REPAIRS, MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING FLP FITTING AND OTHER CONNECTED WORKS AT HEMRL UNDER GE RnD PASHAN

Amount

Taking down existing unserviceable submain wiring any type alongwith complete accessories at any height and making good the disturbed surfaces Complete all as specified and directed by Engineer-in-charge.

Material and labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 1.5 sq. mm with 1 run of 1.5 sq. mm earth wire including concealed PVC conduit of size not less than 19mm dia at any height as required complete all as specified and directed by Engineer-in-charge.

Material and labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 2.5 sq. mm with 1 run of 2.5 sq. mm earth wire including PVC conduit of size not less than 19mm diaat any height as required complete all as specified and directed by Engineer-in-charge.

Material and labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 4 runs of 2.5 sq. mm with 1 run of 2.5 sq. mm earth wire including PVC conduit of size not less than 19mm dia at any height as required complete all as specified and directed by Engineer-in-charge.

Material and labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 4 sq. mm with 1 run of 4 sq. mm earth wire including PVC conduit of size not less than 19mm dia at any height as required complete all as specified and directed by Engineer-in-charge.

Material and labour for wiring for circuit/submain wiring with the FRLS PVC insulated copper conductor single core cable 2 runs of 6 sq. mm with 1 run of 6 sq. mm earth wire including PVC conduit of size not less than 19mm dia at any height as required complete all as specified and directed by Engineer-in-charge. Note:-For item no 2,3,5 & 6 Two run of 1.5 / 2.5 /4 / 6 sqmm ( 1 phase and 1 neutral ) with one run earth wire alongwith conduit will be measured as one unit Note:- For item no 4 Four run of 2.5 sqmm ( 3 phase and 1 neutral ) with one run earth wire alongwith conduit will be measured as one unit.

Supply and fixing point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including concealed PVC conduit of size not less then 19mm with all fittings and accessories with MS box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc;at any height including one continous run of PVC insulated green colour 1.5 sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly including cutting chasses or making hole for fixing of MS sunken box in wall complete and making good disturbed surface of walls, floors, etc.Complete all as specified and directed forone light /fan point controlled by one way switch.

All as per Ser item 7 above but for one 3 pin socket out let 5 Amp independent point Complete all as specified and directed.

All as per Ser item 7 above but for one 3 pin socket out let 5 amp point on the same board with other switches Complete all as specified and directed.

All as per Ser item 7 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly Complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistranded copper conductor FRLS cable drawn into existing conduit concealed into wall or on surface with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc.Complete all as specified and directed for one light /fan point controlled by one; one way switch.

All as per Ser item 11 above but for Two light point controlled by two; two way switch Complete all as specified and directed.

All as per Ser item 11 above but for one fan / exhaust fan point controlled by one; one way switch Complete all as specified and directed.

All as per Ser item 11 above but for one 3 pin socket out let 5 amp independent point Complete all as specified and directed.

All as per Ser item 11 above but for one 3 pin socket out let 5 amp point on the same board with other switches Complete all as specified and directed.

All as per sl item 11 above but with 2.5 sq mm size PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly Complete all as specified and directed.

Taking down copper/aluminium point wiring casing & caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc Complete all as specified and directed.

Taking down copper/aluminium point wiring PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc Complete all as specified and directed.

Taking down copper/aluminium point wiring except PVC conduit / Steel conduit pipe (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc Complete all as specified and directed.

Taking down flameproof switch socket combination single phase / three phase complete all as directed and making good disturbed surface of walls, floors, etc Complete all as specified and directed.

Material and labour for taking down carefully ceiling fan 1200 / 1400 mm sweeps at any height including fan blades, down rod for cleaning dust, removing cavaties and painting with white synthetic enamel paint by spray paint and pasting soft stickers indicating MES No of 25 mm size each letter with black synthetic enamel paint and making good disturbed surface of walls, floors, etc. Complete all as specified and directed by Engr-in-charge.

Supply and fixing point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including surface PVC casing capping of suitable size with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; at any height including one continous run of PVC insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete and making good disturbed surface of walls, floors, etc. Complete all as specified and directed for one light point controlled by one; one way switch.

All as per Ser item 23 above but for one fan / exhaust fan point controlled by one; one way switch Complete all as specified and directed.

All as per Ser item 23 above but for one 3 pin socket out let 5 amp independent point Complete all as specified and directed.

All as per Ser item 23 above but for one 3 pin socket out let 5 amp point on the same board with other switches Complete all as specified and directed.

All as per Ser item 23 above but for one bell / buzzer point controlled by one; one way switch Complete all as specified and directed.

All as per Ser no item 23 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly Complete all as specified and directed.

Supply and fixing Flameproof switch of LM 6 body, rotary switch, SP, 16 Amps for ON / OFF light / fan point to operate on single phase 230 Volts, AC CMRI certified IS-2145.Make:- Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga Complete including taking down existing unserviceable FLP switch all as specified and directed.

Supply and fixing flameproof switch socket combination suitable for 2P+E 16 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked Complete including taking down existing unserviceable switch socket combination all as specified and directed by Engineer-in-charge Make:- Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga

Supply and fixing Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 70 Watt with lumen out put not less than 9000 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistar including suitable electronic including necessary fixing arrangments at any height and connecting up Complete including taking down existing unserviceable switch socket combination all as specified and directed Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass. Make:- Shyaam Switchgear Cat no SSPL/1233 or in Flexpro / Baliga

Supply and fixing flameproof switch socket combination 2P+E suitable for 25 Amps to 32 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked Complete including taking down existing unserviceable switch socket combination all as specified and directed by Engineer-in-charge.Make:- Shyaam Switchgear / Flexpro / Baliga

Supply and fixing FLP stainless steel hose conduit 20 mm dia 300 mm long Complete including taking down existing unserviceable hose all as specified and directed Make:- Shyaam Switchgear / Flexpro / Baliga

Supply and fixing Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 45 Watt with lumen out put not less than 4500 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistarincluding suitable electronic including necessary fixing arrangments at any height and connecting up Complete including taking down existing unserviceable fitting all as specified and directed Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass.Make:- Shyaam Switchgear Cat no SSPL/1233 / Flexpro / Baliga

Supply and fixing Switch piano, flush type single pole, one way, 5 Amps, 240 volts Complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 6A Complete all as specified and directed.

Supply and fixing Socket outlet 3 pin, 16 Amp, flush type Complete all as specified and directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 Amp, flush type Complete all as specified and directed.

Supply and fixing switch socket combination 5 in 1, 6 pin, 5A/16A flush type Complete all as specified and directed.

Supply and fixing Ceiling rose surface Bakelite, 65x50mm three terminals 230 Volts, AC Single phase Complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required Complete all as specified and directed.

Supply and fixing of Modular switch 1 way 6A,1 module Complete including taking down existing unserviceable switch all as specified and directed.

Supply and fixing of Modular switch 1 way 16A,1 module Complete including taking down existing unserviceable switch all as specified and directed.

Supply and fixing of Modular Socket, 6A - 2/3 pin combined 2 module Complete including taking down existing unserviceable socket all as specified and directed.

Supply and fixing of Modular Socket 6A/16A - 2/3 pin combined 2 module Complete including taking down existing unserviceable socket all as specified and directed.

Supply and fixing of Modular Bell push 6A 1 module Complete including taking down existing unserviceable bell push all as specified and directed.

Supply and fixing of Modular Fan step regulator, 120W - 2 module Complete including taking down existing unserviceable regulator all as specified and directed

Supply and fixing of White cover plate with frame,1 module Complete including taking down existing unserviceable cover plate all as specified and directed

Supply and fixing of White cover plate with frame,2 module Complete including taking down existing unserviceable cover plate all as specified and directed

Supply and fixing of White cover plate with frame,3 module Complete including taking down existing unserviceable cover plate all as specified and directed.

Supply and fixing of White cover plate with frame,4 module Complete including taking down existing unserviceable cover plate all as specified and directed.

