REPAIR REPLACEMENT OF FLOOR AND WALL TILING WOODEN AND ALUMINIUM JOINERY PLUMBING MISC B AND R WORKS INCLUDING PERIODICAL SERVICES AND SEWAGE CLEANING MAINT OF SEWAGE SYSTEM AT IHQ MOD ARMY CAMP UNDER AGE B AND R I SOUTH OF GE SOUTH DELHI CANTT 10

Amount

Attending complaint for repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description, any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tightening the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required, Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc complete all as specified and directed by Engineer-in-charge Notes 1:- This item is applicable only where no store is required. 1. The site for attending complaints is IHQ MoD (Army) Camp. Contractor shall provide minimum one tradesmen (plumber) for site to attend the complaint in all working days between 0830Hrs to 1700Hrs including holiday and sunday. 2. Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the team of plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 4. A recovery of Rs. 500/- for not attending the complaint upto 04 hours and after 04 hours Rs. 1000/- shall be recovered from the contractor due. 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each RAR/Bill. 7.The above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as S&F here-in-after.

Supply only in repairs brass jumper washer, brass head, face and spindle for bib cock/ pillar cock/ stop cock 15 mm bore any type complete all as specified and directed by Engineer-in-charge

S&F in repairs chromium plated bib tap, long body with flange, cast copper alloy fancy type, screwed for 15mm bore iron pipe complete all as specified and directed by Engineer-in-charge

S&F in repairs PTMT bib tap standard, (Minimum weight 90 gms) any colour, fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge

S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge

S&F in repairs pillar cock 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge

S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos check nuts with washer complete all as specified and directed by Engineer-in-charge

All same as per Ser Item No. 07 above but 600mm long

S&F in repairs chromium plated Stop valve/angle valves cast copper alloy, complete all as specified and directed by Engineer-in-charge

S&F in repairs chromium plated brass overhead shower rose 75mm dia with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed by Engineer-in-charge

S&F in repairs 32 mm dia PVC waste pipe for WHB 80 cm long with union complete all as specified and directed by Engineer-in-charge

S&F in repairs PVC waste pipe of standard pattern, not less than 115 cm long, 40mm dia for steel sink waste coupling of suitable size complete all as specified and directed by Engineer-in-charge

S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed by Engineer-in-charge

S&F in repairs waste fittings brass chromium plated 40 mm to 50 mm dia for stainless steel sink complete all as specified and directed by Engineer-in-charge

S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length up to 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed by Engineer-in-charge

S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length up to 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed by Engineer-in-charge

S&F in repairs small fittings compression type Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipe such as socket, elbow, Tee, union, reducer etc for 16 mm bore pipe (ISI marked) complete all as specified and directed by Engineer-in-charge

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and directed by Engineer-in-charge

S&F in repair counter sunk vitreous china coloured wash hand basin oval shape of size 560x430mm complete (first quality) complete all as specified and directed by Engineer-in-charge

S&F in replacement PVC Polyplast float valve for cistern tank complete all as specified and directed by Engineer-in-charge

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed by Engineer-in-charge

S&F in repairs brass chromium plated health faucet for WC with 1.20 Mtr long CP flexible pipe complete all as specified and directed by Engineer-in-charge

S&F in repairs chromium plated brass two in one bib taps fancy type suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-charge

S&F in repairs, brass CP towel rail 60Cm long complete all as specified and directed by Engineer-in-charge

S&F in repair, central hole wash hand basin CP brass mixer, screwed down for 15mm bore iron pipe complete all as specified and directed by Engineer-in-charge

S&F in repair 15 mm bore galvanised steel water tubing 'medium grade' with and including all fittings and fixed to walls or laid in floors including raking down old u/s pipe complete all as specified and directed by Engineer-in-charge

S&F 20 mm bore galvanised steel water tubing 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed by Engineer-in-charge

S&F in repair white, vitreous china wash hand basin, flat back, size 550x400 mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-charge

S&F in repairs vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete all as specified and directed by Engineer-in-charge

S&F in repair, white, vitreous china ware, wash down water closet, pedestal pattern (EWC), excluding fixing bolts but including jointing to flushing cistern and flush pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge

S&F in replacement 500 litres capacity rotational moulded polyethylene water storage tank 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position icluding complete all as specified and directed by Engineer-in-charge

S&F in replacement 1000 litres capacity rotational moulded polyethylene water storage tank 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed by Engineer-in-charge

S&F in replacement 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge

S&F PVC (SWR) bends any radius for 110mm bore PVC pipe complete all as specified and directed by Engineer-in-charge

S&F HDPE PVC lid (cover) for 500 to 1000 Litres capacity PVC tanks, in repairs complete all as specified and as directed.

Taking down cast iron pipes including fittings , dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

M&L in repairs 75 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge

M&L in repairs 100 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge

S&F in repairs PVC(SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed by Engineer-in-charge

S&F PVC (SWR) bends any radius, with threaded type door eye of 75mm bore size complete all as specified and directed by Engineer-in-charge

S&F in repairs MS powder coated sliding door bolts 250 mm long clip type less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed by Engineer-in-charge

S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge

S&F in repairs 150 mm aluminium anodised handle cast type, complete all as specified and directed by Engineer-in-charge

S&F in repairs 100 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-charge

S&F in repair two legged aluminium floor door stopper with rubber shoe , complete all as specified and directed by Engineer-in-charge

S&F in replacement 19 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge

S&F in repair IInd class soft wood (Area not exc. 3 Square cm ) Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads etc. complete all as specified and directed by Engineer-in-charge

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane incl taking down old broken glass complete all as specified and directed by Engineer-in-charge

S&F 5.5mm thick tinted glass, plain ordinary quality, exceeding 0.5 Sqm in each pane, including hacking out old broken glass of any thickness/size or quality from wooden/metal frame, fixed with rubber packing and aluminium beading complete all as specified and directed by Engineer-in-charge

S&F in repairs, 25 mm bore stainless steel curtain rods (wall thickness 1 to 1.5mm) including two fixing stainless steel round or half round with fixing nuts (bracket holders) & stainless steel finish end knobs(Two number for each curtain rod of any length) complete all as specified and directed by Engineer-in-charge

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but nexc 4 sqm each complete all as specified and directed by Engineer-in-charge

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge

S&F 2nd class 35 mm thick hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified and directed by Engineer-in-charge

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge

M&L preparation of new untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and directed by Engineer-in-charge

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge

S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2020 Part II complete all as specified and directed by Engineer-in-charge

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-charge

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and directed by Engineer-in-charge

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge

S&F aluminium alloy anodised,barrel tower bolts of extruded section, of size 200 mm. complete all as specified and directed by Engineer-in-charge

S&F for ISI marked 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and directed by Engineer-in-charge

S&F aluminium alloy handles extruded, fabricated type, anodised ,of 200 mm size. complete all as specified and directed by Engineer-in-charge

S&F aluminium alloy handles extruded, fabricated type, anodised ,of 150 mm size. complete all as specified and directed by Engineer-in-charge

S&F floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece. complete all as specified and directed by Engineer-in-charge

S&F rolled mild steel in Fe 410-W(Gde-E-250) quality-A, framed work as in doors or gates of angle or other section with gusset plates, etc., complete, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-charge

S&F in repairs fabricated aluminium door with shutter powder coated (minimum thickness 50 micron) , chowkats /frame made with aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top / middle / bottom rail of shutter with sections 112 x 44 x 2mm thick, including provision of 5 mm thick tinded glass panes , with necessary fixing arrangement ,jointing cleats ,glazing clips , rubber packing aluminium anodised beading screw sets floor hinges tower bolts 200 mm size, mortice lock 100 mm size 4 lever , round handles etc , fitted to shutter and frames fixed in positon with aluminium hold fast of size 25 x 3 mm flat , 150 mm long , 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing surfaces complete all as specified and directed by Engineer-in-charge Note:- The rate quoted by the tenderer shall inclushive of all the fittings fixture, tinted glass PCC etc and nothing extra shall be paid on this account.

S&F in repairs fabricated aluminium window with powder coated (minimum thickness of powder coating 50 micron) aluminium frame of section 63.5 mm x38.1mmx1.5 mm thick, shutter with section 47.62 mmx44.45mmx1.5mm thick including aluminium anodized "D" Handle of size 150 mm long and each shutter having one handle and 03 Nos of hinges of size 100 mm , each shutter having 01 peg stay, 150 mm long tower bolt each shutter having 02 Nos etc including jointing cleats for fixing builder's hardware fittings and provision of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples including necessary fittings/fixture/aluminium snap beads complete all as specified and directed by Engineer-in-charge Note:- 1.Measurement shall be taken for clear opening ie out to out of window frame as a whole. 2. The rate quoted by the tenderers shall inclushive of including all fittings, fixtures and wire cloth nothing extra shall be paid seperately

S&F in repairs Aluminium powder coated Grill (DECO grill DG 103 of 7.5 mm thick of M/s ELESAR , M/S Royal Grill , M/S National Grill Associated profiles & Aluminium Ltd ) fixed with suitable 'F' Section (No 8584) 15.30 X23.40X 1.40 mm (minimum ) , fabricated adn riveted to aluminium window / ventilators complete all as specified and directed by Engineer-in-charge

S&F 100mm butt hinges, heavy weight, cold rolled mild steel, complete all as specified and directed by Engineer-in-charge

S&F in repair for mild steel handle for steel window left or right complete all as specified and directed by Engineer-in-charge

S&F non-skid dark colour ceramic tiles 300 mm x 300 mm x 6 to7mm thick in floor etc, set and jointed in neat cement slurry and pointed in white cement laid over and including 15 mm thick screed bed in cement mortar 1: 6 etc complete all as specified and directed by Engineer-in-charge

S&F non-skid light colour ceramic tiles 400 mm x 400 mm x 6 to7mm thick in floor etc, set and jointed in neat cement slurry and pointed in white cement laid over and including 15 mm thick screed bed in cement mortar 1: 6 etc complete all as specified and directed by Engineer-in-charge

S&F coloured glazed ceramic tiles of size 300mm x 450mm x 6-7 mm thick, on vertical surfaces such as dados etc, set and jointed in neat cement laid slurry and pointed in white cement over and including 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and directed by Engineer-in-charge

S&F in repairs non skid floor tiles of any size in patches (area of each patch n.exc 1.5Sqm) set and jointed in neat cement sluurry and pointed in white cement laid over and including 15mm thick secreed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge

M&L 15 mm thick rendering with ready mix plaster as manufacturer's instructions in patches (each patch n.exc 0.5 sqm in area) on faces of bricks or concrete surfaces , finished even and smooth including taking down cement plaster in patches complete all as specified and directed by Engineer-in-charge

M&L 5 mm thick rendering with ready mix plaster (as manufacturr's instructions) on ceiling , finished even and smooth complete all as specified and directed by Engineer-in-charge

M&L for preparation of newly plastered surfaces and applying three coat of white wash on wall complete all as specified and directed by Engineer-in-charge

M&L for preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar complete all as specified and directed by Engineer-in-charge

M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-charge

M&L 15 mm thick rendering with ready mix plaster ( as manufacturer's instructions ) on faces of bricks or concrete surfaces , finished even and smooth complete all as specified and directed by Engineer-in-charge

M&L for 2nd class hard wood Plain fillets, square, rectangular or triangular in sectional area exc 13 and n. exc 25 cm , clean sawn, secured with mills or brads complete all as specified and directed by Engineer-in-charge

M&L chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as anti-rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying guniting over steel welded mesh 2mm dia of wire and aperture 75mm, total thickness of guniting not exceeding 25mm thick (average thickness) auth cement mortar 1: 2 using OPC 53 grade cement mixed with Polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying 15 mm thick rendering with ready mix plaster ( as manufacturr's instructions ) on faces of bricks or concrete surfaces , finished even and smooth over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc and over a two coats of cement base paint complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height up to 4 storey buildings cocomplete all as specified and directed by Engineer-in-charge Notes : (i) Steel welded mesh shall be tightened /welded with the existing reinforcement. (ii) The cost of welded mesh shall deemed to be included in the unit rate quoted.

