Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC CAMP INS CHILKA CHHATRAGARH PO NB CHILKA ODISHA 752 037 | KHORDHA | ODISHA | 752037 | ₹34.2 L Quoted ₹35.4 L | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹37.5 LRejected-Finance AT BRAJARAJPUR PO INS CHILKA DISTT KHORDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | ₹37.5 L | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹40.8 LRejected-Finance | ₹40.8 L | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | HARI PALAI L1 | BHARAT KUMAR BALL L2 | SANJAYA KUMAR PALAI L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles from site. | 1,052 | Sqm | 5 ₹5,260 | 45 ₹47,340 | 26 ₹27,352 |
| 2.00 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar complete all as specified and as directed. | 0.28 | 10 Sqm | 20 ₹5.60 | 600 ₹168 | 300 ₹84 |
| 3.00 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms fixed over and including 15mm screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 2.75 | Sqm | 3,500 ₹9,625 | 3,800 ₹10,450 | 4,500 ₹12,375 |
| 4.00 | Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work. | 5 | RM | 100 ₹500 | 45 ₹225 | 100 ₹500 |
| 5.00 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles fixed over and including 15 mm thick screed bed in CM (1:4) etc complete all as specified and as directed | 317 | Sqm | 1,100 ₹3.5 L | 1,095 ₹3.5 L | 1,350 ₹4.3 L |
| 6.00 | S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as in skirting / dado tiles fixed over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed. | 692 | Sqm | 1,100 ₹7.6 L | 1,105 ₹7.6 L | 1,300 ₹9.0 L |
| 7.00 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over and including cement screed 15 mm thick in CM 1:6 etc complete all as specified and as directed. | 43 | Sqm | 900 ₹38,700 | 990 ₹42,570 | 1,050 ₹45,150 |
| 8.00 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) removing to or from store complete all as specified and as directed. | 90 | Each | 50 ₹4,500 | 200 ₹18,000 | 140 ₹12,600 |
| 9.00 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames)removing to or from store complete all as specified and as directed. | 10 | Each | 50 ₹500 | 250 ₹2,500 | 220 ₹2,200 |
| 10.00 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. | 330 | Kg | 500 ₹1.6 L | 498 ₹1.6 L | 590 ₹1.9 L |
Updated dates
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
8 Dec 2025, 6:00 pmClosed
Ankit Kumar, IDSE, EE, GE CHILKA
GE CHILKA, INS CHILKA, KHURDA, ODISHA 752 037
SPECIAL REPAIRS TO COMMON TOILETS OF ALL UNDER TRAINEE AGNIVEER DIVISION (BLDG NO T164 T162 T45 T71 AND T202) AT INS CHILKA
2025_MES_738740_1
GE/CHL/8123 OF 2025-26
Open Tender
Civil Works
180 days
GARRISON ENGINEER CHILKA
MES Enlisted contractor of Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CHILKA
₹95,000
Yes
17 Jan 2026
7 Nov 2025
10 Dec 2025
7 Nov 2025
8 Dec 2025
17 Nov 2025
10 Nov 2025 - 15 Nov 2025
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles from site.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms fixed over and including 15mm screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles fixed over and including 15 mm thick screed bed in CM (1:4) etc complete all as specified and as directed
S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as in skirting / dado tiles fixed over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over and including cement screed 15 mm thick in CM 1:6 etc complete all as specified and as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) removing to or from store complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames)removing to or from store complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F 4 mm thick of sheet glass, ordinary quality and glazing with glazing clips, rubber packing, powder coated aluminium snap beading in square n exc 0.5 sq. m in each pane all as specified and as directed.
S&F 4 mm thick of frosted on one side sheet glass, ordinary quality and glazing with glazing clips, rubber packing, powder coated aluminium snap beading in square n exc 0.5 sq. m in each pane all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with powder coated aluminium snap beading, screws complete all as specified and as directed
S&F Powder coated aluminium (minimum thickness of powder coating 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed
S&F medium weight, stainless steel butt hinges of 100mm size, complete all as specified and as directed. Make : Prayag Cat No PHW-46
S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 125mm with dia of shoot / bolt 8mm complete all as specified and as directed.
S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:4 mixed with WPC @ 200ml per 50 kg by weight of cement content including finishing even and smooth withour using extra cementcomplete all as specified and directed. Note :- Liquid water proofing compound shall be measured and paid separately.
Supply only liquid water proofing compound.
M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6 including finishing even and smooth withour using extra cement complete all as specified and directed.
M&L for preparation of newly plastered external wall with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer's instruction as per required shade by user complete all as specified and as directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed.
M&L for complete removal of existing treatment from old decorated plastered surface of wall,removal of nails etc & filling cracks/hole and with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer's instruction as per required shade by user complete all as specified and as directed.
M&L for complete removal of existing treatment from old decorated plastered surface of wall and applying three coat of white wash on walls complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth of any and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed.
S&F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end used for WHB/sink complete all specified and as directed.
S&F in repair wash hand basin vitreous china white flat back of size 580 X 450mm including cutting for and pinning in ends of bracket or erecting stand, complete all as specified and as directed.
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including WC connector (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete all as specified & directed.
S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets and flush pipe 32 mm dia including joints complete all as specified and directed
S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed
S&F in repair PVC soap tray fixing with screw in the all as specified
S&F as in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weigh 190gms) complete all specified and as directred.
S&F in repair 32 mm dia size PVC waste pipe for wash hand basin .
S&F in repair PVC floor trap including jointing with solvent cement to waste pipe 75 mm dia
S&F in repairs 100mm dia grating doom of PTMT (minimum wt.25 gms complete all as specified and directed.
S&F in repairs swivel shower rose with shower arm of 15mm size,195mm long of PTMT any colour for fixing with 15mm dia GI pipe complete all as specified and directed.
S&F in repair 15 mm dia of bore angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)
S&F in repairs Stop valve of 15 mm bore of PTMTany colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/ 20mm 92gms) complete all as specified and directed.
S&F in repairs Bib tap of 15mm dia standered of PTMT ISI Marked any colour screwed, for iron pipe and fixed (min. weight 15mm - 90gms)complete all as specified and directed.
Supply and fix,as in repair,15 mm bore fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms all as specified and directed.
Supply and fix, as in repairs, Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified and directed.
S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white with grating,union and waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.
S&F in repairs vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line,urinal complete all as specified and as directed.
S&F as in repair LDPE PVC pipe 50mm dia pressure rating 6kgf/cm2 fixed as in wall,floor to receive waste water from wash hand Basin/Kitchen sink /urinal all as specified and as directed.
S&F 2000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed.
Disconnecting existing tanks of capacity 2000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning, repairs, etc. measured seperately.)
Cleaning and removing all scale and dirt, etc, for 2000 litre capacity tanks and from mouths of circulating pipes, etc complete all as specified and as directed.
S&F in repair 40 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 50 mm dia/bore complete all as specified & directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 40 mm dia/bore complete all as specified & directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 32 mm dia/bore complete all as specified & directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 25 mm dia/bore complete all as specified & directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 20 mm dia/bore complete all as specified & directed.
Taking down and Refixing old 50mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
Taking down and Refixing old 40mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
Taking down and Refixing old 32mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
Taking down and Refixing old 25mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
Taking down and Refixing old 20mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
Taking down and Refixing old 15 mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 50mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 40mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 32mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 25mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 20mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed in 15mm bore of pipe complete to walls and ceilings complete all as specified & directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75 mm bore.
S&F in repairs 110 bore PVC (SWR) bends any radius complete all as specified and directed
S&F in repairs 110 bore PVC (SWR) vent cowl complete all as specified and directed
S&F in repairs 75 bore PVC (SWR) bends any radius complete all as specified and directed
S&F in repairs 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed
S&F in repairs 110 bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed
S&F in repairs Stack clamps for 100 mm pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr-in-Charge.
S&F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F in repairs Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F in repairs 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position
M&L for second class hard wood timber in clean sawn scantlings
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed.
M&L for one coat of synthetic enamel paint to old decorated wooden surfaces of girth over 10 cm incl preparation of surfaces.
Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and as directed.
M&L for providing, plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic , chajja and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and as directed.
M&L for 75mm thick plain cement concrete 1:3:6 typeC2 using 40 mm graded stone aggregate as Sub base of flooring complete all as specified and directed
M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in subbase floor finish complete all as specified and directed.
M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection finishing even and smooth (without using extra cement) & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic filler complete all as specified and directed by Engr-in-Charge
Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .
M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 2x 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)
All as per above item but one 3 pin socket outlet 5 Amps on same board.
S&F in repairs Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 1.5 Sqmm and one run of 1.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 1.5 Sqmm copper wire,one run of 1.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision)
S&F Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells
S&F Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt . Make:- Anchor/ Cona/Havells.
S&F Ceiling rose,3 terminal PVC/poly carbonate isolated body. Make:- Anchor / Cona/Havells.
S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:DUDBDD06 of HPL or equvalent toHavells /Standard/Legrand/L &T)
S&F in repairs MCB, SPN. 32 Amps rating 240, volt, 'C' series, 10 kA (Make Havells DHMZCSNF006-032 or standard/Legrand/HPL/L & T)
S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make Havells,Cat No.DHMZCSPF006-032 or equvalent to Standard/Legrand/HPL/L & T)
S & F in repairs LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Phillips/Havells/ Wipro/ Crompton.
Supply and fixing in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complet Crompton /Phillips/Havells/Wipro )
Supply & fixing in repair Building security light fitting, for lighting up gated communities, gardens and municipal roads. It uses a unique air vent technology which keeps temperatures low, needless to say this allows the LEDs to shine even brighter. The light also has an inbuilt surge protection. IP66 Efficacy ≥110LP Pole Dia : 32-40mm 25 watt.including provn of necessary connection complete.(Make/ Model:-Crompton Cat No . TRP-415-25-57-SL-LM-NBK or equivalent make of Phillips/Havells/Wipro)
Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)
M&L for Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire
Supply and fixing in repair of GI pipe,40 mm dia 'light grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors for cable protection all as specified and directed.
Remove exhaust fan and refixing the same in same place after repair all as specified and ditected
M&L for Painting of exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.
M& L for Rewinding of exhaust fan motor of type 380/300 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed by Engineer- in -Charge.
Supply and fix in repair exhaust fan capacitor 4 mfd of approved make complete all as directed by Engineer-in-Charge. MAKE: NICCO/Universal/Havells.
Supply and fix in replacement of new ball bearing 6201 / 6202 / 6203 including metal filling, machining if required, complete all as specified. Make : SKF/NBC
Supply and fix in inreplacement of louvers suitable for 300 mm sweep exhaust fan made out of GI sheet 1.2 mm thick and 0.45 mm thick louvers flap .
Supply & fixing in repairs 60 Watt High Performance street lighte aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy > 110/120 LPW, available with 10KV SPD. Pole Dia.: 48-60mm all as specified and directed. (Make/ Model:- Crompton, Cat No .TRP-409-60-57-SL-GL-NSG or equivalent make of Phillips/Havells/ Wipro)
BHARAT KUMAR BALL (BID ID -3486070)
SANJAYA KUMAR PALAI (BID ID -3487103)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
BOQ_827189.xls
BOQ • 1.12 MB
8123Tenderpages.pdf
Tender Documents • 0.75 MB
Download all tender documents and submit your bid