Supply and fixing of White cover plate with frame,6 module Complete including taking down existing unserviceable cover plate as specified and directed.

Supply and fixing of Modular Metal flush box 1/2 module Complete including taking down existing unserviceable metal box all as specified and directed

Supply and fixing of Modular Metal flush box 3 module Complete including taking down existing unserviceable metal box all as specified and directed

Supply and fixing of Modular Metal flush box 4 module Complete including taking down existing unserviceable metal box all as specified and directed

Supply and fixing of Modular Metal flush box 6 module Complete including taking down existing unserviceable metal box all as specified and directed

Supply and fixing of Buzzer, Ding Dong AC. 230 volts,single pole Complete including taking down existing unserviceable buzzer as specified and directed

Supply and fix Basic all purpose surface and wall mounted LED batten 20 Watt, 4 feet with aluminum housing & integrated electronic driver including pre wired and with twin core twisted flexible copper cable of suitable size Complete including taking down existing unserviceable fitting all as specified and directed.

Supply and fix Basic all purpose surface and wall mounted LED batten 10 Watt, 4 feet with aluminum housing & integrated electronic driver including pre wired and with twin core twisted flexible copper cable of suitable size Complete including taking down existing unserviceable fitting all as specified and directed.

Dismantling carefully disconnecting and bringing down the existing unserviceable flame proof tube light fittings, 1 x 40 / 36 watt / 2 x 40 / 36 W of any type from wall/ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including holders etc., and refixing to the position Complete all as specified and directed by Engineer-in-Charge. Note: Spare parts to be replaced shall be measured and paid seperatly as "supply only"

Taking down flameproof well glass fittings 70 / 125 / 250 W HPMV / HPSV / 160W MH of any type from wall/ceilings at any height for modification to bring energy conservation concept by replacement of suitable type holders and LED retrofit type bulb 30/40 watts directly connected to the system and fixing back in postion after modification complete all as specified and as directed. . Note : LED bulb 30/40 watts & holder will be measured sepaterly as "supply only"

Dismantling carefully disconnecting and bringing down the existing unserviceable tube light fittings, 1 x 40 / 36 / 28 watt / 2 x 40 / 36 / 28 W of any type from wall/ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including holders etc and refixing to the position Complete all as specified and directed by Engineer-in-Charge. Note: Spare parts to be replaced shall be measured and paid seperatly as "supply only"

Supply only LED retrofit lamp screw/pin type 30 watts Complete all as specified and directed.

Supply only LED retrofit lamp screw/pin type 40 watts Complete all as specified and directed.

Supply only Ultra bright LED Tubelight rod 20 watts with very high efficacy suited for installation in existing tubelight G13 lamp holders to give glare free light Complete all as specified and directed.

Supply only poreclain Holder suitable for 30/48 watt well glass fitting Complete all as specified and directed.

Material and labour for taking down carefully ceiling fans / wall mounted fans / pedestal fans/ exhaust fans of any sweep /size and any type from location of any height after disconnecting from the live line, including dismantling of the fan blades,motor,brackets for repairs and reassembling it complete after overhaulling oiling including greasing after replacing unserviceable parts and refixing at original location including painting with one coat of synthetic enamel paint of white colour or any approved colour after cleaning the fan surfaces and testing at site Complete all as specified and directed by Engineer-in-Charge. Notes : (i) Spare parts to be replaced except minor items will be measured and paid sepaterly as "Supply only" (ii) Painting of ceiling fans /exhaust fans will be measured sepately (iii) Rewinding of ceiling fans/exhaust fans will be measured and paid sepaterly.

Material and labour for rewinding of ceiling fans 1200 to 1400 mm sweep /wall mountedfans/pedestal fans of any size removed under Sl item No 66 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC solution to remove the burnt slots. Rewinding the same with super enameled copper winding wire of suitable gauge and size / number of turns including insulation, varnishing and reassembling completely all as specified and directed

All as per Sl item No 67 above but exhaust fan size 350 to 450 mm sweep including replacement of bushing any type /make complete all as specified and as directed.

