Renovation of Committee Room, Conference Hall and VIP Lounge at MP Hall

Amount

Civil work

Providing & Fixing 3mm thick perforated wooden texture ACP sheet paneling. Providing and fixing 3mm thick perforated wooden texture ACP sheet panels with the help of silicon & double tape supported of Alunium tubes of 2" x 1" x 1.6mm thick @ 600mm c/c both ways. The work should be complete in all respect. (ACP sheet - perforated wooden finish of Allomax or equivalent). The rate include for work done at all heights including scaffolding, labour, cartage & transportation etc., all accessories required for proper fixing of wall panelling as per sound Engineering Practices, all taxes, levies etc. complete in all respects up to the entire satisfaction of the E.I. C.

Supply of Vertical Blinds (Vista / Mac / Décor / Neha’s Touch /Aerolux / Hunter Douglas make). Technical specification of vertical blinds are as under: 1. Head Rail: Head rail is of 25mm high and 47mm wide extruded High strength aluminium alloy section with minimum wall thickness of 0.9mm. the section is anodized for smooth operation and has the provision of fabric valance matching with louvers fabric. 2. End Control Unit (Reduction Gear Box): End Control unit (reduction gear box) having the reduction ratio of 3.5:1 for a very smooth operation of the blind. This unit consists of a planetary gear in the outer housing, four small transmission gears fitted in the middle assembly and an end receiving gear attached to central sprocket unit. 3. Tilt Rod: It is made of extruded aluminium having keyways. The tilt rod is fixed in the end control unit and drives the carrier gear mechanism to rotate the louvers. The average diameter is 5.8mm to achieve minimum torsional deflection 4. Tilt chain: This is made 4.5mm plastic beads moulded on 1.5mm thick polyester cord. The pitch of the beads is 6mm. The chain drivers the sprocket fixed in the end control unit to rotate the louvers by 180 degrees. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation.

Supply and erection of sheet steel enclosures 2 pole/3 pole with earth plug and socket Suitable for incorporating single pole/triple pole MCB on wall/on existing pedestal complete with necessary connections etc:- S.P.N enclosure for single pole MCB 20 amp.

Supply and erection of miniature circuit breaker/isolator 240/415V in the existing distribution board including making necessary connections:- Miniature Circuit Breakers of 9 K.A. breaking capacity 6 amp. To 32 amp.

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Cable size 6 sqmm (7/1.05mm)

Supply, Installation, Testing & Commissioning of Ceiling Mounted Air Conditioner (CassetteAC) with inverter technology capacity 2 Ton / 6000kcl /Hrs of 3 star rating. Make: Mitsubisi / Trane / Hitachi / Carrier / Daikin

Supply, Installation, Testing & Commissioning of Stabilizer 5KVA, Copper winding with digital meter (120V-280V). Make: Logicare / Microtek / V. Guard

Supply, Installation, Testing & Commissioning of Central Control Unit : Control unit should have the RS-232 interface for the programming purpose for Auto Tracking of Cameras. It should have a built in DSP chip which can adjust the audio output and sensitivity automatically. System should have the facility to be able to connect the cameras for look at me feature through required hardware or software and should have the facility of audio video recording of conference. Technical specification:- Frequency response : 50HZ~16KHZ( ±1dBV ) T.H.D. ： ≦0.1% S/N Ratio ： ≧85dBV Conference microphone connection： CAT5E cable RJ-45 port x 4 sets Ethernet Technology: 10 MBPS Ethernet. Make : BXB / Bosch / Shure

Supply, Installation, Testing & Commissioning of Flush Mount Delegate Unit : Flush Mount Delegate Unit should support Cat5 cabling for digital Series-Parallel daisy chain connection and with push to talk, pluggable gooseneck microphone easy to remove when not in use and with light ring for easy identification of the speaker. Microphone length should be 17" to 22". Microphone should get auto off when not in use and also get auto activated when someone starts to speak.Technical Specification:- Frequency response :100HZ~16KHZ Sensitivity : ≧-50dB S/N ratio : ≧70dB Connections RJ-45 Jack x 2 Earphone jack 3.5Ø Stereo Make-- BXB / Bosch / Shure

Supply, Installation, Testing & Commissioning of Mixer Amplifier : Mixer Amplifier should have Minimum of 4 Channel Mixer Amplifier with 240 Watts (RMS),Power Output with 4 Zone 100V (167Ω) / 70V,(82Ω) / 4~16Ω Speaker Output, 20Hx to 20 KHz, Frequency Response, 2 AUX inputs with individual, volume control, 4 Mic inputs with individual, volume control, 5 Control Zone Switch, Priority, Muting Jack for Mic 1 and 2 or better Make --Ahuja/Beta3/Pioneer

Supply, Installation, Testing & Commissioning of 8” Ceiling Speakers, Rated Input of 20Watts (Max), 100V and tapping at (2W/4W / 6W), Frequency Response from 80-15KHz. Or better Make--Ahuja/Beta3/Pioneer

CAT5E-25J - 2.5M Cat 5E cable with Jack

CAT5E-200 - 20M Cat 5E cable with Jack

shri ram fabricators