Additional Improvement works to the Newly Constructed Shelter for Homeless (SUH) at NTP street in ward no.89 South Zone.

Supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and BG 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed

For Lintel

For Vertical Wall

For Slab

Cement Concrete 1:1.5:3 (one cement,One and Half sand and Three aggregate)using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete

Supplying,fixing and placing in position mild steel /ribbed torsteel rods for all RCC works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods)

Fly Ash Brick Work in CM 1:4 (One Cement & Four Sand) Using Size 9"x4 3/8"x2 3/4" Including Finishing,Curing,Etc., Complete complyingwith Standard specification.

Supply and fabrication of Truss and Purlin using MS plate of various sizes and connected with 125x65mm Channel with required connection for welding including cost of perlin connection with proper bolting arrangement at a height of 7m including the cost of transportation and scaffolding arrangement etc., complete.

Supplying and fixing of MS grill using 'L' angle,MS Flat ,SQ rod and MS sheets etc. completecomplying with standard specifications as directed

Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Flooring with Virtified cool tiles of size 300x300MM thick in CM 1:3 Mix 20mm thk. of approved brand and colour including filling the joints with coloured Epoxy and Adhesive etc complete - 10m2 etc., complete complying with standard specification

Supplying and Fixing of Ornamental Grills using 3"x1.5" Square tube Sections 2.5mn thick alround and 1" round Pipe for Design with 36x6 patta flat centre portico with 7'9"x1'6"and 5'9"x1'6” laser cutting MS Sheet for design including the cost | cutting,brickwork on walls,welding and fixing to alignment as per the site condition etc.complete

Plastering with cement motar in cm 1:5 (one cement and Five sand) 12mm thick in all floors complying with standard specifications

Earthwork Excavation for Pipeline Including refilling

Supplying and Fixing of UPVC,PVC Pipes and Specials

1" UPVC Pipe

1-1/2" UPVC Pipe

3/4" CPVC Pipe

1" UPVC Elbow

1" UPVC Coupling

1" UPVC Shoe

1" UPVC Clamp

1" UPVC Bend

1" UPVC MTA

1" UPVC Union

1"x3/4" UPVC Reducer

1-1/2"x1" UPVC Reducer

1-1/2"x1" UPVC Tee

1" UPVC Tee

1-1/2" UPVC Elbow

3/4" CPVC Bush

1-1/2" Brass Valve

1-1/2" UPVC FTA

1-1/2"UPVC U-Clamp

3/4" CPVC Elbow

3/4"x1/2" CPVC Brass FTA

1" Brass Valve

1-1/2" UPVC Tank Nipple

1"x3/4"UPVC tee

1" UPVC End Cap

1-1/2" UPVC MTA

3/4" CPVC Shoe

3/4"x3/4" Bush

1-1/2" UPVC Coupling

1-1/2" UPVC Shoe

2-1/2" PVC Pipe

2-1/2" PVC Elbow

2-1/2" PVC Shoe

4"x2-1/2" PVC MultiDrop

4"x2-1/2" PVC 9ADrop

2-2/1" PVC Coupling

2-1/2" PVC Door T

2-1/2" PVC Door Elbow

2-1/2" PVC Air Cowl

2-1/2" U Clamp

15" Wall Bracket

12" Wall Bracket

18" Wall Bracket

6" Wall Bracket

8" Wall Bracket

24" Wall Bracket

4" PVC Pipe

4" PVC Elbow

4" PVC Coupling

4" PVC Shoe

4" PVC U Clamp

4" PVC Tee

4" PVC Door Elbow

4" PVC Door Tee

4" PVC Air Cowl

4" PVC P Drop

3/4"x1/2" CPVC Brass Elbow

3/4" CPVC Coupling

3/4" CPVC Tee

1-1/2" PVC Elbow

1-1/2" PVC Pipe

1-1/2" PVC Shoe

1-1/2" PVC Bend

2-1/2" PVC Coupling

1" CPVC Pipe

1"x3/4" CPVC Tee

1" CPVC Elbow

1" CPVC Coupling

3/4" UPVC Pipe

3/4" UPVC Elbow

3/4" UPVC Coupling

3/4" UPVC Tee

3/4" UPVC Shoe

3/4" UPVC Endcap

3/4" CPVC Bypass Bend

2-1/2" PVC Tee

1/2" Testing Plug

3/4" CPVC Concealed valve

3/4" CPVC Endcap

3/4"x1/2" Brass Tee

1-1/2" PVC Coupling

1-1/2" PVC Endcap

PVC UPVC Paste

Supplying and Fixing European Water Closet (white ) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supplying and fixing in position of indian make White Glazed Earthware Wash Basin 1015mmX460mm with all accessories such as Cost Iron Brackets,32mm of Ceramics Snow White and Fixing in Position