All same as per item No. 89 above total thickness of guniting 40mm thick (average thickness).

S&F TMT mild steel 10mm dia and over bars cut to length required including cranking, bending and binding with MS (annealed) wire not less than 0.9mm dia or welding where required complete all as specified and directed by Engineer-in-charge

All as per above ser item No 91 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-charge

M&L for preparation of old surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-charge

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features by washing, rubbing down and stopping of distmpered and painted surfaces of walls and applying one coat of oil emulsion distemper white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed by Engineer-in-charge

M&L for preparation of old decorated surfaces of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots applying one coat of white wash to obtain uniform surfaces including scafolding arrangement, trestles, ladders etc complete all as specified and directed by Engineer-in-charge

All as per Srl No 95 above but one coat of white wash on ceiling.

M&L for preparation of old painted wooden or wood based surface of any desceiption no otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (approved tint) upto four storey bldg complete all as specified and directed by Engineer-in-charge

M&L for preparing of old painted surfaces of steel of any description over 10 cm width or girth and applying on coat of synethic enamel paint on steel surfaces complete all as specified and directed by Engineer-in-charge

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.

M&L preparation of newly plastered surfaces of walls , applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-charge

S&F in repairs 1.25 mm thick steel rolling shutters, with gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed by Engineer-in-charge

Preparation of new untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-charge

Demolition of RCC as in Chajjas, fascia, cut to reinforcement upto RCC beam, making good as existing surface with plaster in cement mortar (1:4) & match with existing finishes of cement base paint upto G+3 Storey building including necessary scaffolding complete all as specified and directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish all the permises complete all as specified and directed by Engineer-in-charge

Cleaning of manhole of size n.exc 1.5m x 1.5m x 1.50m by taking out the sludge mud/silt etc and removing to outside of MoD premises(at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by Engineer-in-charge

Demolition of brick work / stone boulder measonary built in cement mortar or cement lime mortar of any description and in any position complete all as specified and directed by Engineer-in-charge

M&L for brick work using old size bricks of class designation 10, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and directed by Engineer-in-charge

All same as per Ser Item No. 107 above but here-in-before but except bricks.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of briick or concrete surfaces, finished fair & even (for manholes etc) without using extra cement complete all as specified and directed by Engineer-in-charge

Excavation in trenches in soft/loose soil, not exc 1.5m wide & n exc 1.5m in depth as in foundation , mainholes etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-charge

Demolition and breaking up drain pipes (salt glazed stoneware/ACC/RCC), set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge of following sizes of pipe:-

150 mm dia

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed by Engineer-in-charge

Demolition of cement concrete (unreinforced) of any description, in ground floors and pavings not exceeding 15cm thick complete all as specified and directed by Engineer-in-charge

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against sides of pipes after they are laid and tested, complete all as specified and directed by Engineer-in-charge

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and directed by Engineer-in-charge

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all as specified and directed by Engineer-in-charge

S&F in repairs factory made SFRC manhole cover size (1200 X 600 x 70 )mm thick with frame set in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE” (ii) Contractor will produce the manufactuerer test certificate of SFRC cover & frame while claiming the payment.

M&L in repair, salt glazed stone ware gully trap, square or round mouthed,150mm x 150 mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and directed by Engineer-in-charge

Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc complete all as specified and directed by Engineer-in-charge

Add or deduct for each 25mm girth or part thereof over or under 30cm ditto

M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engineer-in-charge

M&L plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified and directed by Engineer-in-charge

Note for Srl item No 81, 82 & 87 :- 1.Make of ready mix plaste shall be Birla Aerocon/Ultratech radiplast/ACC Acoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturar or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

tomar and associates

VED PRAKASH ARORA

B. S BUILDERS

P R Constructions