RENOVATION OF TOILETS KAVERI BLOCK AT KV SCHOOL UNDER GE (NORTH) BENGALURU

Amount

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exceeding 1.5 sqm each including making good to match with adjoining surafces etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each including making good to match with adjoining surafces etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden /Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in levelling course of flooing etc complete all as specified and as directed

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L Glazed ceramic coloured tiles 350X250X7mm / 450X 350 X 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including backing coat 10 mm thick in cement mortar (1:4) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing including demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

M&L Pre-cast Cement concrete (1:3:6) using 20 mm graded crushed stone aggregates as in solid block masonary exc 10 cm in width and setting in cement mortar (1:6) including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar (1:6) etc including demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling concrete surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement, mixed with water proofing compound complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating including taking down existing treatment with PCC as in sunken protion of WC and removing to a distance exceeding 1.00KM but not exceeding 5.00KM. The following procedures to be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. Notes: (a) Girth of sunken floor shall be considered for payment purpose. (b) Depth of sunken slab shall be exceeding 30cm but not exceeding 60cm

M&L cement concrete (1:2:4) type B0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating, necessary formwork all as specified & as directed

Supply only water proofing liquid compound, ISI marked complete all as specified and as directed.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 (Gde E-165) etc complete all as specified and as directed

S&F flush door shutter 35mm thick, solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S & F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Aluminium window and ventilator shutters, Powder Coated (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed

S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not exceeding 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F butt hinges 100 mm size, medium weight, mild steel cold rolled and fixed etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

S&F Aluminium handle 150 mm size cast type, anodised etc complete all as specified and as directed

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed

S & F in repair ceramic wash down water closet pedestal pattrn pan, floor mounted concealed S trap for better aesthetic, single piece (One piece) snow white including slim whitest soft close seat cover etc complete all as specified and as directed

S&F in repair, Vitreous china squatting pattern water closet, 'Orissa pattern' of size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and as directed

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long waste pipe complete all as specified and directed.

S&F in repairs vitreous china wash basin snow white, oval bowl type, size 450 x 350mm x 150 mm counter top including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long waste pipe complete all as specified and directed.

S&F in repairs Viterous China ceramic urinals, wall mounted with spreader hole and fixing accessories of size 355x340 x535 mm including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs Viterous China urinals, wall mounted with in built sensor flushing of size 370x390x610 mm including complete Sensor type, touch free facilities, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40 mm dia PVC waste pipe 610 mm long and flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S & F PVC connection 15mm size with PTMT nuts of length 600mm long complete all as specified & directed.

S & F in repairs Centre hole Basin mixture 15 mm dia bore without Pop Up, brass chromium plated all as specified and as directed.

S & F in repairs 15 mm pillar taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed.

S&F in repairs overhead shower 100mm with Arm 225mm long, brass chromium plated & flange including fixing to steel pipe 15mm dia bore or union complete all as specified and as directed.

S & F in repairs Angle cock 15mm dia bore chromium plated cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc complete all as specified and as directed.

S & F in repair Bib Cock 2 way, 15mm dia bore brass chromium plated, double handle with CP flange all as specified and as directed.

S & F in repair Bib tap long body 15mm dia bore, brass chromium plated with CP flange, wall mounted all as specified and as directed.

S & F in repair Bib tap, brass chromium plated 15mm dia with CP flange all as specified and as directed.

S & F in repairs Health faucet, brass chromium plated body with 1mtr stainless steel braided tube & wall hook complete all as specified and as directed

S & F in repairs Towel rail 600mm long stainless steel glossy finish not less than 25mm dia complete all as specified and as directed.

S&F in repairs Towel ring Brass chromium plated round glossy finish complete all as specified and directed

S&F in repairs Soap dish, chromium plated brass, fixed on wall complete all as specified and as directed.

S & F in repairs Mirror 600x450 x 5-6mm thick with plastic frame with hanging system complete all as specified and directed

S & F in repairs Unbreakable (Square) wall mounted shelf 500mmx150mm with 2Nos of SS rail etc complete all as specified and directed

S&F in repairs Unbreakable corner shelf 8" semi circular with 2Nos of stainless steel rail complete all as specified and directed

S&F in repairs Toilet paper holder brass chromium plated fixed in wall complete all as specified and directed

S & F CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified.

S & F CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) triple layered, 1000 ltrs capacity, hoisted and fixed in position all as specified in SSR part I including ball float valves 25 mm dia of bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball etc complete all as specified and directed

S & F in repairs gun metal globe or gate valve 25 mm dia, with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs PVC (SWR) Multi floor trap,75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC SWR pipes,110 mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor etc including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC SWR pipes, 110 mm dia bore single socketed in any length with rubber ring joint fixed on walls etc including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC, SWR pipes, 75 mm dia bore single socketed in any length with rubber ring joint laid in trenches or in floors incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC, SWR pipes, 75 mm dia bore single socketed in any length with rubber ring joint fixed on walls including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC (SWR) bends (any radius) 110 mm dia complete all as specified and as directed

S&F PVC (SWR) bends (any radius) 110 mm dia with acess door complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 110 mm dia complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 110 mm dia with access door etc complete all as specified and as directed

S&F PVC (SWR) bends (any radius) 75mm dia complete all as specified and as directed

S&F PVC (SWR) bends (any radius) 75mm with acess door etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 75mm dia etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 75 mm dia with access door etc complete all as specified and as directed

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 110 mm dia complete all as specified and as directed .

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 75mm dia complete all as specified and as directed .

S&F in repairs PVC (SWR) vent cowls 110 mm dia bore complete all as specified and as directed .

S&F PVC (SWR) vent cowls 75 mm dia bore complete all as specified and as directed .

M&L for preparing newly plastered ceiling surface and applying three coat of white wash complete all as specified and as directed

M&L for Preparing Old treated ceiling surface and applying one coat of white wash complete all as specified and as directed

M&L for preparing of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper acrylic emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L for complete removal of old treated wall surface and applying two coats distemper acrylic emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L Preparing new or previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint or requrired shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and directed.

Removing building materials etc. to a distance of exceeding 900 Km but not exceeding 1.00KM including loading, unloading and stacking at the destination etc complete all as specified and as directed (Note : 1Metric tonne=1 load, 1cum=1735kg)

PRACHANIVA CONSTRUCTIONS (BID ID -3189408)

Sangam Construction (BID ID -3197193)