Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC | L1 | Accepted-AOC Work Order Issued |
Tender Value
₹4.3 L
EMD Value
₹8,690
Closing Date
1 Dec 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Urgent Improvements to water supply system in Francethippa water works campus in Yanam
2022_PWDC2_11465_1
68/EEY/2022-23
Open Tender
Civil Works
Item Rate
60 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹8,690
5 Jan 2023
25 Nov 2022
2 Dec 2022
25 Nov 2022
1 Dec 2022
25 Nov 2022
Amount
2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, with in a lead of 50 m - all kinds of soil - pipes, cables etc, exceeding 80mm dia but not exceeding 300 mm dia.
2.27 Supplying and filling in plinth with river sand under floors, including watering,ramming consolidating and dressing complete.
4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
13.6.1 20mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)
15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:4:8 or leaner mix (including equivalent design mix).
15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar.
15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm.
15.43.1 Dismantling manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - water bound macadam road.
15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
18.18.2 Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore.
18.46.2 Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 20 mm nominal bore.
31.47.4 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete -150mm diameter pipe.
31.47.5 Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 200mm diameter pipe.
31.48.3B Providing and fixing C.I. sluice valve (PN 1.6) (with cap) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 100 mm dia.
31.48.6A Providing and fixing C.I. Double air valve with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 40 mm dia.
31.53.2 Constructing masonry Chamber 120x 120x 100cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter 160mm bottom diameter and 180mm deep (inside) with chained lid and R.C.C top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design - with bricks class designation 35.
31.128.1D Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) 200mm dia.
31.130.1A Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.
31.136.1B Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including GI specials such as bends,tees, elbow, coupling,reducer etc., complete all as per IS and CPWD specification. -20mm dia
31.136.1E Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including GI specials such as bends, tees, elbow, coupling, reducer etc., complete all as per IS and CPWD specification. -40mm dia.
31.136.1K Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including GI specials such as bends, tees, elbow, coupling, reducer etc.,complete all as per IS and CPWD specification. -150mm dia.
31.141.1A Providing and fixing in position G.I. elbow (UNIQUE/ R Brand/ HB Brand/ UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 20 mm dia.
31.141.1D Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 40 mm dia.
31.153.1A Providing and fixing mild steel flange including bolts, nuts,rubber insertion, labour charges etc, complete-40mm dia.
31.153.1E Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-100mm dia
31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete-150mm dia.
31.161.1F Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI markedincluding transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.
31.161.1G Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked includingtransportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 140mm dia.
31.161.1H Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI markedincluding transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 160mm dia.
31.167.1M Providing and fixing in position UPVC moulded reducer coupler (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 160 x 140mm dia.
31.172.1D Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110mm dia
31.172.1F Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 160mm dia
31.172.1H Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 200mm dia
31.173.1C Providing and fixing in position UPVC moulded saddle set (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 90 x 20mm dia
31.178.1D Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 110 mm dia
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .