Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹51.6 L+₹14.2 L (38.0%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹53.9 L+₹16.5 L (44.3%)Admitted-Finance WZ 100 5 TITAR PUR TAGORE GARDEN NEW DELHI 110027 | NEW DELHI | WEST DELHI | DELHI | 110027 | L3 | Admitted-Finance | |
| 4 | L4₹56.5 L+₹19.1 L (51.2%)Admitted-Finance A 3 257 2ND FLOOR JANAKPURI ASALATPUR ROAD JANAKPURI WEST DELHI DELHI 110058 UDYAM DL 11 0007281 | WEST DELHI | DELHI | 110058 | L4 | Admitted-Finance | |
| 5 | Rejected-Technical | - | Rejected-Technical Documents have not been uploaded as per NIT Note 1 and 2 |
| Sl No | Description | Qty | Unit | ASHOKA FURNITURES L3 | Capital Construction Company L4 | M/s Makhan Lal L1 | M/s Rajesh Kumar Jain L2 |
|---|---|---|---|---|---|---|---|
| 1.00BOQ PART - I (STEEL FURNITURE) | |||||||
| 1.01 | Almirah Large Steel with shelves:-
(a) The overall size shall be of 910x490x1900mm made of MS sheet.
(b) The body, legs & shelves shall be made of 1mm nominal thick MS sheet and back also be 1mm nominal thick MS sheet irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend.
(d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be provided with duplicate keys.
(f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Finish: All MS/CRCA members shall be Pre -treated with epoxy polyester powder coating (Black) 70 microns by 7 tank process and Oven Dried internally & externally with the following specification :-
(i) Dry film thickness more than 45 microns.
(ii) Salt spray test to with stand more than 1000 hours.
(iii) Adhesion as per DIN 53152 standards.
(iv) Pencil scratch hardness more than 2H.
(h) Rest all as per drg or as specified. | 39 | Each | 12,190 ₹4,75,410 | 13,809 ₹5,38,551 | 11,500 ₹4,48,500 Lowest | 15,000 ₹5,85,000 |
| 1.02 | Almirah Large Steel 1/2h to 1/2S :-
(a) The overall size shall be of 910x490x1900mm. (b) The body, legs, shelves and back shall be made of 1mm thick MS sheet, irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be make-Godrej or equivalent approved make with duplicate keys. (f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Rest all as per drg. | 22 | Each | 13,090 ₹2,87,980 | 13,909 ₹3,05,998 | 11,000 ₹2,42,000 Lowest | 11,000 ₹2,42,000 Lowest |
| 1.03 | Almirah Med Steel :-
(a) The overall size shall be of 760x440x1270mm. (b) The body, legs, shelves and back shall be made of 1mm thick MS sheet, irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be make-Godrej or equivalent approved make with duplicate keys. (f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Rest all as per drg. | 35 | Each | 7,006 ₹2,45,210 | 8,009 ₹2,80,315 | 6,500 ₹2,27,500 Lowest | 7,500 ₹2,62,500 |
| 2.00BOQ PART - II (WOODEN FURNITURE) | |||||||
| 2.01 | Bed Hard MAP :-
(a) The overall size shall be of 2050x900 on plan with foot rest height of 500 & head rest of height 800mm.
(b) The framework shall be made of CRCA box sections as under :-
(i) Long brails - 25x65mm box section of 16 gauge.
(ii) Short rails - 25x65mm box section of 16 gauge.
(iii) Frame work for foot board & head board- 18x18mm box section of
16 gauge.
(iv) Stiffeners- 4 nos each of 25x25mm box section of 16 gauge irrespective of
what shown in fig.
(c) The bed top shall be of 12mm thick BWR grade plywood conforming to IS-303.
(d) The main framework for foot board & head board along with legs shall be made out of CRCA box section of 38x38mm with 16 G thick.
(e) The foot board & head board shall be covered with 18 mm thick pre-laminated particle board of BWR Grade conforming to IS-12823.
(f) Rest all as per drg. | 49 | Each | 4,900 ₹2,40,100 | 5,509 ₹2,69,941 | 4,500 ₹2,20,500 Lowest | 5,500 ₹2,69,500 |
| 2.02 | Book Case :-
(a) Overall size shall be 1200mm long, 300mm wide and 760mm high.
