PWD/SE/KEC/NIT-05/19-20

Amount

Electrical Installation Work Supplying and fixing double door Horizontal 6 Way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/Siemens/ABB) Incommer - 400V, 63 Amps, 4Pole MCB Isolator - 1 no. Outgoing - 230V, 6-32 Amps, SPMCB - 18 nos.

Supplying and fixing double-door 2+12 Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/Siemens/ABB) Incommer - 230V, 40 Amps, 2Pole MCB Isolator - 1 no. Outgoing - 230V, 6-32 Amps, SPMCB - 12 nos.

Supply and laying 1.1 kv grade 4 core 35 sq. mm/A cable (Make-Nicco/Glostar/Polycab/Havells/RR Kable/Crystal) partly concealing in wall and partly surface on wall by GI shaddle as to GS as per direction of EIC.

S & F compression type brass cable glande for 4 core 35 sq. mm/A cable incl. S & F finishing end of the cable dowal socket by crimping method as to GS

Supply & Drawing following PVC insulated & unsheated CU wire (Finolex/Havelles/Polycab) in 20 mm dia PVC rigid conduit surface on wall & 20 mm dia PVC polythene pipe for drop conceal & mending good the damages as to GS as per direction of EIC. (a) 2x6 sq.mm + 1x4 sq.mm for SPNDB.

Do----Do----Do (b) 2x4 sq.mm + 1x2.5 sq.mm for Power plug

Do----Do----Do (c) 2x2.5 sq.mm + 1x1.5 sq.mm for Computer plug point.

Do----Do----Do (d) 2x1.5 sq.mm + 1x1.5 sq.mm for wiring.

Finising the end of following stranded copper wire as per GS. (a) 2x6 sq.mm + 1x4 sq.mm

Do----Do----Do (b) 2x4 sq.mm + 1x2.5 sq.mm

Do----Do----Do (c) 2x2.5 sq.mm + 1x1.5 sq.mm

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works [make-Siemens/Legrand/MK (Honeywell)] (a) 6 module box with switches

Do----Do----Do (b) 4 module box with switches

Do----Do----Do (c) 2 module box with switches

Supply & Fixing 4 no. 240 V, 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch [make-Siemens/Legrand/MK (Honeywell)], 2 row,12-Module sheet metal board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

S&F 240 V, 20A, modular plug socket [make-Siemens/Legrand/MK (Honeywell)] with separate 20 A modular switch [make-Siemens/Legrand/MK (Honeywell)] on 4-module sheet metal board embedded in wall incl. cover plate and making necessary connections as required.

S&F 2 no. 250V, 6A, 5 pin modular type plug socket & modular type switch [make-Siemens/Legrand/MK (Honeywell)] fixed on 6-module board concealed in wall as directed by EIC.

S&F 1 no. 250V, 6A, 5 pin modular type plug socket & modular type switch [make-Siemens/Legrand/MK (Honeywell)] and 1 no. 250V, 20A, 6 pin modular type plug socket & modular type switch [make-Siemens/Legrand/MK (Honeywell)] fixed on 6-module board concealed in wall as directed by EIC.

S&F 2 no. 250V, 20A, 6 pin modular type plug socket & modular type switch [make-Siemens/Legrand/MK (Honeywell)] fixed on 6-module board concealed in wall as directed by EIC.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make list) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/ fan/call bell points with Modular type switch [make-Siemens/Legrand/MK (Honeywell)] fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] (a) Average run 8 mtr

Do----Do----Do (b) Average run 9 mtr

Do----Do----Do (c) Average run 10 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision/ATUL/VIP/UNIVERSAL/BEC/Polypack/Prestoplast make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. (a) On Board

Do----Do----Do (b) Average run 1.5 mtr

Do----Do----Do (c) Average run 4.5 mtr

Do----Do----Do (d) Average run 7.5 mtr

S & F 230 volt Ding Dong type call bell on T.W board as to G.S (Make-Anchor/Bajaj)

S&F Recess Mounted square 2 ft x 2 ft non dimmable LED fitting with energy efficient diffuser having system lumen output not less than 3600 lumen, power input not more than 32 watt colour temparature 6500K/4000K (as per site requirement), CRI > 80, IP rating 20 (Make- Philips Cat No.RC380B LED36S -4000 G4 L60 W60 PSU OD WH OC or eqv of Crompton/ wipro).

Re-Fixing only 2ft x 2ft Existing old fittings on the existing POP false celling by skilled labour and mending good the damages as per direction of EIC

S&F 15W LED recessed mounted ultra slim panel light fittings with Aluminium di-cast housing and poly carbonate diffuser, 6000K as directed by EIC.(Make- Philips/ Wipro/ Crompton).

Re-Fixing only existing old circular panel light fittings on the existing POP false celling by skilled labour and mending good the damages as per direction of EIC

S&F 16" sweep Wall-fan (Orient make, Wall-45 or similar spec of Crompton Greaves/Usha/EPC), as directed by EIC.

S&F 16" sweep Pedestal fan (Orient make, Stand-37 or similar spec of Crompton Greaves/Usha/EPC), as directed by EIC.

Supply & Installation of 15 Lt. Capacity Geyser (Havells make : Model Bello or equivalent model of AO Smith/Jaquar) including connection with plumbing line as directed by EIC.

S&F LED Footlight (Make-Siemens/Legrand/MK (Honeywell), with lamp, as directed by EIC.

S&F of single Decorative bracket with 9W LED lamp (as per sample), as directed by EIC.

S&F of double Decorative bracket with 9W & 4W LED lamp (as per sample), as directed by EIC.

S&F LED Mirror Light (Crompton - Cat No. LCL-14-CDL or similar spec of Philips/Syska /Wipro) as directed by EIC.

S&F Mirror Light with 11W PL-S lamp (as per sample) as directed by EIC.

S&F of LED "IN/OUT" board with necessary clamping arrangements as directed by EIC

S&F of LED "ENGAGE" board with necessary clamping arrangements as directed by EIC

Labour charges for dismantling the existing fittings and existing wiring etc. From 1st floor to 4th floor.

Supply and laying the 1.1 kv grade 4 core 185 sq.mm cable (Make-Nicco/Glostar/Polycab/Havells/RR Kable/Crystal) with 2x8SWG GI wire, on existing cable tray PVC/A Aluminium cable on existing cable tray as to GS.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables of 4 core 185 Sq.mm.

Supply & laying of 1.1KV single core stranded 4x10sqmm + 2x6sqmm FRLS PVC insulated & unsheathed copper wire (Finolex/Havelles/Polycab) in 32 mm dia heavy gauge PVC pipe on wall/tray, incl. mending good the damages as per GS.

Finising the end of 1.1KV single core stranded 4x10sqmm + 2x6sqmm FRLS PVC insulated & unsheathed copper wire as per GS.

S&F of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support as per GS. (a) 300x50x1.25mm (18SWG)

Do----Do----Do (b) 200x50x1.25mm (18SWG)

Do----Do----Do c) 150x50x1.25mm (18SWG)

Do----Do----Do d) 100x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support as per GS. (a) 300x50x1.25mm (18SWG)

Do----Do----Do (b) 200x50x1.25mm (18SWG)

Do----Do----Do (c) 150x50x1.25mm (18SWG)

Do----Do----Do (d) 100x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray reducer with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the reducer incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support as perb GS. (a) 300x50x1.25mm (18SWG)

Do----Do----Do (b) 200x50x1.25mm (18SWG)

Do----Do----Do (c) 150x50x1.25mm (18SWG)

Do----Do----Do (d) 100x50x1.25mm (18SWG)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as per GS.

Connecting the equipments to earth busbar including S&F 2x8SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS. N.B: (a) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. (b) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. (c) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

JADOB ELECTRIC CO.

Prava Enterprise