MMPPNA_RIDF_XXXI_25_26_146 Construction of (i) Road from Loramukh Tiniali to Loramukh Namghar (Ch 0.00 m to Ch 1300.00 m), (ii) 2 No. Rongabononi Road (Ch 0.00 m to Ch 1300.00 m), (iii) Road from Gharbandi Bamunpukhuri to Bamunpukhuri ME School (Ch 0

(i) Loramukh Tiniali to Loramukh Namghar (Ch. 0.00 m to Ch. 1300.00 m) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes , shrubs , saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm thickness as per Technical Specification Clause 201.(i) By Manual Means (a) In area of non thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads , transporting to site, spreding , grading to required slope and compacted to meet requirement of Table(300-2) with lead upto 1000m as per Technical Specification Clause303.1. (i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density , complete as per cl.401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requisite type of screening/ binding material to fillup the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405. Grading - III (Screening - B) (A) By Manual Means

Providing and laying interlocking concrete block pavement having thickness 80 mm as per Tech. Sp. Clause 1504 complete including carriage(a)Including Edge block / Edge restraints

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (i) 600 mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (i) 600 mm circular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes and conforming to the MoSrt & H specifications