REPAIR OF ALL TYPE OF WOODEN FURNITURE UNDER BSO, GE (SOUTH) UDHAMPUR

Amount

Sofa Set 5 seats FD-281/1113 :- Repair to sofa sets including dismantling of old broken parts and replacing with new teak wood parts as mentioned below. Seat and back cushions shall be replaced with new foam cushions 100 mm thick 40 density Make:- Kurlon/ Sleepwell duly covered with velvet cloth of superior quality as approved by GE cost of tapestry shall not be less than Rs. 200/- per mtr. Wooden frame of sofa set shall be set right . Rest complete all as specified and directed by Engr-in-Charge. Note:- New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of long rail as per Drg

Supply of short rail as per Drg

Supply of front legs as per Drg

Supply of rear legs as per Drg

Supply of arms as per Drg

Sofa Set 4 seats FD-281/1113:- Repair to sofa sets including dismantling of old broken parts and replacing with new teak wood parts as mentioned below. Seat and back cushions shall be replaced with new foam cushions 100 mm thick 40 density Make:- Kurlon/Sleepwell duly covered with velvet cloth of superior quality as approved by GE cost of tapestry shall not be less than Rs. 200/- per mtr. Wooden frame of sofa set shall be set right . Rest complete all as specified and directed by Engr-in-Charge. Note:- New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of long rail as per Drg

Supply of short rail as per Drg

Supply of front legs as per Drg

Supply of rear legs as per Drg

Supply of arms as per Drg

Sofa Set 2 seats FD-281/1113:- Repair to sofa sets including dismantling of old broken parts and replacing with new teak wood parts as mentioned below. Seat and back cushions shall be replaced with new foam cushions 100 mm thick 40 density Make :- Kurlon/Sleepwell duly covered with velvet cloth of superior quality as approved by GE cost of tapestry shall not be less than Rs. 200/- per mtr. Wooden frame of sofa set shall be set right . Rest complete all as specified and directed by Engr-in-Charge. Note :- New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of long rail as per Drg

Supply of short rail as per Drg

Supply of front legs as per Drg

Supply of rear legs as per Drg

Supply of arms as per Drg

Sofa singale seats FD-281/1113:- Repair to sofa sets including dismantling of old broken parts and replacing with new teak wood parts as mentioned below. Seat and back cushions shall be replaced with new foam cushions 100 mm thick 40 density Make :- Kurlon/Sleepwell duly covered with velvet cloth of superior quality as approved by GE cost of tapestry shall not be less than Rs. 200/- per mtr. Rest all as directed by Engr-in-Charge. Note:- New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of long rail as per Drg

Supply of short rail as per Drg

Supply of front legs as per Drg

Supply of rear legs as per Drg

Supply of arms as per Drg

Bed ply top FD-246 :- Repair to bed ply top including dismantling of old broken parts and replacing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note :- New parts as mentioned here in after shall be measuread and paid separately as supply only. Make of Plywood :- Kitply/Centuryply

Supply of ply wood one side teak face 3 mm thick BWR for head board inner side as per Drg.

Supply of ply wood one side teak face 3 mm thick BWR for head board outer side as per Drg.

Supply of ply wood one side teak face 3 mm thick BWR for foot board inner side as per Drg.

Supply of ply wood one side teak face 3 mm thick BWR for foot board outer side as per Drg.

Supply of Teak wood long rails as per Drg

Supply of Teak wood head side legs as per Drg

Supply of Teak wood foot side legs as per Drg

Supply of ply wood 12 mm thick commercial quality BWR type for top of bed as per Drg

Table 900 x 600 x 760 mm with out drawer FD-55(M)/42(M)/284 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 75 x 75 mm teak wood triangular corners between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: - New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply new tops of pre-laminated particle board 18 mm thick exterior grade BWR with one side teak face other side balancing white with all round 4 mm thick teak wood beading as per Drg.

Supplying new legs of first class sheesham wood, as per Drg.

