REPAIR/MAINTENANCE OF INTERNAL LINK ROAD AT IMTRAT.

Amount

Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken sufraces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using viscosity grade bitumen VG-10 @ of 5 Kg per 10 sqm complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 40mm thick consolidated thickness with 5.5% binder paving bitumen content by weight of total mix compacted to required camber and gradient using mechanical self propelled paver and rolled with pnuematic vibratory power 8 to 12 tones capacity complete all as specified and directed.

M &L for preparing bituminious surfaces of road and marking 2.5mm thick centre line, stop lines, dashes, arrow etc and the line n exc 10cm wide on roads pavements with hot applied thermo plastic road making paint of approved colour cinfirming to BS 3262-1989 with special application machine all as per manufacturers instruction complete all complete all as specified and as directed. Note :- Application shall be carried out through mechanical applicances by the approved applicator of the manufacturer of paint.

S & F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65 mm) of high efficiency Mono rystafic solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc complete all as specified and directed.

S & F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete as as specified and as directed.

NARAYAN MAJUMDER