Renovation of Type-I Quarter, 2 unit, (I-Block) of DSS to transit accomodation at Aerial Bay in Diglipur.

Amount

Dismantling of AC Sheet roofing including ridges, hips valleys and gutters etc., conveying and stacking the AC sheets in the store yard with in a lead of 500m including removing L hooks washers etc complete. The rate is inclusive of GST and all consumable items.

Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, holdfasts etc. complete and stacking within 500 metres lead. The rate is inclusive of GST and all consumable items.

Dismantling of cement concrete 1:2:4 or richer mix including disposal of all dismatled materials within in a lead of 500m as directed by EIC all labour charges, minor tools etc complete. The rate is inclusive of GST and all consumable items.

Earth work excavation in foundation trenches in saturated soil for column and plinth etc. in all type of soil with a lead upto 100 Mtr. and lift upto 1.50 Mtr. including stacking the excavated earth not more than 3 Mtr. from the edge of excavation and then returning the stacked soil in 15 cm layers when required in plinths and sides of the foundation, etc. including cost of all labour charges, minor tools, etc. complete. The rate is inclusive of GST and all consumable items.

Supplying and filling in plinth with crushed stone sand under floors including, watering, ramming consoldating and dressing etc. including cost of crushed stone sand from local quarry at Diglipur, all labour charges, minor tools, transportation charges of all material to worksite, GST, labour welfare cess etc., complete.

Providing and laying cement concrete 1:3:6 (one cement, three pulverized stone sand and six stone metal of 40mm size) below footing, plinth beam as directed by the EIC, screening & washing of both the aggregates, mixing, placing, curing including cost of cement OPC Gr43, nominal centering & shuttering charges, cost of pulverized stone sand & stone metal from local quarry at Diglipur, GST, labour welfare cess etc. complete.

Providing and laying CC 1:2:4 with 20mm size stone chips (one cement, pulverized stone sand, & four stone chips of size 2cm graded) in all CC works as directed by the EIC, including screening & washing of both the aggregates, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator, curing including cost of cement OPC Gr43, stone chips 20mm nominal & pulverized stone sand from local quarry at Diglipur, all labour charges, transportation charges of all materials to work site, cost of minor tools, hire charges of mixer machine and vibrator, GST, labour welfare cess etc complete.

Providing and laying R.C.C 1:1.5:3 with 20mm size stone chips (one cement, one and half mainland river sand & three stone chips of size 2cm graded) in all RCC works as directed by the EIC, including screening & washing of both the aggregates, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator, curing including cost of cement OPC Gr43, stone chips 20mm nominal from from local quarry at Diglipur & mainland river sand, all labour charges, transportation charges of all materials to work site, cost of minor tools, hire charges of mixer machine and vibrator, GST, labour welfare cess etc complete.

Providing and fixing Tor steel reinforcement for R.C.C. work including cutting, bending, binding and placing in position etc., as per the direction of EIC, including cost of steel Fe500D, binding wire, all labour charges, transportation charges and minor tools, GST, labour welfare cess etc. complete.

Providing form work including centering & shuttering so as to give a rough finish, strutting and propping etc. and removal of the same from reinforced cement concrete and plain concrete work as directed by the Engineer In Charge, including cost of centering and shuttering, all labour charges, cost of binding materials, cost of transportation charges of all materials to work site, cost of ballies and cost of minor tools, GST, labour welfare cess etc. complete.

Providing and fixing 20 cm thick masonary with Hollow Block of size 0.40 x 0.20 x 0.20 Mtrs cast with cement concrete 1:3:6 (1 cement three quarry dust and six 11.2mm stone chips) including curing, fixing with cement mortar 1:4 (one cement & four crushed sand) in walls, including cost of cement OPC GR43, crushed stone sand from local quarry at Diglipur, all labour charges for making hollow blocks, curing, conveying and fixing the same, cost of wooden pallets, hire charges of hollow block making machine, transportation charges of all materials to work site, scaffolding charges and cost of minor tools, GST, labour welfare cess etc., complete.

Plastering with cement mortar in 12 mm thick with 1:4 (one cement four mainland river sand) cement mortar as directed by the EIC, including cost of cement, mainland river sand, all labour charges, transportation charges of all materials to work site, scaffolding charges, cost of minor tools and plants, GST, labour welfare cess etc. complete.

Providing wood work (Superior Harwood Category II) in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position, all labour charges, transportation charges of all materials to work site, scaffolding charges, cost of minor tools and plants, GST, labour welfare cess etc. complete.

Providing and fixing pannaled or panneled and glazed shutters for doors, windows and clestory windows (Area of opening for pannel inserts excluding portions inside grooves or rebates to be measured).Pannelled or pannelled and glazed shutters 25mm to 40mm thick including cost of timber, all labour charges, minor tools, GST, labour welfare cess etc., complete.

Providing and fixing solid PVC panelled door of ISI mark of approved brand with 3mm thick and frame provided with 5mm thick PVC, including cost of all materials, all fittings, all labour charges, transportation charges and minor tools, GST, labour welfare cess etc. complete.

Providing and fixing Aluminium Handle 100 mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws, GST, labour welfare cess etc. complete.

Providing and fixing Aluminium tower bolt ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws including cost of all fittings, labour charges, minor tools, GST, labour welfare cess etc. complete.

Providing and fixing sliding door bolt Aluminium ISI marked anodized (AC 10 as per IS 1868) transparent or dyed to required colour shade with nuts and screws etc. complete including cost of all materials, all labour charges minor tools, GST, labour welfare cess etc. complete.

Fabrication of tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate primer, welded and bolted providing special shaped washers including cost of MS pipe heavy duty, welding rod, hire charges of welding machine, all labour charges zinc chromate primer, transportation charges, minor tools, GST, labour welfare cess etc., complete.

Providing and fixing 6mm thick design Occanic sheet ceiling of everest or equivalent make of size 610mm x 610 mm etc in the alluminium framed ceiling (frame work to be paid separetely) including cost of occianic sheet, all labour charges transportation charges, minor tools, GST, labour welfare cess etc. complete.

Providing and fixing anodised aluminium work ( with minium 15 micron uniform anodic coating ) consisting of tee/angle section , of approved make conforming to IS;733 in frames of false ceiling including aluminium angle, cleats with necessary C.P.brass/stainless steel sunk screws aluminium perimetre angles fixed to wall with rawl plugs @ 450mm center to center and fixing the frame work to level adjusting angles (6mm dia M.S rods) with necessay cadminum plated machine screws all complete as per approved arichitectural drawings and direction of the EIC (level adjusting angles , ceiling cleats and expension hold fastner to be paid for separately) including cost of aluminum extrudes and fittings, all labour charges transportation charges, minor tools, GST, labour welfare cess etc. complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer -in-charge)0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on botyh side of the sheet and polyster top coat 15-18 microns.sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surface ,excluding the cost of purlins,rafters and trusses and including cutting to size and shape whereever required,including cost all labour charges, minor tools,transportation charges, scaffolding charges, labour welfare cess,GST etc.complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+0.05%) total coated thickness,zinc coating 120 grams per sqm as per IS:277 240 mpa steel grade ,5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling/self tapping screws complete ,including cost all labour charges, minor tools,transportation charges,scaffolding charges,labour welfare cess, GST etc.complete.

Providing and fixing of eaves or facia board with Everst Heavy Duty Board / Endura Board or equivalent (Non - Asbestors fiber cement board) of 12 mm thick 30 cm wide etc., as per the direction of EIC, including cost of board, nails / screws, GST, labour welfare cess etc., complete.

Providing and fixing anodised aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws of with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and skles with required PVC / neoprene felt etc.. aluminimum sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminumum strap beading for glazing / pannelling, CP brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Galzing and panneling to be paid for separately for Fixed Portion), including cost of all materials, transportation charges, all labour charges and minor tools, GST, labour welfare cess etc., complete.

Providing and fixing glazing in aluminium door, window ventilator, shutters and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings and the direction of EIC (cost of aluminium snap beading shall be paid in basic item). With glass panes of 5 mm thickness (weight not less than 10.00 Kg/Sqm). including cost of all materials, all labour charges, transportation charges of all materials to work site and minor tools, GST, labour welfare cess etc. complete.

Providing and fixing Ist quality Vitreous Floor tiles (600 x 600 mm, thickness to be specified by the manufacturer) of approved make like laid on 20mmm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigmet, including cost of cement, river sand from mainland , vitreous floor tiles all transportation cost upto site , labour charges minor tools, GST, labour welfare cess etc. complete.

Providing and fixing Ist quality Vitreous wall tiles (200 x 300 mm), thickness to be specified by the manufacturer) of approved make like laid on 20mmm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigmet including cost cement, river sand from mainland , vitreous wall tiles all transportation cost upto site , labour charges minor tools, GST, labour welfare cess etc. complete.

Making plinth protection 75 mm thick of cement concrete 1:3:6 (1 cement, 3 Pulverised stone sand, 6 graded stone aggregate 40 mm nominal size) including the cost of cement pulverised stone sand, stone aggregate from mainland quarry, finishing the top smooth & finished with neat cement @ 9.76 kgs per 10.00 Sqm. The rate is inclusive of GST and all consumable items.

Finishing with EPOXY paint (two coats ) at all locations prepared and applied as per manufactures specifications including appropriate priming coat, including preparation of surface, cleaning,scraping of the existing painted surface,cost of paint,brushes,transportations charges, scaffolding arrangements ,all labour charges, minor tools,labour welfare cess, GST etc complete (concrete Work)

Distempering one coat with cement primer and two coat with oil bound washable distember of approved brand and manufacture to give an even shade over new cement surface including cost of cement primer, distember, brushes, transportations charges, scaffolding arrangements, all labour charges, minor tools,labour welfare cess, GST etc complete. (New Work)

Two coats of new work painting with synthetic enamel colour paint Ist quality of approved brand by EIC(Ultimate/All guard/Asian/Nerolac/Berger) or equivalent over steel surface , including cost of all materials like paint brushes, transportation charges of all materials to work site, all labour charges and minor tools, GST, labour welfare cess etc. complete.

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade including cost of ready mixed paint, brushes, transportations charges, scaffolding arrangements ,all labour charges, minor tools,labour welfare cess, GST etc complete.(Two coat)

Providing and fixing wash basin with single hole pillow tap with C.I. or M.S. Brackets of approved make like Jaguar or equivalent make, of ISI quality including cost of all other materials, all labour charges minor tools etc. transportation charges of all materials to work site,GST, labour welfare cess etc. complete. Jaguar or equivalent Flat back wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps.

Providing and fixing 1000 Lit capacity HDPE water storage tank (3 layered) at the roof level of the building cost of the tank and brackets, cost of tank and brackets, cost of all other materials, all labour charges for installation of minor tools, transportation charges of all fittings, all labour charges minor tools, GST, labour welfare cess etc. complete.

Providing and fixing on wall face unplasticised, PVC pipe of ISI mark conforming to IS 4985(working pressure 4 kgf per sqcm) from WC to inspection chamber including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion as per the directions of EIC, including cost of PVC pipe all labour charges minor tools, GST, labour welfare cess etc. complete. (110mm Dia)

Providing and laying G I pipe for external and internal water supply with all GI fittings (such as GI socket, GI Nipple, GI Elbow , GI bend , GI Tee, reducer, big cock & all other accessories) including cost of GI pipe and fittings, all labour charges, trasportation charges and minor tools, GST, labour welfare cess etc. complete (concealed in wall). (All fittings to Jaguar or equivalent make of ISI quality.)

GI pipe - 25mm dia

Gi Pipe -15mm dia

Providing and fixing stainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, transportation charges of materials to work site, all labour charges, minor tools, Labour welfare cess, GST etc, complete. Kitchen sink with drain board. Size 510x1040 bowl depth 178 mm.

Providing and fixing brass gate valve with CI wheel of approved quality (screwed end), including Labour welfare cess, GST etc, complete. 25 mm nominal bore.

Providing and fixing brass bib cock of approved quality, including Labour welfare cess, GST etc, complete.. 15 mm nominal bore.

VISHAL GORAI