REPAIR REPLACEMENT OF LT CABLE AND MAINTENANCE OF EXTERNAL LT ELECTRIC SUPPLY, STREET LIGHT OF OLD VINTAGE TO NEW LED FITTING AND REPAIR OF SOLAR STREET LIGHT AT TECH AREA TAKU, ITARSI UNDER GE (I) (P) FYS JABALPUR

Amount

Excavation in trenches in any type of soil (loose/ hard) not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft/loose soil for foundation of pole, laying under ground cables etc and getting out complete all as directed.

All as per above item No. 1 here in before but for each additional 1.5 mtr or part thereof in depth beyond the first 1.50 mtr.

M&L for road cutting, PCC hard standing including excavation for laying of GI pipe 80/50/40 mm dia, and making good the disturbed surfaces all as per existing surface.

Returning filling in with the earth obtained from above item including spreading, levelling, watering and well ramming in layers and not exceeding 25 cm in layer complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and deposting where directed at a level not exceeding 1.5 Mtr above the starting point all as dircted.

Material and labour sand filling in trenches for cable cushioning with clean, dry and unwashed sand free from sharp particles including gently punning around cable complete all as specified and directed.

Material and labour Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

Stretching/restringing of ACSR conductor LT over head line of 4/6/8 wire run conductor comprising of any size on existing pole after opening from insulator by taking out of binding wire and refixing the same with suitable size of binding wire upto permissible sag after restringing including cutting of tree branches and trimming of tree branches of any size up to 2 Mtr each side of OH line which touch / fouling the OH line without damaging the same as under all as directed.

Material and labour for painting to steel tubular pole with aluminium enamel paint of 9.00 Mtr including cross arms, clamps any size and nuts, bolts etc with one coat of aluminium synthetic enamel paint including preparing the surfaces free from finish particalsand making the smooth surface and numbering on pole with black ground such as pole number and source of supply, painting with radium paint around the pole at width of 10cm, similar three rounds from 1.5 m GL top on circumferance of pole complete all as specified and directed.

Material and labour shackle insulator porcelain vitreous white or brown insulator working pressure 1100 volts including galvnised mild steel straps of size 31X 3 mm and 12 mm dia insulator bolts, washers and nuts etc complete including dismantling the existing insulators all as specified and directed.

Material and labour pin type insulator of size 100 mm height, 65 mm dia porcelain vitreous white or brown/green insulator for working pressure 1100 volts with one galvanised spindle and two galvanised iron washers and nut complete including dismantling the existing insulators all as specified and directed.

Supply and fixing in replacement stay assembly complete with comprising of galvanised iron stay bow of size 40 cm X14 cm, 20 mm dia & 1800 mm long GI stay rod including GI nuts MS stay plate 300 mm X 300 mm X 6 mm, 2 No thimble, 50X6 mm flat iron stay clamp, 16 mm dia bolts , nuts and washers etc complete including dismantling the existing stay assembly all as shown in electrical plate No 1 of MES SSR 1991 Part 1. Note :- Excavation and PCC, shall be measured and paid seperately .

Supply and fixing loop type insulator for stay assembly, porcelain vitreous of size 90 X 140 mm of clearance hole 25.5 mm complete including taking down the existing insulators complete all as specified and directed.

Materials and replacement of 1100 volts grade heavy duty XLPE cable of size 120 Sqmm 3 ½ core, with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC seathed, passing through GI pipe, in trench, on pole complete including taking down unservicable deffective cable or any type/size including disconnecting all electrical connection at site all as directed.

All as per item No.14 but cable of size 70 Sqmm 3 ½ core.

All as per item No.14 but cable of size 50 Sqmm 3 ½ core.

All as per item No.14 but cable of size 35 Sqmm 3 ½ core.

All as per item No.14 but cable of size 25 Sqmm 4 core

All as per item No. 14 but cable of size 16 Sqmm 2 core

All as per item No.14 but cable of size 10 Sqmm 2 core

Material and labour of GI pipe light grade 80mm bore with all fittings and fixed complete to wall, to pole or laid in trenches and road crossing complete including taking down existing GI pipe all as dircted.

All as per item No. 21 but 50 mm bore.

All as per item No. 21 but 40 mm bore.

Material and labour MS structure ( Fe-310-00 or Fe-410-00 ) such as MS flat, angle, channel etc in cross arm brackets, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as directed and including two coat of aluminium paint over a coat of red oxide primer complete including dismantling the existing cross arms of MS channel or angle sections all as specified and directed.

Material and labour PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate cast in position as in coping (for packing of steel structure above ground level) including necessary use of form work and fair finish to exposed surfaces complete all as specified and directed.

M&L for Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified type 410 SP-37 (9.5 meters long) incl two coats of silver paint over a one coat of redoxide paint complete as specified and as directed incl taking out old unserviceable PCC pole complete including dismantling unserviceable tubular pole all as directed. (Excavation, foundation concrete, preservative treatment etc will be measured and paid separately)

M&L for Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified type 410 SP-31 (9.00 meters long) incl two coats of silver paint over a one coat of redoxide paint complete as specified and as directed incl taking out old unserviceale PCC pole complete including dismantling unserviceable tubular pole all as directed. (Excavation, foundation concrete, preservative treatment etc will be measured and paid separately)

Material and labour ACSR conductor of any size fixing to insulator with necessary binding wire of suitable size complete including taking dwon ACSR conductor all as specified and directed. Note: 3% extra shall be added to the weight for sagging, jointing, jumpers, etc.

Material and labour replacement of galvanised steel continuous earth wire of size 4mm dia for earth continuty conductor including taking sown existing earth continuous conductor complete all as directed.

Material and labour replacement of GI cradle guard hexagonal/rectangular with galvanised steel wire of 4mm dia complete including taking down existing cradle all as directed.

M&L for replacement of galvanised stay wire stranded, size 7/4mm complete all as specified incl taking out old unsv galvanised stay wire complete.

M&L for switch fuse unit heavy duty, HRC fuse type including Sheet metal enclosure with TPN of capacity 125 Amps complete all as directed.

M&L for replacement of Switch fuse unit heavy duty, HRC fuse type including Sheet metal enclosure with TPN of capacity 200 Amps complete all as directed.

M&L in replacement of MCCB 200 Amp, four pole 415 Volts, breaking capacity 25 KA, fixed thrmal & magnetic setting with extended terminals,replacemenr to LT panel/ Feeder piller box including connecting lugs with busbar and including mounting arrengments e.i. screws, bolt, nut, washers incl taking out old unserviceable complete.

M&L in replacement of MCCB 160 Amp, four pole 415 Volts, breaking capacity 25 KA, fixed thrmal & magnetic setting withextended terminals,replacemenr to LT panel/ Feeder piller box including connecting lugs with busbar and including mounting arrengments e.i. screws,bolt, nut, washers incl taking out old unserviceable complete.

M&L in replacement of MCCB 100 Amp, four pole 415 Volts, breaking capacity 25 KA, fixed thrmal & magnetic setting withextended terminals,replacemenr to LT panel/ Feeder piller box including connecting lugs with busbar and including mounting arrengments e.i. screws,bolt, nut, washers incl taking out old unsv complete.

M&L in replacement of MCCB 63 Amp, four pole 415 Volts, breaking capacity 25 KA, fixed thrmal & magnetic setting (Havell cat No. IHLASF0630#) withextended terminals,replacemenr to LT panel/ Feeder piller box including connecting lugs with busbar and including mounting arrengments e.i. screws,bolt, nut, washers, incl taking out old unsv complete.

M&L for replacement of aluminum lugs suitable for aluminum cable of size 16 Sqmm complete all as directed.

All as per item No.39 but size 35 Sqmm.

All as per item No. 39 but size 50 Sqmm.

All as per item No. 39 but size 70 Sqmm.

All as per item No. 39 but size 95 Sqmm.

M&L in replacement of Cable gland coupling made out of brass of suitable size for LT under ground cable of size 50 Sqmm to 120 Sqmm coplete all as directed.

M&L for Earthing complete for various LT feder piller box, DG set, Transformer and Pump sets with galvanised earth plate electrod 600 x 600 x 6 mm thick burrieed directly in the (earth pit not less then 2.25mtr deep bellow ground level) with top edge of eath plate not less then 1.5mtr bellow the ground level, connected to galvanised iron strip 32X 6mm by means of bolts, nuts, chuck nuts and washers of galvanised iron or steel, GI pipe 50mm bore light gread for protection of earthing strip and water pipe of 20mm dia, upto earth plate, PCC chamber 1:4:8 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 12mm thick plaster in cement mortor 1:4, funnel with wire mess of 22 gauge (0.63) 8 mess per liner inch, 50mm thick cover of RCC 1:2:4 type B-1, using 20mm graded stone aggregate reinfoced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No.3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as directed incl taking out old unsv complete. Note: unit rate quoted is inclusive of earth strip and protection pipe upto 7.5 mtr from earth plate.