(b) All wood shall be first class hard wood.
(c) Legs shall be 45mmx45mm up to 40mm from top of the legs and 25mmx25mm in section at bottom legs. The legs shall be 100mm high fixed together with with 25mmx40mm in section teak wood rails in short and long sides.
(d) The top body of book case shall be fixed over the frame from the bottom of rail with screw.
(e) The body of book case shall project on longer side up to 150mm from the centre of side rails and project upto 50mm from centre of long rails in short direction.
(f) Top,Bottom, sides and vertical partition shall be 18/19mm thick MDF board.
(g) Rest all as per drg and as sprcified. | 43 | Each | 3,550 ₹1,52,650 | 7,309 ₹3,14,287 | 3,000 ₹1,29,000 Lowest | 4,000 ₹1,72,000 |
| 2.03 | Bin Soiled Linen Multipurpose :-
(a) The overall size of unit shall be of 1200x450x750mm.
(b) The body, shelves and drawers shall be made of 18mm thick MDF board and back shall be of 12mm thick BWR grade plywood conforming to IS-303.
(c) 75mm high skirting at bottom of the unit shall be made of 19mm thick teakwood , connected by 25x25mm teak wood stiffeners.
(d) The shutters shall be provided with 6mm thick teak beading.
(e) The handle shall be 100mm long and made of brass.
(f) The wood work shall be French polished.
(g) Rest all as per drg. | 9 | Each | 7,600 ₹68,400 | 7,809 ₹70,281 | 4,500 ₹40,500 Lowest | 10,000 ₹90,000 |
| 2.04 | Chair Dining Cushioned :-
(a) Timber shall be first class teakwood free from knots and cracks shall be used with moisture content permissible as per IS-28:1973.
(b) The removable seat shall be made out of 75mm thick urethane foam with 40 density pasted with adhesive on 12mm thick BWR Grade plywood (as per IS-303) covered with superior quality tapestry cloth of approved coloured and shade.
(c) PVC rings to be screwed to all four legs.
(d) All wooden portions shall be smoothened to apply best quality of French polish till attaining glossy finish.
(e) All wooden joints shall be fixed with bamboo pins and nails shall not be used.
(f) Rest all as per drg or as specified. | 105 | Each | 2,191 ₹2,30,055 | 2,609 ₹2,73,945 | 1,999 ₹2,09,895 Lowest | 2,800 ₹2,94,000 |
| 2.05 | Chair Computer :-
(a) The seat and back shall be made up of 12mm thick hot pressed plywood upholstered with acrylic fabric of approved shade and moulded polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The seat size shall be of 510x470x60mm.
(b) The polyurethane foam shall be of machine moulded with density= 45= 2kg/m3 and hardness= 20= 2 kg on Hampden machine at 25% compression.
(c) SEAT/BACK COVERS: The seat and back covers shall be vacuum formed from 3 mm thick black ABS sheets.
(d) ARMRESTS (FIXED): The one-piece armrests shall be made of black integral skin polyurethane reinforced with MS insert with 50-70 shore ‘A’ hardness. The armrests shall be fitted to the seats with powder-coated armrests brackets made of 5mm thick HR steel
(e) The adjustable tilting mechanism shall be designed with the following features :-
(i) 360 revolving type mechanism to allow fluid lateral movement.
(ii) Forward tilt, Self-regulating tilt tension+ Manual override.
(iii) 4 position tilt locking with anti-shock back mechanism which prevents the
back rest from impacting the user when the lock is released.
(iv) Provision for fitting Drop-lift mechanism.
(f) The backrest shall consist of a Drop-lift mechanism which can be adjusted in the range of 70mm and can be locked in 7 positions for better lumbar support.
(g) The pneumatic height adjustment shall have maintenance free & has an adjustment stroke of 100mm
(h) The TELESCOPIC BELOW ASSEMBLY: The below shall be of 3 piece telescopic type and injection moulded in black polypropylene
(j) The pedestal shall be of injection moulded in black 30% glass filled nylon and fitted with 5 nos twin wheel castor. The pedestal is 600mm pitch centre dia (700 mm with castors) A 10.5 mm dia forged bright zinc plated caster pin is of press-fitted into each prong for holding the castors.
(j) The twin wheel casters shall be of injection moulded in black Nylon of trouble free movement
(k) Rest all as per drg and general engineering practice | 59 | Each | 4,900 ₹2,89,100 | 5,109 ₹3,01,431 | 3,200 ₹1,88,800 Lowest | 7,000 ₹4,13,000 |
Tender Value
₹46.3 L
EMD Value
₹92,580
Closing Date
1 Jun 2026, 6:00 pmClosed
CWE (AF) Palam
CWE (AF) Palam, DELHI CANTT-10
RENEWAL/REPLACEMENT OF BER FURNITURE ITEMS AT CAMERO COMPLEX UNDER GE (AF) SUBROTO PARK, DELHI CANTT-10
2026_MES_748627_2
CWE/PM/SP-28/2025-26
Open Tender
Miscellaneous Works
Item Rate
90 days
Subroto Park
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) Subroto Park
₹92,580
Yes
6 Jul 2026
7 May 2026
8 Jun 2026
7 May 2026
1 Jun 2026
18 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BOQ PART - I (STEEL FURNITURE) | |||||
| 1.01 | Almirah Large Steel with shelves:-
(a) The overall size shall be of 910x490x1900mm made of MS sheet.
(b) The body, legs & shelves shall be made of 1mm nominal thick MS sheet and back also be 1mm nominal thick MS sheet irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend.
(d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be provided with duplicate keys.
(f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Finish: All MS/CRCA members shall be Pre -treated with epoxy polyester powder coating (Black) 70 microns by 7 tank process and Oven Dried internally & externally with the following specification :-
(i) Dry film thickness more than 45 microns.
(ii) Salt spray test to with stand more than 1000 hours.
(iii) Adhesion as per DIN 53152 standards.
(iv) Pencil scratch hardness more than 2H.
(h) Rest all as per drg or as specified. | 39 | Each | - | - |
| 1.02 | Almirah Large Steel 1/2h to 1/2S :-
(a) The overall size shall be of 910x490x1900mm. (b) The body, legs, shelves and back shall be made of 1mm thick MS sheet, irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be make-Godrej or equivalent approved make with duplicate keys. (f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Rest all as per drg. | 22 | Each | - | - |
| 1.03 | Almirah Med Steel :-
(a) The overall size shall be of 760x440x1270mm. (b) The body, legs, shelves and back shall be made of 1mm thick MS sheet, irrespective of whatever shown on drg.
(c) Welding process shall be of MIG (Metal Inert Gas) type using Carbon dioxide and Argon blend. (d) MS sheet shall be painted internally and externally with two coat of approved shade of synthetic enamel paint over a coat of red oxide primer.
(e) Locking arrangements shall be make-Godrej or equivalent approved make with duplicate keys. (f) Handles shall be of non - ferrous metal alloy with chrome plated and lock shall be make-Godrej or equivalent approved make.
(g) Rest all as per drg. | 35 | Each | - | - |
| 2BOQ PART - II (WOODEN FURNITURE) | |||||
| 2.01 | Bed Hard MAP :-
(a) The overall size shall be of 2050x900 on plan with foot rest height of 500 & head rest of height 800mm.
(b) The framework shall be made of CRCA box sections as under :-
(i) Long brails - 25x65mm box section of 16 gauge.
(ii) Short rails - 25x65mm box section of 16 gauge.
(iii) Frame work for foot board & head board- 18x18mm box section of
16 gauge.
(iv) Stiffeners- 4 nos each of 25x25mm box section of 16 gauge irrespective of
what shown in fig.
(c) The bed top shall be of 12mm thick BWR grade plywood conforming to IS-303.
(d) The main framework for foot board & head board along with legs shall be made out of CRCA box section of 38x38mm with 16 G thick.
(e) The foot board & head board shall be covered with 18 mm thick pre-laminated particle board of BWR Grade conforming to IS-12823.
(f) Rest all as per drg. | 49 | Each | - | - |
| 2.02 | Book Case :-
(a) Overall size shall be 1200mm long, 300mm wide and 760mm high.
(b) All wood shall be first class hard wood.
(c) Legs shall be 45mmx45mm up to 40mm from top of the legs and 25mmx25mm in section at bottom legs. The legs shall be 100mm high fixed together with with 25mmx40mm in section teak wood rails in short and long sides.
(d) The top body of book case shall be fixed over the frame from the bottom of rail with screw.
(e) The body of book case shall project on longer side up to 150mm from the centre of side rails and project upto 50mm from centre of long rails in short direction.
(f) Top,Bottom, sides and vertical partition shall be 18/19mm thick MDF board.
(g) Rest all as per drg and as sprcified. | 43 | Each | - | - |
| 2.03 | Bin Soiled Linen Multipurpose :-
(a) The overall size of unit shall be of 1200x450x750mm.
(b) The body, shelves and drawers shall be made of 18mm thick MDF board and back shall be of 12mm thick BWR grade plywood conforming to IS-303.
(c) 75mm high skirting at bottom of the unit shall be made of 19mm thick teakwood , connected by 25x25mm teak wood stiffeners.
(d) The shutters shall be provided with 6mm thick teak beading.
(e) The handle shall be 100mm long and made of brass.
(f) The wood work shall be French polished.
(g) Rest all as per drg. | 9 | Each | - | - |
| 2.04 | Chair Dining Cushioned :-
(a) Timber shall be first class teakwood free from knots and cracks shall be used with moisture content permissible as per IS-28:1973.
(b) The removable seat shall be made out of 75mm thick urethane foam with 40 density pasted with adhesive on 12mm thick BWR Grade plywood (as per IS-303) covered with superior quality tapestry cloth of approved coloured and shade.
(c) PVC rings to be screwed to all four legs.
(d) All wooden portions shall be smoothened to apply best quality of French polish till attaining glossy finish.
(e) All wooden joints shall be fixed with bamboo pins and nails shall not be used.
(f) Rest all as per drg or as specified. | 105 | Each | - | - |
| 2.05 | Chair Computer :-
(a) The seat and back shall be made up of 12mm thick hot pressed plywood upholstered with acrylic fabric of approved shade and moulded polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The seat size shall be of 510x470x60mm.
(b) The polyurethane foam shall be of machine moulded with density= 45= 2kg/m3 and hardness= 20= 2 kg on Hampden machine at 25% compression.
(c) SEAT/BACK COVERS: The seat and back covers shall be vacuum formed from 3 mm thick black ABS sheets.
(d) ARMRESTS (FIXED): The one-piece armrests shall be made of black integral skin polyurethane reinforced with MS insert with 50-70 shore ‘A’ hardness. The armrests shall be fitted to the seats with powder-coated armrests brackets made of 5mm thick HR steel
(e) The adjustable tilting mechanism shall be designed with the following features :-
(i) 360 revolving type mechanism to allow fluid lateral movement.
(ii) Forward tilt, Self-regulating tilt tension+ Manual override.
(iii) 4 position tilt locking with anti-shock back mechanism which prevents the
back rest from impacting the user when the lock is released.
(iv) Provision for fitting Drop-lift mechanism.
(f) The backrest shall consist of a Drop-lift mechanism which can be adjusted in the range of 70mm and can be locked in 7 positions for better lumbar support.
(g) The pneumatic height adjustment shall have maintenance free & has an adjustment stroke of 100mm
(h) The TELESCOPIC BELOW ASSEMBLY: The below shall be of 3 piece telescopic type and injection moulded in black polypropylene
(j) The pedestal shall be of injection moulded in black 30% glass filled nylon and fitted with 5 nos twin wheel castor. The pedestal is 600mm pitch centre dia (700 mm with castors) A 10.5 mm dia forged bright zinc plated caster pin is of press-fitted into each prong for holding the castors.
(j) The twin wheel casters shall be of injection moulded in black Nylon of trouble free movement
(k) Rest all as per drg and general engineering practice | 59 | Each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
BOQ_855729.xls
BOQ • 0.32 MB
Tender28.pdf
Tender Documents • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .