Construction of Material Recovery Facilities Center at Tharuvaikulam Compost yard

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and M-Sand, silt or other loose soil, wet Sand,or silt not under water, light black cotton soil, Sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Plain Cement Concrete 1:5:10 (one cement, five fine aggregates and ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

For footing and grade beam

For rectangular Columns

For Lintel Roof Slab & beam

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 3250Kg/ 10cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of M-M-Sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Upto basement

For ground floor

Brickwork in CM1:5 (one cement & Five Crushed StoneSand(M-Sand))usingIIclassgroundmouldedbricks of size 9" X 43/8"X 2 3/4" includingfinishing,curing, etc., complete complying with standard specification

Foundation and beasement

For Ground Floor

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Providinggranolithicfloor finishof 25mmthicknesswithplaincement concrete1:2:4 (OneCement, Two crushedsand (MSand)andFouraggregate) using10to 12mm gauge hard broken stone jelly includinglaying, finishingandthetoprubbedsmoothwithpowertrawl, thread lining, curing etc. complete complyingwith standard specification and as directed by thedepartmental officers. (The rate is inclusive ofnecessaryplanking for panelling wherever necessaryand as directed by the departmental officers)

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar (1:4) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Paving the floor with Vitrified Marbonite tiles of stain free nano polish approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three M-Sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two M-Sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Solid Core Flush Door with teakply on both side with teakwook lipping alround 35mm thick Labour wrought and put up in position Shutters for fully panelled doors internal five plywood panels including labour charges for fixing furniture fittings complying with standard drawings and standard specification.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter Solid panel PVC door with frame

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (SOR 2024-25 (VOL 1 with Index (PWD-HD-WRD) (1) Unique Code M-0402 Pg-82)

Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Fabricating supplying and fixing of Weld mesh of size 7.5x5.0cm 10Gauge . The Mesh to be fixed with making suitable Painting,cutting the Mesh in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting Two Coat with Ready Mixed Enamel Paint over the new Iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

20mm dia PVC Pipe

25mm dia PVC Pipe

110mm dia PVC Pipe

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary the rate includes all cost and conveyence of materials and labour charges etc., complete

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with M-Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of M-Sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supply and delivery and fixing of 1000 lit HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labourcharges for fixing of the GI pipes and specials for pipe connection works includingcutting, threading and fixing charges etc.,

Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (forelectronicregulator) (5 points per coil)

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box inflush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point

Wiring with 2x4sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . the rate includes all cost and conveyence of materials and labour charges etc., complete

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 15W CFL lamp with CFL.

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18")

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2"x1-1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63A fuse units (500V), 1No. neutral link, copper earth flat of size 1"x1/4" with inter connection of EB metert to fuse units by 16Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing

Supply and run of 4x6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains

Receiving Conveyors (1 set - 2 nos) Supply, fabrication, erection & commissioning of receiving Conveyors (1 set - 1 flat & 1 inclined) to receive the garbage from the receiving platform. Capacity: 5 MT per hour, Length of the conveyor- 3 meter, with 5 HP motor or more and gearbox. Width of belt- 1 meter, 3 ply, 3 mm thick rubberized. Placed below (ground level of 0.5 meter with flat roller conveyor suitably placed on rollers with drives. The inclination conveyor to transfer the material from the flat conveyor to manual segregation conveyor with necessary supports and steel frame. Length of the conveyor 3 m and width of belt- 1 meter, 3 ply, 3 mm thick rubberized with 5 HP motor or more with suitable gearbox.Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the Date central panel board and starter.. It is driven by electric motor and gear box. Motor make:Kirloskar/ABB/Crompton Greaves, Gear Boxes:Shanthi Gears/Premium.Electrical tems:Schneider/Legrand/ABB/L&T/Polycab/Crompton. Structural Steels shall belS226grade.MS plates shall be IS.2062 grade B.

Trommel Supply, fabrication, erection & commissioning of Heavy Duty Trommel suitable for input capacity of 10 MT per hour with 40 MM Holes, Rotary type, with 10 HP Motor & Gear Box, Length 5 Mtrs, Ø 1.5 Meter or higher. 8mm thick MS plate. Internal MS guiding blades with 100 mm length, 8 mm thickness and 150 mm spacing. Height from the ground is 3.5 meters at bottom. Air blowing arrangement shall be provided for efficient Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make:Kirloskar/ABB/Crompton Greaves, Gear Boxes:Shanthi Gears/Premium.ElectricalItems:Schneider/ Legrand/ ABB/ L&T/ Polycab/ Crompton.Structural Steels shall belS226 belS.2062gradeB. grade.MS plates shall be IS.2062gradeB.

Trommel Reject Conveyor Supply, fabrication, erection & commissioning of Trommel Reject Conveyor Capacity: 5 MT per hour, Length- 9 meter with 5 HP motor and gearbox. Width of belt- 1.0 meter, 3 ply, 3 mm thick rubberized. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make:Kirloskar/ABB/Crompton Greaves, Gear Boxes:Shanthi Gears/Premium.Electrical Items:Schneider/ Legrand/ ABB/ L&T/ Polycab/ Crompton.Structural Steels shall be IS226 grade.MS plates shall be IS.2062 grade B.

Manual Segregation Conveyor Supply, fabrication, erection & commissioning manual segregation Conveyors to segregate the larger material from the garbage manually. Capacity: 10 MT per hour, Length- 30 meter, width of belt - 1.0 meter& 3 ply, 8 mm thick rubberized with 5 HP motor or more and gearbox. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make:Kirloskar/ABB/Crompton Greaves, Gear Boxes:Shanthi Gears/Premium.Electrical Items:Schneider/Legrand/ABB/L&T/Polycab/Crompton. M24cover grade.Structural Steels shall be IS226 grade.MS plates shall be IS.2062 grade B.

Plastic Pulveriser- Heavy Duty Design, Fabrication, Supply, Erection, and Commissioning of Bio degradable shredder machine having a output capacity of 3 tons per hour. The motor for operating machine should have 20.0 HP, 3 Phase, 1440 RPM, ISI reputed motor and Input throat Size of 1000mm length for efficient cutting of Bio degradable waste, having the rotor drum of 600mm fitted with hardened cutting blade with suitable angle matching or its equivalent as per the standard including all cost and conveyance of all materials and Erection. It is driven by electric motor and gear box. Motor make:Kirloskar/ABB/Crompton Greaves, Gear Boxes:Shanthi Gears/Premium.Electrical Items:Schneider/ Legrand/ ABB/ L&T/ Polycab/ Crompton..Structural Steels shall beIS226 grade.MS plates shall beIS.2062 grade B.

vivek vijay and company (BID ID -1186227)

LOTUS CONSTRUCTION (BID ID -1186136)