Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹31.4 L+₹1.9 L (6.40%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹32.5 L+₹3.0 L (10.2%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹32.8 L+₹3.3 L (11.4%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹33.6 L+₹4.1 L (13.9%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
5 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
CERTAIN REPAIR TO 15 IDSR, CWE OFFICE, ENGR REGT, CMP LOC, BDE HQ AND NEAR BY AREA UNDER AGE BR-I AT AMRITSAR CANTT
2023_MES_617780_1
GE/ASR-45/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹90,000
1 Oct 2024
8 Sept 2023
6 Oct 2023
8 Sept 2023
5 Oct 2023
22 Sept 2023
Amount
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.
All as per Srl item No 2 above but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused after necessary cleaning of mortar).
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement, including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement, including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement, including taking down cement plaster of any description ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repairs of Chajja, Fascia, parapets etc using chicken wiremesh upto 4 m height including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repairs of Chajja, Fascia, parapets etc using chicken wiremesh height exc 4 m but n.exc 9m including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on walls ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Preparation of newly plastered surfaces of ceiling & applying two coats of white wash ; Complete all as specified and directed by Engineer-in-charge.
Taking down shutter of any description exc 1 sqm and n. exc. 2 sqm each ; Complete all as specified and directed by Engineer-in-charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment.
Material and labour for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty (i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf Note :- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately.
Material and labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-1019/08 dt 01.05.08 incuding cutting holes complete all as specified and directed as follows. (a) 3mm thick pin headed type glass sheet glazing with oil putty and Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesof appropriate size. Note:- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately.
Material and labour for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint and filling chowkhat with PCC 1:3:6, Type C-1 using 20mm aggregate, including hinges, hold fasts/lugs etc Including taking down old steel / wooden door with frame without taking off shutter including hold fast PCC 1:2:4 type B0 (Six No’s for Each Frame), painting & around required plaster in CM 1:4 and match with existing finish ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint and filling chowkhat with PCC 1:3:6, Type C-1 using 20mm aggregate, including hinges, hold fasts/lugs etc Including taking down old steel / wooden door with frame without taking off shutter including hold fast PCC 1:2:4 type B0 (Six No’s for Each Frame), painting & around required plaster in CM 1:4 and match with existing finish ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including taking down of old frames with shutters complete as per direction of Engineer-in-Charge NOTE:Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make: Echo Cell, Rajshree or equivalent make approved by GE
Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including taking down of old frames with shutters complete as per direction of Engineer-in-Charge NOTE:Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge
Supply and Fixing factory made 30-40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 150mm long Aluminium handles, cast type anodised ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge.
Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing including taking down of old door with frames etc ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site by means of PTMT/Aluminium/Stainless steel Hinges 75mm size. ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 125mm long Aluminium handles, cast type anodised ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing including taking down of old wooden/steel frame with shutter and around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and fixing in repairs aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring or side hung type using hinges of appropriate size, without sash bars but including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised), aluminuium anodised tower bolt 200 mm long, Hinges etc ; Complete all as specified and directed by Engineer-in-charge. Note :- Floor spring shall be measured and paid separately.
Supply and Fixing in repairs aluminium poweder coated shutter (for windows and ventilator) with style, top and bottom rail of section 44x44mm of 2mm thick side hung type, without sash bars including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized fittings such as peg stay 150mm long, handles 125mm, tower bolts 150 mm long, Hinges, etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Mild steel , Four lever, Mortice lock, verticle type of size 100mm ; Complete all as specified and directed by Engineer-in-charge.
Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening after repairs and easying shutter ; Complete all as specified and directed by Engineer-in-charge.
Taking down aluminium window shutters of area not exc 1 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening after repairs and easying shutter ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Framed work confirming to FE- 290 (Gde-E- 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing and taking down old frames ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour fixed in repairs 18/19mm thick Prelaminated HDHMR board, exterior grade, with decorative choice lamination, fixed with screws as in shelves/Shutters ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Continuous (piano) hinges, Width of flaps (when open) in 40 mm mild steel, bright finish or electro galvanised ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling including dismantaling of old boarding any type complete as specified and directed by Engr-in-charge
Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixe to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including demolition of old framing ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including removing old material ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 5mm thick hollow interlocking PVC wall lining consisting of plain colour PVC sheet 1mm thick inclusive of solvnt cement, PVC frames, PVC fasteners/SS screws and all necessary items like C-section at edges/L-Section at corners of matching colour etc for fixing at site as per specification and directed by Engr-in-Charge.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge. (WPC measured saperatly)
Supply only integral water proofing compound ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application over entire area, ; Complete all as specified and directed by Engineer-in-charge. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm.