Supplying and Fixing of HDPE Tank

Supplying and Fixing of15mm angle valve

Supplying and Fixing of 15mm CP Pillar Cock

Supplying and Fixing of 15mm CP Sink Cock

Supplying and Fixing of 15mm CP Long Body

Supplying and Fixing of 15mm CP BIB Cock

Supplying and Fixing of 15mm CP Flange Flat

Teflon Tape

Supplying and Fixing of 1/2"x1 1/2" PVC Connection

Supplying and Fixing of 1/2"x2' PVC Connection

Supplying and Fixing of 15mm Hex Nipple

Supplying and Fixing of 15x25 Extension Piece

Supplying and Fixing of32mm Waste Coupling

Supplying and Fixing of Rackbolt

Supplying and Fixing ofBrass Screw

Supplying and fixing of 5" Grating

Supplying and Fixing of Health Faucet

Laying of Pipes

1" UPVC Pipe

1-1/2" UPVC Pipe

3/4" CPVC Pipe

2-1/2" PVC Pipe 6kgs/cm2

4" PVC Pipe 6kgs/cm2

1-1/2" PVC Pipe 6kgs/cm2

1" CPVC Pipe

3/4" UPVC Pipe

Paving the floor with Granite Slab (super fine polished with machine cut edges) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the marble slab to size with machine cutting polishing using different grade of corporandum stone,oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete. For Jet Black Colour

Nosing of Granite slab with necessary tools and labour as per the direction of departmental officers etc.,

Providing Epoxy Grouting Over 3mm Spacer Gap for Ceramic Flooring with necessary tools and labour as per the direction of departmental officers etc.,

Flooring with Step Tiles of size 1.20x0.30 with proper nosing etc.,complete

Supplying and fixing of Country Wood Frame Door using 5"x4" Country Wood Frame two Vertical and two Horizontal and fixing 32mm thick water proof Flush Door Double Door Type and fixing with teak Veneer on both side pasted with SH paste with 6nos of Powder Coated Hinges,Brass tower bolt 9"-4nos ,SS Antique Handle-6",SS Antique Aldrop-9"-1no including all labours for fixing(2.2x1.8Size Door )-3.96sqm, fixing the Joineries to the wall and fixing the door with melamine polish etc.,complete

Supplying and fixing of Country Wood Frame Door using 4"x3" Country Wood Frame two Vertical and One Horizontal and fixing 32mm thick water proof Flush Door with 3nos of Powder Coated Hinges,tower bolt 9"-2nos ,Mortice Lock,Handle including all labours for fixing(2.1x1.2Size Door )-2.64sqm and fixing the Joineries to the wall etc.,complete.

Providing Ornametal Finish for Sunshade using brick on edge 11cms thick over sunshade and finishing with 3fold border with round border at the top in Cm 1:3 for elevation-1sunshade-2.1Rm

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) SD 33

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point SD37

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non interlocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point SD39

Supplying of 8 Gauge Copper for Earth Pit

Providing Scafolding alround the Building

Providing 2Coats of wall Putty for Ceiling and Wall Works etc.,Complete

Painting with two coats of plastic emulsion with approved colour best quality paints as per the direction of departmental officers

Painting with enamel paint two coats using good quality and approved colour for new Iron works etc., complete

Painting with enamel paint two coats using good quality and approved colour for new wood works etc., complete

Supply of U-PVC Windows ,using JP23(80mmx50mmx1.3kg/m) and JP111(80mmx50mmx1.3kg/m) U-PVC Prfiles for the Outer Frame.Total Breadth is being divided equally into two or more shutters as per your drawing by using U-PVC Profile JP050 (60mmx36mmx0.80kg/m) and complete with fusion welding.Using 1.2mm Thick GI Reinforcement and Completing the window by fitting with 4mm Clear Glass with U-PVC glass bead JP022 (35mmx18mmx0.27/kg/m)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

BED-CUM-PASSENGER LIFTS (G+3) SS 304 Grade with 1m/sec. speed with ARD Higher End, 15 Persons Passenger Lift Car Size (1100x2150) M-2095 Gearless Lift without Machine Room Each

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and Fixing of PVC Door of 28mm thick and the outer and inner supported over Fibre Glass Wool Sheet 3mm thick and the door supported with frames 3nos of Hinges to the Frame,2no of 4"Towerbolt including screw and fixing charges complete.

Manufacturing, Supplying and Fixing of tainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete