Carrying out fencing, compound walling and land development of the premises of the proposed 1 x 10 MVA 33 11 KV Receiving Station at Sail Beerwah Budgam.

Part A: Boundry wall

Earthwork in excavation over areas (exceeding 30 cms in depth, 1.5m in width as well as 10 Sqm on plan) incld. disposal of excavated earth, and lift upto 1.5m, (All kinds of soil).

Providing & laying of stone soling in level.

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand).

Reinforced cement concrete M 20 grade in walls (any thickness) incld. attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. upto floor five level excluding cost of centering, shuttering, finishing & reinforcement .

Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete (T.M.T).

Centering & shuttering incld. strutting, propping etc. & removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Structural steel work revited in built up sections, trusses and framed work, including cutting, hoisting, fixing in position, steel work to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge.

Providing and fixing Galvanized Iron chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel works

Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Part B: Gate

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and steel work to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge.

5Mtrx2.5Mtr

1Mtrx2.5Mtr

Providing and fixing of Retro-reflective regulatory sign board of size 0.9m x 5m made out of 1.5mm thick MS sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the MS sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 2 No. 50x50x3mm square post made of M.S. square hollow tube, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of MS sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge.