REPAIR/ REPLACEMENT AND ALLIED WORK OF INTERNAL ELECTRIFICATION AT OTM ACCN AT WING-III UNDER GE NRC.

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. For one light point controlled by one, one way switch. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

S &F Switch piano flush type single pole one way 5 amps.

S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S &F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply and fixing in repair LED Batten 1x 20W, 220V, AC, with driver, holder excluding LED tube light mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in repair LED Batten 1x 18W, 220V, AC, with driver, holder excluding LED tube light mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair 20 Watt LED Tube Light (4 feet) Ultra bright , (single side connection) with very high efficacy & THD <15% best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light.

S&F in repair 18 Watt LED Tube Light (4 feet) Ultra bright , (single side connection) with very high efficacy & THD <15% best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light.

S&F in repair LED 20W Batten with Motion Sensor (4 feet) Main Housing: PC, Front Cover: PC diffuser, LED: LM80 certified LED, Lumen Maintenance: 50000 hours @ L70, LED Driver: Constant current LED Driver, Internal Wiring: Insulated Cu wire, Hardwares: SS & MS Zinc plated and passivated, Ingress Protection: IP20, Operating Voltage Range: 140V~ 270V, Operating Temperature: -10ᵒC~ 50ᵒC, mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair LED 10W Batten with Motion Sensor (2 feet) Main Housing: PC, Front Cover: PC diffuser, LED: LM80 certified LED, Lumen Maintenance: 50000 hours @ L70, LED Driver: Constant current LED Driver, Internal Wiring: Insulated Cu wire, Hardwares: SS & MS Zinc plated and passivated, Ingress Protection: IP20, Operating Voltage Range: 140V~ 270V, Operating Temperature: -10ᵒC~ 50ᵒC, mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in repair inverter bulb LED 9 W. Make : Havells Cat Part No-LHLDEGEDML8O009 or eqvt in in Crompton, Bajaj, Halonix or as approved by GE

Supply and fixing in repair inverter bulb LED 12 W B22 CDL. Make : Havells Cat Part No-LHLDEGEDML8O012 or eqvt in Crompton, Bajaj, Halonix or as approved by GE

S & F in repair 25 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

S & F in repair 30 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

S & F in repair 35 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

M&L for Fabrication ,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for upto 35 W LED security light fitting.

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 87,120.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Mehta and Co.

Mayur Electro Enterprises

sapana enterprises

MAHIMA CONSTRUCTION

shubham Enterprises

Santhi Enterprises

LOKMANYA ENTERPRISES

Bidder Name

SHRI SULAI ELECTRICALS

Santhi Enterprises

sapana enterprises

MAHIMA CONSTRUCTION

Mehta and Co.

LOKMANYA ENTERPRISES

Mayur Electro Enterprises

shubham Enterprises