All as per Sl item No 67 above but exhaust fan size upto 300 mm sweep including replacement of bushing any type /make complete all as specified and as directed.

Supply only Flexible copper wire of size 0.75 sq mm complete all as specified and as directed.

Supply only Ball bearing 6201/6202/6203 suitable for Ceiling fan/Exhaust fans of any sweep complete all as specified and as directed

Supply only Capacitor 2.5 mfd, 230/440 V, suitable for ceiling fan / wall fan / exhaust fan of any sweep and size complete all as specified and as directed.

Supply only Capacitor 4.0 mfd, 230/440 V, suitable for ceiling fan / wall fan / exhaust fan of any sweep and size complete all as specified and as directed

Supply only Rubber reel with MS nuts and bolts with appropriate size locking pins suitable for ceiling fan down rod of any size / dia as per requirment at site and to be fixed in position complete all as specified and as directed.

Supply only PVC canopy top or bottom complete for ceiling fans down rod suitable for any size / sweep and any make complete all as specified and as directed

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm and making good to the disturbed surfaces to match with the existing complete all as specified and directed by Engineer-in-Charge Make:- Havells Model Ventil Air DX / DX-HS White / Bajaj / Crompton

Supply and fixing round/square shape 15 watt 220 volts AC recessed/ surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down existing unserviceable fitting all as specified and as directed.

Taking down the existing unserviceable wall mounted fan of any sweep deposited to MES store and supply and fixing wall mounted fan 400 mm sweep ,1350 RPM ,75 CFM suitable for operation on AC 220/230 volts single phase ,50 hz supply oscillating type complete including necessary grouting of bolts etc ,complete all as specified and as directed

Taking down the existing unserviceable exhaust fan of any sweep deposited to MES store and Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300mm sweep with, blades, and frame and louver complete all as specified and directed by Engineer-in-Charge aj

Taking down the existing unserviceable FLP exhaust fan of any sweep deposited to MES store and Supply and fix FLP Exhaust fan of size 380 mm (15") with louvers single phase 240 volt , 0.25 HP complete all as specified and as directed. Make:- Shyaam Switchgear Cat Part No SSPL/MT/140 / Flexpro / Baliga

Taking down the existing unserviceable ceiling fan of any sweep deposited to MES store and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including taking down existing unserviceable fitting all as specified and as directed

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including taking down existing unserviceable fitting all as specified and as directed

Supply, fixing, connecting and testing MCB SP 6 to 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply, fixing, connecting and testing MCB SPN 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply, fixing, connecting and testing MCB SPN 40 to 63 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply, fixing, connecting and testing MCB TP 25 to 63 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply, fixing, connecting and testing MCB TPN 16 to 32 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply, fixing, connecting and testing MCB TPN 40 to 100 amps 10 kA C curve on existing distribution board any type and connecting to existing circuits complete including taking down existing unserviceable MCB all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed / surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down existing unserviceable fitting all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed / surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down existing unserviceable fitting all as specified and as directed.

Supply & fixing Recess mounted downlighter 24 Watt with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integral electronic low THD (<10%) LED driver complete including taking down existing fitting.

Supply & fixing environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire 10 W comprising of high brightness LEDs at any height complete including taking down existing unserviceable fitting all as specified and as directed.

Supply and fixing Load line distribution Board, TPN vertical, 8 way double door type , fixed on wall semi flush , with out incoming MCCB, bus-bars, Neutral link, blanking plates complete including cutting chases as per suitable DB size for proper fixing complete including taking down existing unserviceable DB all as specified and as directed as required Note: MCBs/MCCB shall be measured and paid for separately under relevant items.

Supply and fixing in replacement of MCCB 63 amps 16 KA capacity 4 pole at 415 Votls AC 50 Hz adjustable thermal and fixed magnetic, conforming to IS- 60947-2 including suitable arrangement to existing LT panel for proper seating/oepration complete all as specified and as directed.

