exceeding 30mm complete all as specified and directed by the Engineer in Charge.

Material and labour for premix bitunimuous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen complete all as specified and directed by Engineer-in-Charge (binder shall be of 4% weight of total mix).

Applying evenly a priming/ tack coat with bitumen emulsion (RS-1) confirming to IS -8887 of any penetration @ 10 Kg. Per 10 Sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engineer-in-charge.

Applying evenly a priming/ tack coat with bitumen emulsion (RS-1) confirming to IS -8887 of any penetration @ 5 Kg. Per 10 Sqm complete all as specified and as directed by Engineer-in-charge.

Material and Labour for providing and laying bituminous premix semi -dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix (using paving bitumen VG-30 grade confirming to IS-73-2013, laid & sprayed uniformly by means of Mechanical Paver, rolled and compacted to required camber and gradient with 8 to 12 ton power roller, complete all as specified and directed. Note:- (i) Mixing of bituminous concrete shall be in Hot Mix Plant. (ii) Semi dense asphaltic bituminous concrete shall be designed considering the bituminous contents as specified and as directed.

Material and Labour for cleaning and preparing the bituminous road surface and making good for road marking with reflective thermoplsatic white road marking paint confirming to BIS-3262, laid through Road Marking Machine in layer of CRYSTALX (using 5 kg per Sqm by incorporating 8% white glass beads for reflectivity) and 2mm thick centre line, stop line etc. as per IRC pattern laid at temperature 60 degree centigrade including making necessary traffic diverson arrangement complete all as specified and as directed.

Supply and fixing in repair dileaneator of ABS round body fiting with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50mm dia duly powder coated, antirust & antitheft steel net fixed on 600mm high pole with retroreflective tapes in red or yellow in color including fixing with PCC block of required size in (1:3:6 ) type C2 using 40mm graded aggregates in foundation after excavation of required depth & size complete all as specified and as directed by Engineer-in-charge. Make :- Dark Eye (Model DA 952 GP) or equivalant in 3M, Oscar Safety Solution/TATA/Sinor Infrastrature

Supply and fixing in repair aluminium alloy body stud/cat eye of size (110 x 120 x 23.5) mm for road surfaces complete all as specified and as directed by Engineer-in-charge. Make :- Dark Eye (Model DA 972) or equivalant in 3M, Oscar Safety Solution/TATA/Sinor Infrastrature

Supply and Fixing Dual directional solar road studs (Cat eye) made of Alluminium alloy shell of having 10 tons load bearing capacity , of size 125x125x25 mm(with a shank of 65mm) , die casted dynamically designed very high impact strength and cosisting of protection glassand 100 % water proof design according to IP 67 minimum 06 nos LED with minimum working hours 72-96 hours,view distance minimum 1000mm including 1.2 V nickel metal hydride rechargable battery to give back-up for atleast 3 days, as approved including fixed with epoxy complete all as specified. Make : - Dark Eye ( Cat Part No DA 110 (DHRUV) or equivalent in make Oscar Safety Solution/TATA/Sinor Infrastruture/3M

M/s Balaji Buildcon

Ram Parkash Constructions Pvt. Ltd.

M/S BUDHRAM BISHNOI

M/S Shree Ram Enterprises