Widening and Strengthening of Old G.T. Road Jasoiya More to Ramesh Chowk from Ch 0.00 to 1.80 km and Construction of new RCC Drain on the Level of Road for the year 2025-26 under RCD, Road Division No. 1, Aurangabad

Technical Sheet

Name of Work Widening and Strengthening of Old G.T. Road Jasoiya More to Ramesh Chowk from Ch. 0.00 to 1.80 km and Construction of new RCC Drain on the Level of Road for the year 2025-26 under RCD, Road Division No. 1, Aurangabad

Name of Contractor

B.O.Q. Amount 153543471

Earnest Money 2536000

Cost of BOQ+Bid Processing Fee Rs. 10000 + 5900

Time of Completion in months including non-working period 06 Months

ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Name of Work Widening and Strengthening of Old G.T. Road Jasoiya More to Ramesh Chowk from Ch. 0.00 to 1.80 km and Construction of new RCC Drain on the Level of Road for the year 2025-26 under RCD, Road Division No. 1, Aurangabad Cost of Work as per BOQ(Rs in Lakhs) 0.94399 Time of Completion 06 Months ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount. (A.A) Ref. of Sanction (A.A) Date of Tender 20.04.2026

Sl No. Items Requirement Requirement Cl. No. Name of the contractor

Address of the contractor & Contact No.

1 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days 15.1 Bid validity periods In days

2 Bid Security (A) Indian post office term deposit 1 year/2year/3year; National saving Certificate; Kishan Vikash Patra duly endorsed by the Competent Postal authority in Bihar. 16.1 Amount To be entered (Rs in Lakhs)

(B) Fixed deposit receipt of a Schedule bank, Fixed deposit receipt should be Valid for six months after last date of receipt of tender and shall be pledged in favour of the Executive Engineer, Road Division, -------. Amount To be entered (Rs in Lakhs)

(C) 5 year National Development bond/State development loan certificate. Amount To be entered (Rs in Lakhs)

(D) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement.) Amount To be entered (Rs in Lakhs)

Bid Security Amount - (in lakh) 25.36 Bid Security Amount - Rs.

3 (i) Legal Status of Bidder. 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid Attached or Not 4.2(iv)

4 Total value of civil engineering construction work performed in last five years. 1. Annual Financial Turn Over usually not less than 50% of the estimated annual payments under the contract (Rs in Lakhs) 4.4(A) (a)

2021-22 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.61

2022-23 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.46

2023-24 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.33

2024-25 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.21

2025-26 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.1

Escalation Factor= 1.1

5 Work Experience of Similar nature Satisfactory completed atleast one similar work of value not less than 10% of estimated value of contract (in Lakhs) 4.5(A) (b) Amount To be entered (Rs in Lakhs)

6 Minimum Quantities of work done as prime contractor in any one year during last five years. Items Unit Quantity 4.5A( c)

• Non Bituminous Sub –bases and Bases(GSB, WMM) cum 0.000 Value to be entered in unit cum

• Earthwork in both excavation and embankement (Combined Quantities) cum 0.000 Value to be entered in unit cum

• Bituminous Work (DBM/BM/SDBC/BC/Mastic) cum 1738.99 Value to be entered in unit cum

Concrete Work cum 6192 Value to be entered in unit M

7 Bidding Capacity (In Lacs): More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period. 4.7

(a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

8 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required (For the Project) Nos. Max. Age 4.5(B) (a) Nos./ Max. Age

Front end Loader 1

Smooth Wheeled Roller 2

Vibratory Roller 1

Fully computrized Hot Mix Plant (Minm. 80-100 TPH capasity) with Electronic Controls 1

Paver Finisher with Electronic Sensor 1

Bitumen Sprayer 1 5-7

Tandem Roller 1

Concrete Mixes with integral weigh batching facilty 1

Concrete Batching and mixing plant (Minimum capacity - 15m3/hour) - 5

Paver Finisher for laying WMM material - 5

TOTAL = 13 Nos.

