PROVN OF TEMPORARY TRANSIT ACCN OF VARIOUS LOCATIONS AT AIR FORCE STATION ARJAN SINGH UNDER GE AF PANAGARH

Amount

Sch 'A' Part-I, Eartwork, Site Clearance, Demolition, Dismantling

M&L for Surface dressing n exc 15 cm deep including Site Clearance of any type of soil complete all as specified and directed

Excavation in trenches in any type of soil not exc 1.5m wide and not exc 1.5m in depth and getting out in any type of soil complete all as specified.

Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cum all as specified.

Removal of excavated material as soils not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing

M&F for approved Earth filling under floors, spreading, levelling in layers n.exc 25cm thick each incld watering & well ramming as specified.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. Note: - Only punned thickness shall be measured

M&L for Hard core (broken stone) of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed

Demolition of concrete of any description any position not otherwise specifically provided for cement concrete unenforced Complete as directed by the Engr-in-Charge.

Sch 'A' Part - II : B/R work

M&L for PCC 1:4:8 type D2 ( Using 40mm graded stone agg) as in foundation and mass concrete complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of rough finished surface of concrete flat complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc of rough finished surface of concrete flat .complete all as specified and directed.

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions, etc.of rough finished surface of concrete flat complete all as specified and directed.

M&L for Mild steel TMT bars of any size, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for Reinforced cement concrete (design mix) in M-25 (20 mm graded stone aggregate) Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified.

M & L for Reinforced cement concrete (design mix) in M-25 (20 mm graded stone aggregate) Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified.

M & L for Reinforced cement concrete (design mix) in M-25 (20 mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified.

M&L Damp proof course 40 mm th in cement concrete 1:2:4 type B-0( using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M & L for Damp proof course, Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat and Polythene film, black, 50micron laid in floors complete all as specified and as directed.

M & L for Brickwork with fly ash bricks of class 7.5 and above as per IS 12894:2002, straight or curved on plan exc 6m mean radius, build in CM (1:6) complete all as specified and as directed.

M & L for brickwork with fly ash bricks of class 7.5 and above as per IS 12894:2002, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Rendering 15 mm thick on surfaces other than fair face of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed

M & L for preparation of new plastered surfaces of walls 2mm (avg) thick wall care putty on wall and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, over and including a coat of primer on walls complete all as specified and directed

M&L for preparation of new plaster surfaces and applying on walls/ceiling/chajja/parapet etc with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives on New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note: a. The contractor shall submit the purchase voucher of the same and Engr-in-Charge shall deface and attach with RAR/Final bill. Non-submission may lead to non-payment of RAR/Final bill of this item.

S& F Mild steel bolts (machine made)Neck exc 12 mm but n exc 20 mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed

M&L for cement concrete type C-2, 1:3:6 (20mm graded agg) 75mm thick as in plinth protection, pavement, etc. and finished the surface even and smooth without using extra cement. complete all as specified and directed

M&L for double charged Vitrified Ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of CM (1:4) 15 mm thick for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

M&L for double charged Vitrified Ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in skirting/ dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster in CM(1:4) complete all as specified and as directed by Engr-in-Charge

M&L for Non skid ceramic coloured tiles (premium quality) 7 to 8 mm thick (square/rectangular) of size as approved by GE, joint free tiles, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm th screed bed or bedding layer of mortar in CM 1:4, complete all as specified.

M&L for Coloured glazed ceramic tiles (premium quality) of 7-8 mm thick of size as approved by GE as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including10mm thick plaster in CM(1:3) on fair face of brick or concrete surface complete all as specified and directed.

M&L18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and incl 20mm th screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite icluding nosing complete all as specified and as directed by Engr-in-Charge.

M&L Reinforcement cement concrete (nominal mix) type B0-1:2:4 (12.5 mm stone graded aggregrate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (a) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. (b) The quoted rate shall be inclusive of required size and dia of M.S. hold fast/ lugs or SS dash fasteners.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

M &L for Black bituminous paint on steel surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F for factory made solid PVC wire gauzed door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of wire gauzed shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F Factory made decorative lamination finish single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58- Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. . Note: (a) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. (b) The quoted rate shall be inclusive of required size and dia of M.S. hold fast/ lugs or SS dash fasteners.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture, proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Note: (a) Stainless steel butt hinges and necessary S.S screws shall be paid separately

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete all as specified and directed

Providing and fixing alloy metal brass finished tower bolts (barrel type) of size 200x10 mm with necessary screws etc. complete all as specified and directed

Providing and fixing alloy metal brass finished sliding door bolt of size 250x16mm with nuts and screws complete all as specified and directed

Providing and fixing alloy metal brass finished handles of size 150 mm, with necessary screws etc. complete all as specified and directed.

Providing and fixing undermentioned factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.

Providing and fixing undermentioned factory made uPVC white colour sliding glazed window/ventilators upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. all complete as per approved drawing & direction of Engineer-in-Charge. Two track two panels sliding window/ventilator made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Note for items no. 1.45 and 1.46 (a) After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality and the quoted rate shall be inclusive of the same. (b) Single / double glass panes, wire mesh shall be paid separately). (c) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (d) Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. (e) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

S&F bib tap cast copper alloy fancy type chromium plated screwed for 15mm bore complete all as specified and directed. Make : CON-107KN of Jaqur /F740011of Hindware /or F1016151 of CERA

S&F Brass chromium plated over headed shower rose 105 mm round shape multi flow ( ABS Body chrome plated )with Rubit cleaning system all as specified. Make JAQUAR OHS-1709 /F160216 of Hindware/F7010606AB of CERA

S&F Pillar taps, cast copper alloy chromium plated, fancy type, screwed down, high pressure single lever wihout popup waste with waste with 450 mm long braided hoses screwed shanks and fly nut of 15mm bore complete all as specifed and directed. Make JAQUAR (PRS-CHR-031 /F310014 of Hindware or equivalent price make of CERA

S&F concealed stop cock with fitting sleeves,operating lever &adjustable wall flange with seal(compatible with ALD-083& ALD -089)valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe complete all as specified and directed. Make: Jaquar Cat no COP -083KPM /F280027of Hindware or equivalent price make of CERA

S&F Anglur stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore). Make Jaquar CAT no :-COP -057PM / F280004 of Hindware or equivalent price make of CERA

S&F Towel ring square with round flange CP Brass all as specified. Make:Jaqur CAT NO-ACN-CHR-1121N / F880007 of Hindware or equivalent price make of CERA

S&F Towel rack 600 mm Long with Lower Hangers Superior finished CP Brass complete all as specified and directed. Make:Jaqur CAT NO-ACN-CHR-1181S / F 580008 of Hindware or equivalent price make of CERA

S&f EWC with wall Hung Cistern,Drainage L Bend Pipe, Gasket and installation kit with PP normal close seat cover, Hinges, fixing Accessories and Accessories set, size:350x480x395 mm 'S' Trap, including to existing water supply line and water closet pan complete all as specified and directed. Make : Jaqur cat no CNS-WHT-551SNPP184LZ or equivalent price make of CERA / Hindware

S&F Corner shelf (with bracket)complete all as specified and directed. Make : Jaquar CAT NO-1173 or equivalent price make of CERA / Hindware

S&F soap dish holder complete all as specified and directed. Make: Jaquar cat no- AKP 35731P or equivalent price make of CERA / Hindware

S&F brass chromium plated telescopic Health Faucet(ABS Body) with 1.2 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed. Make:Jaqur Cat No:ALD-CHR-573 or equivalent price make of CERA / Hindware

S&F vitreous china wash basin countr top, white flat back of size(mm)425x425x145(CAT No-ONS-WHT-10901) excluding tap incl bracket,Bottle trap complete all as specified and as directed. Make:JAQUAR CAT NO-ALD-769L250X190 or equivalent price make of CERA / Hindware

S&F PVC connection 60 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes.

Supply and laying of CPVC pipes 16mm dia outer boreSDR 11 &plain CPVC SDR 11 fittings/special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11 fittings/special fittings on walls /ceilings or laying in floors complete all as specified.

M & L PVC (SWR) floor trap/Nahani trap with grating including jointing with solvent cement dia of outlet in 75 mm.

S&F 75 mm bore, PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

S&F 75 mm bore, PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore, PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

Supply & Fix 110mm bore PVC(SWR) vent cowl all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complate all as specified and directed.

S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball valve (minimum weigth of valve 210 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed complete all as specifed and directed.

S&F for SS Gratings 100mm dia with/ without waste hole, complete complete all as specified and as directed by Engr-in-Charge.

Material and labour salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as directed and specified.

Material & labour cement concrete (1: 3 : 6 ) type C-2 with using 40 mm grade stone aggregate for bed to 150 mm dia Sewage pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as directed.

M&L for cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in coping incl surface channel of drain and manhole necessary formwork complete

M&L for RCC 1:2:4 type B1 as in precast cement concrete cover slab (Slab of manhole/septic tank/soak well etc) and set in CM 1:4 all as directed.

M&L Cement concrete type C2-1:3:6(20 MM graded stone aggregate)in surface channels and drains

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded stone agg) as in Sub-base to floor finishes.

M&L for non-skid heavy duty vitrified out door designer tiles of standard size 10-12 mm thick as in floor etct jointed in cement slurry @ 3kg/sqm and pointed in white cement with pigment match with color over and including Screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

S&F structural steel work as in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed Note: (a) The Structural Steel shall be procured from primary producuer only

M&L steel work as in wind ties for roof including securing bolts, etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complate all as specified and directed

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour as approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. Make: Tata/Jindal/JSW

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour as approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. Make: Tata/Jindal/JSW

M&LPlates Fe-410-W(Gde-E-250) quality-B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L for 6 mm thick decorative E-board (as approved by GE) board fixed in ceiling or laid/Aluminium frame work with Aluminium powder coated snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 25 mmX 1.4 mm weighing 0.24 kg per running metre and cross T of size 23.5 X 26.4 X 1.4 mm weighing 0.191 kg per RM with aluminium wall angle of size 40 X 25 X 2 mm including GI supporting wire of 3mm dia or more complete all as specified and as directed. Note: (a) The quoted rate shall be inclusive of all the powder coated aluminum snap grid as per manufature instruction

S&F single lever wall mixer with telephone shower arrengement, connecting legs & wall flanges , cast copper alloy chromium plated, fancy type, screwed down, of 15mm bore complete all as specified and as directed. Make: Jaqur CATNo-FUS-29119/ F2008414 of Cera and equivalent price make in Hindware

S&F Frameless shower partition with 10mm clearToughened glass and all hardware 304 grade stainless steel ,magnetic, PVC profile and silicon silent water treatment also complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thk (ISI marked) with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge.

M&L On site LLDPE for 20 user's septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed.

Sch 'A' Part -III: E/M Works

M&L for concealed point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.

M&L for concealed Point wiring including cutting and chasing on wall / roof surface controlled by one switch with 1.50 Sqmm (nominal area) FRLSH, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLSH, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, not less than 1.50mm thick, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of GI terminal boxes/Sunken boxes of suitable size made with 1.2 mm thick and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and directed for the following :-

(a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the independent board

(d) One socket out let 5/6 amps point on the same board

(e) One bell point controlled by one way switch 5/6 amps.

All as per item No 1.87 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.

M&L for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 35 watts withpre wired and nacessary mounting arrangements, provision of new 3 core multistranded copper conductor cabe from ceilling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 0.75 Mtr long 32 mm dia , MS clamp, nut, bolt and washers complete all as specified and directed by Engineer-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S & F of MCB, DB Vertical TPN, 415 volts 8 ways Single DOOR, IP-43, with MCCB Incomer, metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), single door, single pole & neutral with 200 amps rated bus bar, 240Volt IP-43 protection suitable for fixing MCB"S/lsolators complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), single door, single pole & neutral with 200 amps rated bus bar, 240Volt IP-43 protection suitable for fixing MCB"S/lsolators complete all as specified and directed.

S&F MCB, Triple pole & neutral 100 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion all as directed and as specified.

Supply and fixing ceiling fans complete with blades including down rods of 600 mm long and accessories, 230 V, 1200 mm sweep Min air delivery 210 CFM with service value 6.00 BEE Five star rated including fixing clamp and with all accosaries complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and as directed.

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, incl necessary connection complete all as specified and directed.

S&F Modular white cover plate with frame 1 module complete all as specified and directed.

S&F Modular white cover plate with frame 2 module complete all as specified and directed.

S&F Modular white cover plate with frame 3 module complete all as specified and directed.

S&F Modular white cover plate with frame 6 module with blank switches as required complete all as specified and directed.

S&F Modular white cover plate with frame 8 module with blank switches as required complete all as specified and directed.

Sch 'A' Part -IV: External Electric Supply

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 25 sqmm 4 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

Supply and laying sub class B bricks for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting 32 mm GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L for 32 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

S.M.CONSTRUCTIONS (BID ID -3505433)

UNIVERSAL TRADING (BID ID -3505438)

M/S KUMAR AVINASH (BID ID -3495531)

M/s Raj Kumar Chopra (BID ID -3505376)