PROVN OF PATHWAY ON BOTH SIDE OF INTERNAL ROAD AND CERTAIN CONNECTED BLDG AT J AND B SUB AREA SIG COY DANAPUR CANTT

Amount

Boring holes 3m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in column, pillar etc.complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for hard core of broken brick gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate), 75mm thick as in sub base finished even & fair etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

S & F for 100 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11 complete all as specified and directed.

S&F for extruded brass handles, fabricated type, anodized 150 mm size complete all as specified and directed.

S & F of 200 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 150 mm long (Length of bolt) brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolt complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer including 3 mm thick Birla/ JK wall putty complete all as specified and directed.

M&L for applying two coat of cement base paint on plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.

M&L for glazed ceramics coloured tiles of size 450x300x 7mm to 350x275x7 thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

S&F powder coated aluminium window/ ventilator fixed type with frames including 5.0 mm thick tinted /frosted glass, standard rubber gasket, aluminium beadings, joining cleat for fixing, locking devices complete all as specified & directed. Make : Jindal/Hindalco or Equivalent

S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F nipple suitable for HDPE water tank (min weight 15mm-38gms)

S&F for Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F for vitreous china WHB size 550 mmx400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including MS brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection 15mm dia 450mm long with CP brass nuts on both sides .

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F for 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S & F for 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F for 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S&F 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified

S&Fplastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour complete all as specified and directed.

S & F of 125/110 mm bore PVC (SWR) 'P' trap complete all as specified and directed

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) including necessary form work complete.

M & L for Granite work (of any type) 25 mm thick (table rubbed and polished) cooking platforms including moulding, cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

S&F for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F for PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

M&L for 75 mm thick PCC type C2, 1:3:6 (40 mm graded stone aggregate) as in plinth portection finishing even & smooth without using extra cement laid in bays with construction joints complete all as spd and as directed

M&L for 150 mm dia reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified.

M&L for concrete bed to drain pipes of 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested;in PCC 1:3:6 type C2 using 40 mm graded stone aggregate concrete all as spd.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening with fixing lugs (hold fast) etc as per specified & drawing complete all as specified and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2010 print) on serial page No. 161 complete all as specified and directed.

S&F for Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white incl spreader (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S&F 10mm thick glass partion for Urinal incl fixing in wall by securing with suitable SS fastner complete all as specified and as directed.

S & F of steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M&L 80mm thick machine pressed colour reflective precast concrete interlocking paver block mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed by Engr-in-Charge. The make and pattern of paver block shall be approved by GE . Note: Payment of sand cushion shall be measured and paid separately.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelling course, roof padding, coping including necessary form work complete all as specified and directed.

M&L two coat of cement base paint over a coat of primer on wall including preparation of newly plastered surfaces.

Removing surplus excavated material (SOIL) to distance exc. 250 m but not exc. 500m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and directed. Make of Cable : Polycab/Havell's/Finolex and Make of PVC conduit : Plaza/Harsh/Kalinga Premium/AKG:-

All as per item No 71 but for one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No 71 but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed.

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

Supply & fixing of 8/9 watt LED lamp complete all as specified and directed.

Supply and fixing double door SPN DBs four way of powder coated, double door DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . Make: Schneider/ Legrand/ L&T / ABB.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens.

Supply and fixing LED lights fitting 1 x 18W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including one no tube 18 watt fixed incl fittings accessories all as specified. Make- Bajaj/Surya/Havells/ Crompton Greaves

Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of su9itable size complete all as specified and ads directed. Make Crompton/Bajaj/Havells

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with blades and frame and louvers and grouting with nut bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper wire upto ceiling rose complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 2 core complete all as specifed and as directed.

S & F stop valve cast copper alloy CP, screwed, 15 mm with iron wheel head, concealed type screwed both ends for iron pipe and fixing for following size:-

25 mm bore

20 mm bore

M & L for tapping/cutting from DI/GI pipe any diameter including suitable size Tee/fittings for 25 mm dia GI pipe complete all as specified as directed.

MS JAGDAMBA ENTERPRISES

J K CONSTRUCTION

PAPPU ROY CONSTRUCTION