Material and Labour for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Vitrified ceramic light shade tiles 8-10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor finishes, including dismantaling of old tile and cement mortar bedding ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 including dismantaling of old tile and cement mortar bedding ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface including dismantaling of old tile and cement mortar ; Complete all as specified and directed by Engineer-in-charge.
Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor line ; Complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs vitreous china wash down water closet pan (padestal pattern) with flush pipe 32mm dia for low level flushing cistern including plastic water closet seat cover white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, PVC trap 110mm bore , ; Complete all as specified and directed by Engineer-in-charge. (excluding flushing cistern).
Supply and Fixing in repairs vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repairs ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm ; Complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and Supply and Fixing rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks Exc 500 Ltr & not exceeding 1000Ltr and Supply and Fixing rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors Taking up or down existing steel water tubing alongwith connections fixed/laid in any situation ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors Taking up or down existing steel water tubing alongwith connections fixed/laid in any situation ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing PTMT shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of PTMT as in repairs ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Bib tap of PTMT, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 15mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 20mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 125mm dia PTMT grating fixed over trap with cement ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs centre hole mixer cast coppre alloy chromium plated with capston head (Pillar Mounted) srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs PVC Mirror cabinet with shelves of best quality including fixing arrangements size 350x450mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs PVC waste pipe32mm dia fixed to WHB/Urinals ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Granite (of any type) work (table rubbed and polished) 18-20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of old stone slabs ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection Finishing fair and even including roughning of existing surface ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of old stone slabs ; Complete all as specified and directed by Engineer-in-charge.
All as per Item here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.
Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigments over and including 25mm thick sand cushioning ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Chequered cement concrete coloured tiles 20cmx20cmx25mm / 30X30X25mm thick set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 100mm bore Cast iron floor trap, with grating including jointing to waste pipe in cement concrete type B-1(1:2:4) ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings including taking up/down existing pipe complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings including taking up/down existing pipe complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 110mm bore PVC (SWR) bends any radius With access door ; Complete all as specified and directed by Engineer-in-charge.
Dismantling brick tiles laid in single layer jointed & pointed in cement mortar ; Complete all as specified and directed by Engineer-in-charge.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding, concrete smooth finish avg 50mm thick to receive chemical treatment, and as in roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for priming the concrete surface with tarfelt LM or equivalent make approved by GE mixed with portable water in ratio of 1:1 and apply @ 400 gms per sqm (As per surface condition). Apply first coat of tarfelt LM or equivalent make approved by GE having elongation 200% confirming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm confirming to ASTM-C-412 with no diluion of water on primed surface while the surface is still tacky with consumption of 700 gms per sqm. Lay geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10 to 12 Hrs. Apply second coar on cured first coat with consumption @ 700gms per sqm in opposite direction of first coat by brush or roller. Allow it to dry for 10 to 12 Hrs. After apply third coat with consumption 700Gms per sqm . Ensure final curing time of 36 Hrs before allowing/Carring out any further work. Conduct ponding test after minimum 7 days applying two coats of UV resistand elastomeric exterior Axcrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make approved by GE having elongation of 300% after curing of 14 Days confirming to ASTMD-6083 for UV protection of bituminous elastomeric Acrylic Emulsified liquid membrane of Tarfelt LM or equivalent make approved by GE to give long life and prevent its detoriation from sunlight. ; Complete all as specified and directed by Engineer-in-charge. Note:- Work tobe executed through company auth applicator only, with certification of warranty.
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement ; Complete all as specified and directed by Engineer-in-charge.
All a per Srl item here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)
Material and Labour Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Flush pointing to brick tiles / tarracing tiles on roofs in cement mortar 1:3, including racking out of joints etc. ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour 50 mm thick pre-cast louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding but excluding frame and sey in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
Material and Labour precast cement concrete blocks type B-1 (1:2:4) using 20mm graded aggregate set in mortar 1:4 for posts, pillars etc for holding louvres & jallis ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 950 x 550mm with bowlsize 550x440x160mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including dismantaling of old sheeting ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes including distance pieces , cleats etc. incl of dismantaling of existing ; Complete all as specified and directed by Engineer-in-charge.
GEE EMM ASSOCIATES
m/s. gopal krishan
S S CONSTRUCTION COMPANY
ESS KAY BUILDER
RAJ KAMAL BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .