Repair/ replacement / maintenance of street/ security/ perimeter/ high mast lights and allied works at Mil Stn Beas under GE Kapurthala

Attending of day to day complaints received through telephone or in person for maintenance of street lights/security lights/Gate lights/Post top lantern/High mast lights fixed at upto 16 mtr height of any make and rectification of defects installed on street light poles 9/11 mtr long, building walls, roof by bringing down the fittings on ground or in position including replacement of UNSV parts, Driver, flexible wire, reflector etc including cleaning of glass/acrylic cover for clear reflection of light, replacement of old unserviceable street light fittings with new fittings etc as required to make the light fitting functional. The Contractor shall be resposible for providing Vehicle, ladder, tools as required at site for repair/for making light fittings functional at his own cost and arrangement. Note : (i) Light fitting, cable, flexible wire and LED drive if required to be replaced in repair shall be measured and paid separetely under relevant item of this BOQ for supply and fixing in replacement. (ii) Contractor's manpower/ technician should be available from 09:00 AM to 17:00 PM daily to receive complaints from complaint cell at 9.00 AM and rectify the complaints on the same day and records to be maintained in Register by Rep of Contractor and staff of AGE E/M Sub divn (iii) Old retrived material shall be deposited in AGE E/M yard and will be given to contractor as credit after completion of contract. (iv) Repair/ rectification of one street light complaints will be treated as one complaints. (v) Rectification/Restoring street lights in series due to cable fault (Under ground or Overhead) will be treated as one complaints only. Note: Recovery @ Rs 1000/- per day for not attending complaints/ absense of technician for the entire day From 09:00 AM to 17:00 PM will be charged after intimation by rep of E/M subdivision through telephonic/digital/ or written complaints. On an average 12-15 Complaints per day to be attended by the employed staff.

Taking down old unserviceable fitting and S&F Energy saving LED street light fitting 35 Watt, 230 V AC outdoor type, with PDC Aluminium body and toughened glass visor fitted in frame, separately driver compartment provided, secondary optical lens for superior light distribution efficiency >105Lm/W, CCT 5700K, IP66, input voltage from 120-270 V power factor above 0.95 complete with driver, lamp, suitable for 40/50 mm dia bracket with impact resistant complete all as specified and directed by Engineer-in-Charge. (Note : Fixing of new street lights will included any nipple or other fixtures required to fix the new lights on the existing brackets at no extra cost).

Complete all as per item no 2 above but for 60 watt

Complete all as per item no 2 above but for 70 watt

Taking down old unserviceable fitting and supply and fixing LED flood light 70 watt 230 V AC outdoor type, not less than 105 lumens/Watt , toughned glass with high pressure die cast aluminum hosing, thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engineer-in-Charge. (Note : Fixing of new street lights will included any nipple or other fixtures required to fix the new lights on the existing brackets at no extra cost).

Complete all as per item no 5 above but for 100 watt

Complete all as per item no 5 above but for 170 watt

supply and fixing decorative LED post top lantern 20 watt powder coated aluminium die cast and spun aluminium body with clear/opel diffuser suitable for Landscape lighting available in 5700K CCT IP65 input voltage from 120-270 V power factor above 0.95 complete fitting including PCC platform MS column pipe 1.50 Mtr length, all accessories all as specified and directed by Engineer-in-Charge. (Note : Fixing of new street lights will included any nipple or other fixtures required to fix the new lights on the existing brackets at no extra cost).

Taking down old unsv garden light and supply and fixing LED decorative Bollard garden lights suitable for 10 Watt IP65 10 watt in inverted pyramid tropod type LED Bollard with soft 360 light, resistant to corrosion with better optic for uniform distribution complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in-Charge.

M&L for octagonal poles hot dip galvanized steel (IS 5986 Gr. Fe 510) Octagonal pole 7.0 mtr long, top top die 70 mm botom dia 130 mm having thickness 3 mm having door operating of size 500 mm above ground level with CI Base plate of size 240x240x16mm having PCD 220 mm foundation J bolts M20 x 70 mm (530 + 130 of J) nuts and screwes and having hot dip galvanized double plain arm bracket 1000 mm overhang on both side or 45o with 48.3 mm outer dia pipe of thickness 3.2 mm fixed on top with bolts and necessary earth work RCC with steel reinforcemet work for the foundation of pole, including necessary form work and fare finish to exposed surfaces without using extra cement etc; complete all as specified and as directed.