9 Personnel Personnel/Qualification/Contract Package Size (For the Project) 4.5(B) (b) Name of the Personnel and Experince in years

Project Manager/ B.E. Civil + 10 Years Experience (5 years as Manager) or Retired E.E 1

Site Engineer / B.E. Civil + 07 Years Experience (3 years in Road Construction ) or Retired A.E 1

Plant Engineer / B.E. Mech./ Civil + 05 Years Experience or Diploma in Mechanical + 07 Years Experience or Retired J.E 1

Quantity Surveyor / B.E. Civil. + 5 Years Experience or Diploma in Civil + 7 Years Experience -

Soil & Material Engineer / B.E., Civil + 7 Years Experience. -

Survey Engineer / B.E. Civil + 3 Years Exp or Diploma in Civil + 5 Years Experience. -

Site Supervisor - Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. 2

10 Evidence of access to Financial Resources( in Lacs) Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (Not more than 3 months old). 4.2(i) Amount To be entered (Rs in Lakhs)

11 Proposed methodology and programme of construction. the proposed methodology and programme of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones (for all contracts over Rs. 5 Crore) 4.3(l)

12 Litigation History Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. (Attached or not) 4.3(j)

13 Affidavit Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not)

14 Undertaking (A)Regarding statements made in the required attachments are true and correct. (B)Able to invest a minimum of cost upto 25% of contract value of work during implementation of contract. 4.2(ii)

15 Time of Completion To be entered in months

16 Registration No.

17 I.T. & S.T. Registration

18 Affidavit for No Debar

19 Energy License

Executive Engineer RCD, Road Division No. 1, Aurangabad

QUALIFICATION INFORMATION

The information to be filled in by the Bidder in the following pages will be used for purposes of post qualification as provided for in Clause 4 of the Instructions to Bidders. This information will not be incorporated in the Contract.

NAME OF THE CONTRACTOR

1 For Individual Bidders

1.1 Constitution or legal status of Bidder (Attach copy)

Place of registration :

Principal place of business :

Power of attorney of signatory of Bid (Attach)

1.2 Total value of Civil Engineering construction work performed in the last five years** (in Rs. Million)

1.3.1 Work performed as prime contractor, work performed in the past as a nominated sub- contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document, provided further that all other qualification criteria are satisfied (in the same name) on works of a similar nature over the last five years.**

NAME OF THE CONTRACTOR

Project Name Name of the Employer* Description of work Contract No. Value of Contract (Rs. In Crore) Date of issue of work order Stipulated period of completion Actual date of completion* Remarks explaining reasons for delay & work completed)

* Attach certificate(s) from the Engineer(s)-in-Charge

** Immediately preceding the financial year in which bids are received.

 Attach certificate from Chartered Accountant.

1.3.2 Quantities of work executed as prime contractor, work performed in the past as a nominated sub-contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document, provided further that all other qualification criteria are satisfied (in the same name and style) in the last five years :**

NAME OF THE CONTRACTOR

Year Name of the work Name of the Employer* Quantity of work performed (cum) @ Remarks

Cement Concrete (including RCC & PCC) Masonry Earth works GSB WMM Bituminous Work Mastic Asphalt Remarks* (indicate contract Ref)

1.4 Information on Bid Capacity (works for which bids have been submitted and works which are yet to be completed) as on the date of this bid.

(A) Existing commitments and on-going works:

NAME OF THE CONTRACTOR

Description of works Place & State Contract No. Name & Address of Employer Value of Contract (Rs Cr) Stipulated Period of Completion Value of works* remaining to be completed (Rs Cr) Anticipated date of completion

* Attach certificate(s) from the Engineer(s)-in-Charge

The item of work for which data is requested should tally with that specified in ITB clause 4.5A ©

** Immediately preceding the financial year in which bids are received.

# Delete, if prequalification has been carried out.

(B) Works for which bids already submitted :

Description of works Place & State Name & Address of Employer Estimated value of works (Rs Cr) Stipulated period of completion Date when decision is expected Remarks, if any

1.5 Availability of key items of Contractor’s Equipment essential for carrying out the Works [Ref. Clause 4.5(B)(a)]. The Bidder should list all the information requested below. Refer also to Sub Clause 4.3 (d) of the Instruction to Bidders.

NAME OF THE CONTRACTOR

Description of works Requirement Availability proposals Remarks (from whom to be purchased)

No. Capacity Owned/Leased to be procured Nos./Capacity Age/ Condition

1.6 Qualifications and experience of key personnel required for administration and execution of the Contract [Ref. Clause 4.5(B)(b)]. Attach biographical data. Refer also to Sub Clause 4.3 (e) of instructions to Bidders and Sub Clause 9.1 of the Conditions of Contract.

NAME OF THE CONTRACTOR

Position Name Qualification Year of Experience (General) Years of experience in the proposed position

1.7 Proposed sub-contracts and firms involved. [Refer ITB Clause 4.3(k)]

NAME OF THE CONTRACTOR

Sanction of the works Value of Sub-contract Sub-contractor (Name & Address) Experience in similar work

Attach copies of certificates on possession of valid license for executing water supply/ sanitary work/ building electrification works [Reference Clause 4.5(d) & Clause 4.5(e)]

*1.8 Financial reports for the last five years: balance sheets, profit and loss statements, auditors' reports (in case of companies/corporation), etc. List them below and attach copies.

1.9 Evidence of access to financial resources to meet the qualification requirements: cash in hand, lines of credit, etc. List them below and attach copies of support documents.

1.10 Name, address and telephone, telex and fax numbers of the Bidders' bankers who may provide references if contacted by the Employer.

1.11Information on litigation history in which the Bidder is involved.

NAME OF THE CONTRACTOR

Other Party(ies) Employer Cause of Dispute Amount involved Remarks showing Present Status

1.12 Statement of compliance under the requirements of Sub Clause 3.2 of the instructions to Bidders. (Name of Consultant engaged for project preparation is ** ........................ …………….............................)

Proposed work method and schedule. The Bidder should attach descriptions, drawings and charts as necessary to comply with the requirements of the Bidding documents. [Refer ITB Clause 4.1 & 4.3(1)]

1.15 Quality Assurance Programme

2 Additional Requirements

2.1 Bidders should provide any additional information required to fulfill the requirements of Clause 4 of the Instructions to the Bidders, if applicable.

(ii) Undertaking

*** (iii) Update of original prequalification application

*** (iv) Copy of original prequalification application

*** (v) Copy of prequalification letter

* Delete, if prequalification has been carried out.

** Fill the Name of Consultant.

*** Delete, if prequalification has not been carried out.

Check List for Submission Of Tender

Evaluation will be done as per the information provided in the document attached with tender. Bidder may disqualified, if documents are not attached properly.

Name of the Bidder

Sl. No. Checklist Items (Attach Documents in Link Name As Given in Adjacent coloumn in Edit Attachment Folder) Link Name in Edit Attachment Document attached

1 BID SECURITY PHOTO COPY BID SECURITY PC

2 LAST 5 YEARS ANNUAL TURN OVER ANNUAL TURN OVER

3 EXPERIENCE Of SIMILAR NATURE Of W0RKS EXP SIM NAT

4 QUANTITY OF WORK (RCC/PCC, EARTH WORK, GSB/WBM/WMM,BM/SDBC,etc) EXECUTED DURING LAST 5 YEARS) WORK EXE QTY

5 BALANCE VALUE OF ON GOING WORKS BAL VAL WORKS

6 EXISTING COMMITMENTS EXIST COMT

7 BANKER'S CERTIFICATE FOR ACCESS OF FINACIAL RESOURCES BANK CER

8 AFFIDAVIT AFFIDAVIT

9 UNDERTAKING UNDERTAKING

10 LITIGATION HISTORY LIT HIS

11 PLANT and MACHINARIES PT & MAC

12 KEY PERSONNEL KEY PER

13 Registration REGISTRATION

14 Power of Attoney POW AT

15 Legal Status Of Bidder LEGAL

16 PROGRAMME Of CONSTRUCTION PROG CONS

17 LABOUR LICENSE LAB LIC

18 CHARACTER CERTIFICATE CHAR CER

19 ST REGISTRATION and CLEARANCE CERTIFICATE ST CLEARANCE

20 NOC FOR DEBAR DEBAR

21 Energy Licesnse Energy License

IF YOU HAVE NOT BEEN DEBARED WRITE "NOT APPLICABLE" IN YOUR LETTER HEAD SCAN AND UPLOAD IN THE IN NOC FOR DEBAR LINK

Note:-Attachment should be self attested and should be attached as per above instruction, otherwise it may be rejected.

I, the undersigned, do hereby certify that all the statements made in the required attachments are true and correct.

Signature & Seal of the Bidder

OFFICE OF THE EXECUTIVE ENGINEER R.C.D. ROAD DIVISION NO-1, AURANGABAD.

Bill of Quantity for Widening and Strengthening of Old G.T. Road Jasoiya More to Ramesh Chowk from Ch. 0.00 to 1.80 km and Construction of new RCC Drain on the Level of Road for the year 2025-26 under RCD, Road Division No. 1, Aurangabad

1 Estimated Cost Rs.

2 Deposit of E/M Rs. 2536000

3 Cost of BOQ Rs. 10000

4 Bid Processing Fee Rs. 5900

5 Time of Completion 06 Months

Sl. No. S.O.R Name of work Unit Quanity Rate Amount

1 2.03 (i) A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (By Manual Means) Hect. 0.046875

2 2.04 (i) I B I. Dismantling of Structures: Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials and stacking of serviceable material with all lifts and lead of 1000 metres. By Manual Means for Cement Concrete Grade M-15 & M-20. Cum 432

3 2.04 (ii) B (i) II .Dismantling Brick/Tile Work: Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m. Dismantling Brick/ Tile Work in Cement Mortar (By Manual). Cum 216 ###0.00;###0.00 262634

4 2.04 (i) II B Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres. By Mechanical Means Prestressed / reinforced cement concrete grade M-20 & above Cum 3222

5 2.05 (ii) A Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. (a) Bituminous coarse By Mechanical Means Cum 571.21 ###0.99;###0.99 292631

6 Construction of sub-grade and earthen shoulders. Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. By Vibratory roller Cum 234.38

7 Construction of Embankment with Material Obtained from Borrow Pits .Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. By Vibratory roller. Cum 703.115

8 4.01 B (ii) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (i) For Grading II Material Cum 1150.165

9 4.14 B Wet Mix Macadam :-- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared surface and compacting with vibratory roller to achieve the desire density. Cum 1987.36

10 5.01 A (i) Prime Coat:- Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Sqm 9983.02

11 5.02 (i) Tack Coat : - Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. Sqm 27582.45

12 5.13 B (ii) Recycling of Bituminous Pavement with Central Recycling Plant Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 percent of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required , mixing in a hot mix plant, transporting and laying at site and compacting tothe required the grade , level and the thickness, all as specified in clause 519. Using by Dense Graded bituminous macadam Cum ###0.999;###0.999 11344.85

13 5.05 B Bituminous concrete Grading- II (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.) Cum 551.65

14 Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10sqm and at an approximate spacing of 10cm center to center in both directions, pressed into surface when the temperature of surfaces is not less tha 1000c, protruding 1mm to 4mm over mastic surface, all complete as per clause 516. Sqm 6120

15 8.04 (viii) Speed limit Signs (600 Circulars) Nos 15

16 8.04 (x) Direction Signs /Place & Identification Signs / Amenity ahead Signs (800 x 600) Nos 14

17 (Road Marking with Hot Applied Thermoplastic Compound with Refectorising Glass Beads on Btuminous Surfaces) Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Sqm 2495

18 8.15 (a) Supplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.) Nos 30

19 8.35 (a) Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. Nos 2200

20 12.01 (I) B (i) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (in Ordinary soil by Mechanical Means depth up to 3 M) Cum 10944

21 12.08 A Case-II Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 (Using Bathing Plant & Manual Placing) Cum 576

22 12.08 G CASE -I Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30, (Using Bathing Plant ,Transit Mixer & Concrete Pump) Cum 5616

23 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Spec. MT 606.59 ###0.00;###0.00 41912985

24 Providing weep holes in Abutments, wing walls, Retaining, Return walls etc with 100 mm dia A.G. pipe, collar, M.S. clamps including cost of all materials and labour all complete job as per drawings and Technical Specifications Clause 2706 NO 3600

Total Construction Cost (A)

Add Labour Cess @ 1% (B)

Add Seigniorage fee (C.) 1131565

Add GST @ 18 % (18% *(A+B+C))

Permissible limit.

1 Amount for Bid :-

2 Name of the Contractor :-

3 Address of the Contractor :-

4 I/we offer in Figures in words………………………………... % (Percentage) High / Less/BOQ rate as mentioned in the Bill of quantity. IN FIG. AS PER RATE

5 IN WORDS AS PER RATE

Exective Engineer, RCD Road Division No. 1, Aurangabad

Note: The format/content of the documents shall not be modified. If modified bidder/contractors are laible for disqualification.