Supply and fixing in replacement of MCCB 100 amps 16 KA capacity 4 pole at 415 Votls AC 50 Hz adjustable thermal and fixed magnetic, conforming to IS- 60947-2 including suitable arrangement to existing LT panel for proper seating/opration complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing Suitable shape street light fitting bracket made out of GI Pipe 40 mm dia med grade or of suitable size as per requirement and shape, 02 nos of clamps made out from MS flat of size 40 mm x 6 mm with nuts and bolts (length of pipe should not be less than 1.5 m ) duly painting the flat iron and nut botls with primer and finish coar complete including taking down unserviceable bracket all as specified and directed by Engr-in-charge.

Supply and fixing Next generation, energy saving, environment friendly & robust highbay LED 200W with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W with necessary connection and brackets of suitable size complete including taking down unserviceable fitting all as specified and as directed. Note:- Light Fittings and fans to be fitted at a height upto 20 mtrs.The contractor shall be provide T&P, ladder, safety belt on his own arrangment with safety precautions.

Supply and fixing 8 way SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete including cutting chases as per suitable DB size for proper fixing required at site with all accessories including taking down unserviceable DB all as directed by Engineer-in-Charge

Supply and fixing 12 way SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete including cutting chases as per suitable DB size for proper fixing required at site with all accessories including taking down unserviceable DB all as directed by Engineer-in-Charge

Supply and fix MCCB 3 Pole, 415 V, Adjustable thermal release type, 250 Amps with breaking capacity 36 KA in existing LT panel / in sheet metal enclosure complete including taking down existing unserviceable MCCB all as specified and as directed.

Dismantling/Taking out LT cable PVC insulated PVC sheathed and armoured with multistranded aluminium conductor heavy duty 1100 V grade laid in ducts/ on wall/poles /inside protection pipe of the size upto 185 sqmm 3.5 core complete all as specified and as directed.

Re-laying/laying only existing serviceable cable of LT under ground cable, PVC insulated, PVC sheathed and armoured with multistranded aluminium conductor, heavy duty 1100 Volts grade, fixed on wall/poles or laid in ducts /inside protection pipe of the sizes upto 185 sqmm 3.5 core including cable glands, lugs and suitable sizes of MS saddle, clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and as directed. Note:- The cable retrived from site will be used after testing ,jointing for re-laying and connecting to new DB all as per directed by Engr-in-charge.

Supply and fix PVC FRLS Armoured Copper cable of 1.5 sqmmx 3 core including saddling on wall / surface at any height complete including taking down unserviceable cable all as specified and as directed.

Supply and fix PVC FRLS Armoured Copper cable of 4 sqmmx 4 core including saddling on wall / surface at any height complete including taking down unserviceable cableall as specified and as directed.

Supply and fix PVC FRLS Armoured Copper cable of 2.5 sqmmx 3 core including saddling on wall / surface at any height complete including taking down unserviceable cable all as specified and as directed.

Supply and fix PVC FRLS Armoured Copper cable of 10 sqmmx 4 core including saddling on wall / surface at any height complete including taking down unserviceable cable all as specified and as directed.

Material and labour for special factory made earthing electrode comprising of hot dipped galvanized steel pipe in pipe electrode , outer pipe 76 mm dia medium grade and inner pipe 32 mm dia including testing 3 metre long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm dia holes for nut bolt buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 metre deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with miniumum two nos of GI nut, bolts and connected to test point from earthing pit. The electrode pipes should be filled with 2 x 25 kg bags of carbon based earthing compound. The compound shall be highly conductive , hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with pH value between 7-9 connected to the earthing test point, fibre reinforced plastic pit not less 300 x300 mm with pit cover, including necessary reurning , filling and removal of extra soil. Make : U-PROTEC EARTHING PVT. LTD / Fast Electrode / True Power complete all as specified and as directed. Note:-(i) GI strip beyond 7.5 metre will be measured and paid separately. (ii) Resistance of earthing should not more than 2 Ohm. Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG user . Test results are to be written in letters of 20 mm height in white colour on black paint back ground . If the desired result not obtained after testing, the contractor should do improve the earthing resistance by pouring the earthing compound without any extra cost to Govt.

Dismantling carefully, disconnecting and removing all doors of the existing flameproof DB of any size/capacity and removing burn out parts like MCCB / MCB / Copper lugs and connectors etc, carrying out necessary repairs and providing internal wiring with suitable size of copper wire,lugs and connectors etc., painting and refixing in position/same location complete all as specified and directed by Enge-in-Charge. Note:- The items are deemed include in quoted rate as per site requirement.

Dismantling carefully, disconnecting and bringing down the existing flameproof switch socket of 16-25 Amp, Single phase of any make, replacing burn out parts of plug and socket, MCB, earth wire and lugs without any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 16-32 Amp. Three phase of any make, replacing burn out parts like switch, socket, copper wire, lugs etc., without any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge.

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 63 Amp. Three phase of any make ,replacing burn out parts without at any extra cost and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge

Material and labour for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 20mm dia GI pipe light grade for earth lead upto 7.50 m long complete all as specified and directed by Engineer-in-Charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60 × 60× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr-in charge .

Supply and fix FLP junction box 4 way 100 mm dia complete all as specified and directed by Engr-in-charge. Make:- Shyam Switchgear Cat no SSPL/JB/105 or in Baliga/ Flexpro

Supply and fix FLP double compression gland of suitable size of 18 mm dia complete all as specified and directed by Engr-in-charge

Supply and fix FLP double compression gland of suitable size of 23 mm dia complete all as specified and directed by Engr-in-charge

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete including taking down unserviceable plug and socket all as specified and directed by Engineer-in-charge.

Supply and fixing triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 63 amps 415 volts complete including taking down unserviceable plug and socket all as specified and directed by Engineer-in-charge.

Supply and fixing of flameproof switch socket combination suitable for 4P+E 32 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete including taking down unserviceable socket all as specified and as directed by Engineer-in-charge. Make:- Shyaam Switchgear Cat no SSPL/2C/1010 / Flexpro / Baliga

Supply and fixing of flameproof switch socket combination suitable for 4P+E 63 Amps, TPN, 415 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete including taking down unserviceable socket all as specified and as directed by Engineer-in-charge Make:- Shyaam Switchgear Cat no SSPL/MCDB/186 / Flexpro / Baliga

Supply, fixing & testing of new sheet metal enclosure distribution board SPN 4 way double door type including making good to the diturbed surface complete all as specified and as directed. Note:- All incoming / outgoing MCBs shall be measured and paid under appropriate item here-in after

Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Material and labour earth contunity conductor or main earthing lead fixed to wall on recessed or burried in ground or drawn in conduit/pipe fixed to poles or any other indicated situation for loop earthing as required 32x6 mm size galvanised strip complete all as specified and as directed.

Supply and fix operating handle of size 20 to 25 mm in existing flameproof panel suitable for operating On OFF for MCB of capacity 6 A to 40 A etc as required at site complete all as specified and directed.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. Make: JETAIRISFL120WLED757ARWBLTG of Havells or equivalent in Philips/ Wipro/ Crompton

Supply and fixing in repairs Flame proof weather proof elbow 3/4" complete all as specified and as directed.

Supply and fixing in repairs Flame proof weather proof elbow 1" complete all as specified and as directed

Supply and fixing in repairs FLP junction boxes LM-6 with plain cover 3 Way suitable for 80 mm dia 3/4" ET size complete all as specified and as directed.

Supply and fixing in repairs FLP junction boxes LM-6 with plain cover 4 Way suitable for 80 mm dia 3/4" ET size complete all as specified and as directed.

MAYUR ELECTRIC SERVICES (BID ID -3090264)

cooltech engineering services (BID ID -3089862)

Shree Ayyappa Engineering (BID ID -3089309)

SKS Electricals (BID ID -3089068)

GANGA ENTERPRISES (BID ID -3090070)

Borole Electricals (BID ID -3085326)

YOGESH ELECTRICALS (BID ID -3085395)