Supply and fixing in repairs of GI strip 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground incl taking down old unsv complete all as directed.

Material and labour PVC line spacer for four line LT over head line complete all as directed incl taking down old unsv complete.

Material and labour PVC line spacer for two line LT over head line complete all as directed incl taking down old unsv complete.

Cutting of unwanted tree branches distrubing of over head lines, 2meter clear and vegetation, bushes, small plants, srubs around the electric pole, in side installation, under the electric over head lines, disposing of unwanted material not exc 50 Mtr away from the site and putting the same in low laying area complete all as directed.

S&F in 1100 Volts grade heavy duty service line cable PVC insulated aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more that 1 metere apart including 4 mm suspension wire, one twin core cable flat or cicrular of aluminium condoctors size 10 Sqmm stranded conductor all as directed incl taking down old unsv complete.

Supply and install capacitor, metalized poly propylene heavy duty (MPP-H) three phase, 415 volts and 50 Hz system for permissible non-linear load 15 % of 10 KVAR capacity to maintain power factor complete all as directed.

Supply and install capacitor, metalized poly propylene heavy duty (MPP-H) three phase, 415 volts and 50 Hz system for permissible non-linear load 15 % of 15 KVAR capacity to maintain power factor complete all as directed.

Supply and install capacitor, metalized poly propylene heavy duty (MPP-H) three phase, 415 volts and 50 Hz system for permissible non-linear load 15 % of 25 KVAR capacity to maintain power factor complete all as directed.

M&L CT coil of LT panel as per existing ratio complete including taking down existing unserviceable CT coil all as directed by Engr-in-Charge.

S&F of 1100 Volts grade heavy duty cable PVC insulated copper conductor size 1.5 Sqmm, 3 core cable flat or cicrular, served with inner sheathing of PVC tape and overall PVC sheathed for street light connections incl taking down old unsv complete all as directed.

M&L sheet metal enclosure incl aluminium bus bar 200 Amp rating, TPN four pole, 415 volts of size (450x300x250) mm mounted on suitable wooden box on wall complete all as directed.

Supply and fixing electronic driver of cap 30/45 watt of existing make for LED street light fitting complete including taking down the existing unserviceable driver of any capacity all as directed.

Supply and fixing electronic driver of cap 60 watt of existing make for LED street light fitting complete including taking down the existing unserviceable driver of any capacity all as directed.

Supply and fixing electronic driver of cap 70 watt of existing make for LED street light fitting complete including taking down the existing unserviceable driver of any capacity all as directed.

Supply and fixing in replacement of electronic driver of cap 90 watt of existing make for LED street light fitting complete including taking down the existing unserviceable driver of any capacity all as directed.

M&L in of 1100 Volts grade, heavy duty cable, PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed for street light connections cable flat or cicrular of size 4 Sqmm twin core cable stranded conductor incl taking down old unsv complete all as directed.

M&L for of security/street light fitting 45 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadway luminars with high power LEDs as light source and electronic drive including fixing on LT pole/ wall with clamps ,nuts bolts ,washersall incl taking down old unsv of any type of fittings complete all as directed. Make: Havells Ct pt No-ENDURAPEARLNEOSL45LED757PASYTOPC HSN code 9405 or equivalent make in Bajaj/Wipro/crompton/Philips.

M&L for security/street light fitting 60 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadway luminars with high power LEDs as light source and electronic drive including fixing on LT pole/ wall with clamps ,nuts bolts ,washersall incl taking down old unsv of any type of fittings complete all as directed. Make: Havells Ct pt No-ENDURAPEARLNEOSL60LED757PASYTOPC HSN code 9405 or equivalent make in Bajaj/Wipro/crompton/Philips.

M&L for replacement of security/street light fitting 70W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including fixing on LT pole/ wall with clamps ,nuts bolts ,washersall incl taking down old unsv any type of fittings complete all as directed. Make: Havells Coad. ENDURACITYLINERNESOL70WLED757PASYBOTG, HSN code 9405 or equivalent make in Bajaj/Wipro/crompton/Philips.

M&L for LED flood light fitting, 120 W LED flood light Energy Saving & Environment friendly long life exclusive innovative diecast aluminium IP66 suitable for highlighting architectural facde and general purpose lighting, incl takng down old unsv any type of fittings complete all as directed by Engr-in-Charge. Ct pt No-JETAIRISFLS120WLED757APNBLTG of Make: Havells or equivalent make in Bajaj/Wipro/crompton/Philips.

M&L in replacment of 1100 Volts grade, heavy duty cable, PVC insulated copper cable, served with inner sheathing of PVC tape and overall PVC sheathed for hight mast light connection cicrular of size 2.5 Sqmm three core cable stranded conductor complete all as directed incl taking down old unserviceable complete.

Supply and fix in GI pipe 40mm dia, medium grade for mounting bracket bent to shape 1.75 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of Zinc oxide primer incl taking down old unsv complete all as directed.

Supply and fix in GI pipe 25mm dia, medium grade for mounting bracket bent to shape 1.75 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of zinc oxide primer including taking down old unsv complete all as directed.

Supply and fix in replacment of pole mounted wheather proof junction box size 340 X 160 X 90 mm with porcelain connector 2 Nos, colour coaded aluminium bus bar of rating 63 amps mounted on non cracking epoxy insulators, MCB SP 10Amps, 250 volts, 'C' curve - 02 Nos. Mounted in including provisioning of mounting arrangements with clamps, nut, bolts, and washer etc for fixing to pole, drilling with proper hole for incoming and outgoing cables of suitable size , conecting existing cables with bus bar including taking down old unsv complete all as directed.

M&L for battery EXIDE SOLATRON including factory made Box made of PVC box suitable for all weather for holdinng of battery, suitable for Solar street light, photovoltaic applications have been designed to provide high cycling performance under tropicalised battery of capacity, 12Volts 100 Ah of Make Exide Model FKSO100AH including taking down old unsv solar panel as per existing size complete all as specified and directed.

Refilling of distilled water and check the graviti of distilled water and improve graviti and efficiency of battery complete all as directed.

Recharging of solar batterys including taking out care fully, transportation from the site of tech area Taku to battery shop Itarsi, battery charge with 12 hrs, and refixing the same and testing of the solar street light must be of satisfaction of engineer-in-charge.

S&F in new generation post-top energy saving environmental friendly, long life aesthetically design with symmetrical light distribution, spun aluminium landscape luminarie with high LED 15 watt as light source incl complete accessories including taking down old unsv complete all as directed. (Make: cat pt No- CORALMINIPT15WLED 757PSYMTOPC of make Havells or equivalent make in Bajaj/Wipro/crompton/Philips.

Supply and fixing of street light auto timer panel (light sensor type nature switches), plastic body degree of protection conforms to IP64 , operating illumination level for switching ON should be less than 60 lux for 30 seconds and for switching off must be greater than 10 lux for 30 seconds, multiple option switch for automatic and manual operations, capable to handle lightning load up to 12 KW, including MCB capacity 40 Amp conforms to IEC-60898 and IS-8828, Power contactor capacity 40 Amp conforms to IEC 60947-4-1, IS 13947-4-1 completely enclosed with plastic body panel conforms to IP 54 degree of protection, fixing with pole/LT panel/ LT Feeder piller box including fixing arrengments all as specified and directed incl taking down old unsv complete. Make : Kakatiya Energy systems Pvt Ltd, Model No SWADEEP- 02EC 12kW3P or equivalent make in L&T/Schneider/Legrand.

M&L for hinges and welding existing to LT panel board complete all as directed.

M&L for shutter of with 3 mm thick CRCA sheet as per exisitng size to match with the existing panel and welding hinges and fixing complete including taking soen the existing shutter all as directed.

M&L for painting of existing LT panel board with spray gun with synthetic enamel paint to match with the existing surface complete all as specified and directed.

M&L of old burnt out aluminium bus bar and connected links of LT panel board, current rating 200 Amps as per existing size incl taking sown old rusted nut & bolts, washers complete all as directed.

M&L for replacment of old burnt out copper bus bar and connected links of panel board, current rating 63/100/200 Amps as per existing size incl taking down old rusted nut&bolts, washers complete all as directed.

S&F indicators LED type complete all as directed.

S&F Ampere meter analog type 0-600, 0 to 400, 0 to 200 96 sqmm square type flush panel mounted completed all as directed.

S&F Volt meter analog type 0-500 Volt 96 sqmm square type flush panel mounted complete all as directed.

M/s SHIVRATAN CONSTRUCTION

Veer Brothers

TANUJ CONST. CO.

pyarelal galar