REPAIR TO ALL TYPE OF WOODEN AND STEEL FURNITURE FOR HATTIGARH, TAMULPUR AND DARRANGA MILITARY STATION UNDER GE RANGIA

Amount

S&F plywood commercial 1830mm x 920mm x 12mm on bed ply top (as per drawing No. FD-246) after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

Head board panel

Foot board panel

Long rail

Stiffener

M & L for taking down old unserviceable front legs of size 460x 55X30mm (as per drg No. FD-279) of chair dining and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be french polished to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

Rear legs of size 890x55x30mm.

Front/ Back/ Side rails of size as per drg No. FD-279.

Back rest of size 440x45x15 mm.

Leg stiffeners of size 420x20x25 mm.

S&F of Seat of Foam with back (as per drawing No. FD-78M) after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

Short rail

Long rail

Stiffner

Vertical stiffner

PVC Shoe

S&F in replacement of 100mm thick cushion of cool foam of 40 density covered with best quality tapertry cloth duly stiched and cushion cover made out of best quality cloth one side zip as approved by GE, size 530mm x 500mm for sofa set of five complete (as per drawing No. FD-281) complete all as specified and as directed by Engineer-in-charge. Make : Kurl-on/Sleepwell/reliance

Wooden batten

Bearer

S&F Top of table dining for six persons(as per Drg No. FD-239/FD-273) of size 1500mm x 900mm x 19mm thick plywood 18mm with 1.5mm thick plastic laminated sheet, laminated sheet fixed over it with fevicol 4mm thick teak wood edging provided all around the top after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

Short rail

Long rail

S&F in-repair of L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw

Taking down old unserviceable plywood from charpoy MS tubing Ply top supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy MS Tubing with nut, bolt, washer as per drawing complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking out existing broken head board from charpoy and fixing new head board with 18 mm thick exterior grade prelaminated particle board both side laminated shade as approved by BSO/GE with 4 mm thick teak wood beading in matching shade with new screws, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking out existing broken foot board from charpoy and fixing new foot board with 18 mm thick exterior grade prelaminated particle board both side laminated shade as approved by BSO/GE with 4 mm thick teak wood beading in matvching shade with new screws, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Hard rubber shoes, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking down old unserviceable plywood from charpoy GI pipe Ply top and Supply and fixing of ply wood 6'-6" x 3' x 12mm thick on charpoy GI pipe ply top with nut, bolt, washer and flat iron 150 x 50 x 5 mm thick 03 Nos as per drawing No FD-220 complete all as specified and as directed by Engineer-in-charge.

Taking down old unserviceable long rail of GI charpoy and provision of new GI pipe 32 mm dia, medium grade ISI marked long rail duly threaded 40mm at one end 22mm at other end and fixing complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge. Make: Jindal / TATA / Surya.

M&L for cutting existing unserviceable long rail retrieved from item No 133 above and converting into short rails as per existing pattern/design duly threaded 22mm at both ends and fixing the same after taking out old unserviceable short rail complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

M&L for cutting existing unserviceable short rail retrieved from item No 134 above and converting into legs all as per existing pattern/design and drawing duly threaded 22mm at one end and at other end 3mm thick plate, two Nos of 25mm dia and 40mm long ring made out of 5mm thick MS flat iron for MNF Set duly welded shall be provided and fixing the same after taking down unserviceable legs complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable three way elbow from the GI charpoy & provision of new three-way elbow 32mm dia. ISI marked and fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable check nuts from the GI Charpoy and provision of new GI check nuts 8 mm wide, 32mm dia ISI marked fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable nylon newar from GI charpoys, tightening the frame in original shape. supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy GI pipe with nut, bolt, washer and flat iron 150 x 50 x 5mm thick 06 Nos including 12 mm thick half round teak wood edging all around the ply wood top finished with french polish complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

S&F CP handles for locker bed side steel with shelves (as per drawing No. FD-257 & 1029) after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

3mm thick stainless steel hasp and staple as per drawing.

Leg as per drawing.

Repairs to dented door by removing the door from hinges making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah medium steel with shelves (as per drawing No. FD-243/FD-1032) after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Three way locking device.

CP locking handles 125mm for almerah.

Shelves for almerah.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah large steel with shelves (as per drawing No.- FD-1031) after taking out old one carefully and fixing at original positing including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Three way locking device.

CP locking handle 125 mm for Almerah.

Shelves for almirah.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

S&F table top as per drawing No. FD-1008 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around for table steel without drawer of size 900 x 600 x 760 mm after after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Short rail

Long rail

Leg stiffner

S&F table top as per drawing No. FD-1008 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around for table steel with drawer of size 900 x 600 x 760 mm after after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Short rail

Long rail

Leg stiffner

Drawer

M&L for taking down old unserviceable top from Peg Table (as per Drg No. FD-384) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

Long rails

Short rails

Stiffners

M&L for taking down old unserviceable top from Teapoy wooden (as per Drg No. FD-278) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

Long rails

Short rails

Stiffners

S&F Top of table writing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round size 1145mm x 600mmx19mm as per drawing No. FD-33, 275 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

Long rails

Short rails

Stiffners

Drawer

Shutter with hinges

Brass lock as per existing

S&F in-repair of MS angle iron (ISA) of 40x40x4mm for Trestle store room steel as per drg no.- FD-1043

All as per serial item No. 89 above but for MS Flat iron of 50x50x6mm

S&F Mirror 5.5 mm thick 366mmx1220mm with teak wood frame size to table dressing gents as per drawing No. FD-230 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge. Make:- Saint Gobain / Modiguard / Asahi India Glass Limited.

All as per serial item No. 91 above but for top & bottom made out of 12mm thick pre-laminated particle board ext grade.

All as per serial item No. 91 above but for back made out of 6mm thick plywood commercial BWR with kew plates.

All as per serial item No. 91 above but for drawers.

S&F Arm of Chair CBA Steel (FD-386) after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Stiffner

PVC Shoes

Re-canning to chairs of following types with cane plastic 2mm and 4mm half round premier make of white color on both seat and back as per godrej patern all as specified shown on drawing Nos. FD-279, 280, 229 & 256 complete all as specified and as directed by Engineer-in-charge. (a) Chair writing (b) Chair dining (c) Chair easy (d) Chair varandha

M&L for table top of table steel 900 x 900 x 760 mm without drawer as per drawing No. FD-1009 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Side rails of size as per drg No. FD-1009.

Legs made out of MS square tube of size 25x25x16 gauge.

S&F in repair PVC shoes of best quality for table steel of size 900 x 600 x 760 mm without drawer as per drawing No. FD-1009 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Repairing of shelf of Book case Steel (FD-1028) by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

S&F in-repair of shelf of Book case Steel (FD-1028) by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

S&F in-repair of 6mm thick sheet glass of 780x280mm with cleats

S&F in-repair of brass lock as per existing of shelf of Book case Steel (FD-1028)

S&F table top 1200 x 610 mm office clerk steel as per drawing No. FD-1004 made out of 19mm thick prelaminated particle board exterior grade one side teak and other side white with teak wood edging 19 x 4 mm thick edging all around table top after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Long rails

Short rails

Leg Stiffners

Drawer

Brass lock as per existing

M&L for two coats of French polish to old polished wooden furniture including cleaning and preparation of old surfaces of bed plywood top as per drawing No. FD-246, complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 116 above but for chair dining as per drawing No. FD-279.

All as per serial item No. 116 above but for Foam with back as per drawing No. FD-78M.

All as per serial item No. 116 above but for sofa set 5 seater as per drawing No. FD-281.

All as per serial item No.116 above but for Table dining 6/8 persons/JCOs (as per Drg No. FD-239/FD-273).

All as per serial item No. 116 above but for peg table as per drawing No. FD-384.

All as per serial item No. 116 above but for teapoy wooden as per drawing No. FD-278.

All as per serial item No. 116 above but for table writting wooden as per drawing No. FD-275.

All as per serial item No. 116 above but for table dressing gents with mirror as per drawing No. FD-230.

M&L for preparation of old painted surface almirah large steel (as per drawing No. FD-339, 1031) with shelves and applying two coats of synthetic enamel paint by spray machine (bush green & white) colour to the outside surface and internal surfaces complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 125 above but for Almirah medium steel with shelves as per drawing No. FD-243, FD-1032.

All as per serial item No. 125 above but for Charpoy MS tubing with ply top as per drawing No. CWE/Tez/04.

All as per serial item No. 125 above but for Locker bed side steel as per drawing No. FD-257,FD-1029.

All as per serial item No. 125 above but for table steel without drawer 900 x 600 x 760 mm as per drawing No. FD-1008.

All as per serial item No. 125 above but for table steel with drawer 900 x 600 x 760 mm as per drawing No. FD-1008.

All as per serial item No. 125 above but for trestle store room steel as per drawing No. FD-1043.

All as per serial item No. 125 above but for Chair CBA Steel as per drawing No. FD-386.

All as per serial item No. 125 above but for table steel 900 x 900 x 760 mm as per drawing No. FD-1009.

All as per serial item No. 125 above but for Book case steel as per drawing No. FD-1028.

All as per serial item No. 125 above but for Table ofice clk steel as per drawing No. FD-1004.

RK STEEL FABRICATORs