Supply new top long rails of first class sheesham wood, as per Drg.

Supply new top short rails of first class sheesham wood, as per Drg.

Supplying new “H” Type stiffeners complete of first class hard wood sheesham as per Drg.

Supplying new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table 900 mm x 600 mm x 760 mm with drawer FD-41(m) & 283 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade BWR with one side teak face other side balancing white with all round 4 mm thick teak wood beading as per Drg.

Supply new legs of first class sheesham wood, as per Drg.

Supplying new top long rails of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg

Supply of new drawer of deodar wood except bottom which shall be of 6mm thick ply wood commercial. Front portion of drawer shall be of sheesham wood, as per Drg.

Supply of new “H” type stiffener complete of first class hard wood sheesham as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table 900 mm x 900 mm x 760 mm FD-94(M) & 291:- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 75 mm x 75 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face other side balancing white with all round 4 mm thick teak wood beading as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Shoes and supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table Dining 6 persons FD-273 & FD - 239 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 100 mm x 100 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade with one side teak face other side balancing white with 4 mm thick teak wood beading all round as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of sheesham wood, as per Drg.

Supply of new top short rail of sheesham wood, as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table office officer wooden DB-4119 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 100 mm x 100 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note : New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade BWR with one side teak face other side balancing white with all round 4 mm thick teak wood beading as per Drg.

Supply of new drawer of deodar wood except bottom which shall be of 6 mm thick ply wood commercial. Front portion of drawer shall be of sheesham wood with knob as per Drg.

Supply of new shutter of block board 19 mm thick one side teak shade with knob and hinges complete as per Drg.

Table office clerk wooden DB-4129 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 100 mm x 100 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18mm thick exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Supply of new drawer of deodar wood except bottom which shall be of 6mm thick ply wood commercial. Front portion of drawer shall be of sheesham wood as per drg.

Supply of new stiffener complete ‘H’ type of first class hard wood sheesham as per Drg.

Table dressing gents FD-31(m) /230 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: - New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top made out of pre-laminated particle board 18 mm thick exterior grade with one side teak face other side balancing white as per Drg.

Supply of new right/left side made out of pre-laminated particle board 18/19 mm thick exterior grade with one side teak face other side balancing white as per drg.

Supply of new bottom made out of 19 mm thick block board commercial BWR. Type exterior gde as per drg.

Supply of new Electro copper plated mirror 5 mm thick with sheesham wood frame as per Drg. Make : Saint Gobain/Modi guard.

Supply of new drawer made out of deodar wood except bottom and front. Bottom shall be 6 mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18 mm thick one side teak face with anodized copper plated knob as per Drg.

Supply of back new ply wood commercial 12 mm thick (BWR) as per drawing.

Table dressing Ladies FD-251 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: - New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top made out of pre-laminated particle board 18 mm thick exterior grade with one side teak face other side balancing white as per Drg

Supply of new bottom made out of 18/19 mm thick block board commercial BWR as per Drg

Supply of legs made out of first class sheesham wood, as per Drg.

Supply of new drawer made out of deodar wood except bottom with Knob 25 mm. Bottom shall be 6 mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18 mm thick one side teak face with anodize copper plated knob as per Drg.

Supply of looking mirror 5 mm thick superior quality make saint Gobain/ Modiguard with teak wood frame and ply wood 6 mm thick commercial quality on back complete as per drg.

Supply of new sliding glass shutter 5 mm thick duly rounded edges complete as per Drg.

Supply of new aluminium channel as per Drg.

Supply of new ply wood commercial 12 mm thick as per Drg.

Table Centre FD-274 & 235 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: - New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick one side teak face other side balancing white exterior grade BWR with all round 4 mm thick teak wood beading as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Teapoy FD-278 & 232 :- Repair to teapoy including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: - New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick one side teak face other side balancing white exterior grade with all round 4 mm thick teak wood beading as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Stool dressing FD/E6/MAP/14:- Repair to stool dressing including dismantling of old broken parts and replace with new teak wood parts as mentioned below. Seat cushions shall be replaced with new foam cushions 75 mm thick 40 density Make :- Kurlon/ Sleepwell duly covered with velvet cloth of superior quality fixed with 12 mm BWR grade plywood as approved by GE, cost shall not be less than Rs. 150/- per mtr. Wooden frame of sofa set shall be set right . Rest complete all as specified and directed by Engr-in-Charge. Note:- New parts as mentioned here in after shall be measured and paid separately as supply only. Taking out of old unserviceable legs and supply and fixing of Sheesham wood new legs as per drawing.

Supply of sheesham wood new top long rails as per drawing.

Supply of sheesham wood new top short rail as per drawing.

Supply of sheesham wool new stiffener complete as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Supply of new legs of Sheesham wood new legs as per drawing.

Table 600 mm x 600 mm x 760 mm FD-95 :- Repair to table including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 75 mm x 75 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18mm thick one side teak face other side balancing white exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg.

Supply of new "H" Type stiffener complete of first class hard wood sheesham as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Book Case FD-45 & 237 :- Repair to Book case including dismantling of old broken parts and fixing with new parts as mentioned below. Book case shall be teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply new top made out of 18 mm thick pre-laminated particle board exterior grade one side teak face other side balancing white.

Supply new side made out of pre-laminated particle board exterior grade 18mm thick one side teak face other side balancing white as per Drg.

Supply new bottom/back side made out of 18/19 mm thick block board commercial type BWR

Supply of new shelves/partition made out of 18 mm thick pre-laminated particle board exterior grade one side teak face other side balancing white as per Drg.

Supply new shutter made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white with piano type hinges, aluminium handle and catcher as per drg.

Side Board FD-126(m)/241:- Repair to Side board including dismantling of old broken parts and fixing with new parts as mentioned below. Side board shall be teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white.

Supply of new side right/left made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white.

Supply new shutter made out of 18 mm thick pre-laminated particle board exterior grade one side teak face other side balancing white complete with piano hinges anodized copper coated knob. Tower bolt 150 mm and brass lock as per Drg

Supply new bottom made out of 18/19 mm thick block board commercial BWR as per Drg

Supply of new shelves/partition made out of 18/19 mm thick block board commercial as per Drg.

Supply new back ply wood 6 mm thick commercial as per Drg.

Supply of new drawer made out of deodar wood except bottom. Bottom shall be 6 mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18 mm thick teak face with anodized copper plated knob

Supply of new new leg made out of first class sheesham wood.

Peg Table FD-235 :- Repair to Peg table including dismantling of old broken parts and fixing with new parts as mentioned below. Peg table shall be teak wood rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg.

Supply of new stiffener complete of first class hard wood sheesham as per Drg.

Supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Repair to Table Writing FD-275 :- Repair to Table writing including dismantling of old broken parts and fixing with new parts as mentioned below. Table writing shall be teak wood rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face other side balancing white with all round 4 mm thick teak wood edging, as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of first class sheesham wood, as per Drg.

Supply of new top short rail of first class sheesham wood, as per Drg.

Supply of new drawer of deodar wood except bottom which shall be of 6 mm ply wood commercial. Front portion of drawer shall be of sheesham wood with anodized knob

Supply of new shutter of table writing made of pre-laminated particle board exterior grade 18 mm thick one side teak face as per drg.

Supply of new stiffener complete of first class hard wood sheesham as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table Bed Side FD-276 /FD/MAP /07:- Repair to Table bed side including dismantling of old broken parts and fixing with new parts as mentioned below. Table bed side shall be teak wood rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white as per Drg.

Supply new right/left side of table bed side made out of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white.

Hat Stand FD-23/233 :- Repair to Hat stand including dismantling of old broken parts and fixing with new parts as mentioned below. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new mirror electro copper plated 5 mm thick. Make:- saint Gobain/Modiguard.

Supply of new peg CP brass 120 mm x 75 mm as per Drg

Table Dining 8 persons FD-273 :- Repair to table dining 8 pers including dismantling of old broken parts and fixing with new parts as mentioned below. Table shall be set right by providing 100 mm x 100 mm teak wood triangular corner between rails and legs. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned here in after shall be measured and paid separately as supply only.

Supply of new top of pre-laminated particle board 18 mm thick exterior grade one side teak face other side balancing white with 4 mm thick teak wood beading all round as per Drg.

Supply of new leg of first class sheesham wood, as per Drg.

Supply of new top long rail of sheesham wood, as per Drg.

Supply of new top short rail of sheesham wood, as per Drg.

Supply of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Chair wooden bottom FD-285 & FD-225 :- Repair to chair wooden bottom including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of plywood 6 mm thick for seat of chair duly perforated.

Supply of rails for chair as per drg

Supply of front legs as per drg

Supply of rear legs as per drg

Supply of back stiffeners as per drg

Supply of stiffeners H type complete as per drg

Chair Dining FD-279 & FD-228:- Repair to chair Dining including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Chair shall be recanning with 2 mm wide half round cane plastic in godrej pattern with border of 3 mm wide cane plastic. Cane shall be of premier brand. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of rails for chair as per drg

Supply of front legs for chair as per drg

Supply of rear legs for chair as per drg

Supply of back stiffeners for chair as per drg

Supply of stiffeners H type complete for chair as per drg

Chair Dining FD/MAP-II/04 :- Repair to chair Dining including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Seat shall be replaced with new foam cushions 75 mm th 40 density covered with velvet/tapestry cloth cost hall not be less then 150/- per mtrs and fixing with 12 mm BWR grade ply (as per drg). Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of rails for chair as per drg

Supply of front legs for chair as per drg

Supply of rear legs for chair as per drg

Supply of back stiffeners for chair as per drg

Supply of stiffeners H type complete for chair as per drg

Supply of stopper as per drg

Chair Dining FD/MAP-II/05 :- Repair to chair Dining including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Seat shall be replaced with new PVC Seat 4 MM thick with hole & fixing with screw as per Drg. Rest all as directed by Engineer-in Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of rails for chair as per drg

Supply of front legs for chair as per drg

Supply of rear legs for chair as per drg

Supply of back stiffeners for chair as per drg

Supply of stiffeners H type complete for chair as per drg

Supply of stopper as per drg

Chair writing FD-280 & FD-250 :- Repair to chair writing including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Chair shall be recanning with 2 mm wide half round cane plastic in godrej pattern with border of 3 mm wide cane plastic. Cane shall be of premier brand. Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of rails for chair as per drg

Supply of front legs for chair as per drg

Supply of rear legs for chair as per drg

Supply of back stiffeners for chair as per drg

Supply of stiffeners H type complete for chair as per drg

Supply of Arms for chair as per drg

Chair Easy FD-229 :- Repair to chair Easy including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Chair shall be recanning with 2 mm wide half round cane plastic in godrej pattern with border of 3 mm wide cane plastic. Cane shall be of premier brand. Rest complete all as specified and directed by Engr-in-Charge. Note : New parts as mentioned herein after shall be measured and paid separately as supply.

Supply of side rails for chair as per drg

Supply of front rails for both seat & back of chair as per drg

Supply of back rails for both seat & back of chair as per drg

Supply of stiffeners for chair as per drg

Supply of Arms for chair as per drg

Supply of legs for chair easy as per drg

Chair Dining TP:- Repair to chair Dining including dismantling of old parts and replace with new parts of teak wood as mentioned below and setting right all other existing parts. Seat shall be replaced with new foam cushions 75 mm th 40 density covered with velvet/tapestry cloth cost hall not be less then 150/- per mtrs and fixing with 12 mm BWR grade ply (as per drg). Rest complete all as specified and directed by Engr-in-Charge. Note: New parts as mentioned herein after shall be measured and paid separately as supply.

Shamboo nath and co