Annual Rewinding of 15/20 HP Crompton make horizontal submersible motor pump at Bherugarh (Jail) pump house.

Amount

Labor charge for complete rewinding work of 15/20 HP 440 volt 3 phase Crompton make horizental submersible motor pump cutting of burnt winding taking out burnt winding wire & stesmelted chips p.v.c. material from slots cleaning decorborizing of complette stator slots rotor etc. making new coils fixing in the stator slots insulation etc. complete i/c soldering, brazing, refitting of rewinding motor alignment and dynamically balance of rotor horizental alignment with pump coupling trial & testing etc. complete.

Providing & fixing complete servicing of pump chamber pulley moment of impeller unit with as per required fitting works.

Providing & fixing impullar unit as per required sample with new S.S. check nut, wiser etc. complete.

Providing & carefulley disconnecting of above motor pump at suction & delivery base plate i/c after repairing work complete alignment pump set connecting delivery and suction with required hardware material labor charge for laoding & unloading site at work shop to site.

Providing & labor charge for repairing of old paint from machinery embring red oxide coating 2 coat & painting on the following machines of Bherugarh jail pump house site i/c starter, NRV, SV, discharge pipe line & header pipe line.

Providing & complete repairing, replacing burnet equipment for 20 H.P. penal with 3 set starter & power supply wiring i/c the following works

Labor charge for complete repairing of 20 H.P. penal with 3 starter complete repair, replacement of tripping system changing of conctact & burnet equipment replacement with complete power, control wiring of panel starter i/c trail & testing at site on load.

Providing & fixing of indication lamp

Providing & fixing of relay unit range 28-42 amp.

Providing & fixing of ML-2 contactor

Providing & fixing of ML-1.5 contactor

Providing & fixing of on/off switch

Providing & fixing of timer assembly

Providing & fixing of 63 amp. MCCB, 415 v., 50 hz., for star delta starter

Providing & fixing of ampier meter 0-100 amp.

Providing & fixing of volte meter 0-500 v.

Providing & fixing of current transformer. (CT) range 100-200/5 amp. for majouring of main panel ampier

Provding & fixing of heavy duty capacitor 440 v. 7.5 KVAR capacitor with complete as per required work.

Providing & fixing of 16 sq. mm. 3 core copper flat cable hardware material.

Labor charge for complete repairing opening & refitting of 150 mm dia non return valve & sluice valve i/c cutting of old damaged nut bolt & providing recasting finishing, machining of gate plate holding rod assembly as per sample & required packing, complete nut bolt for fitting on delivery pipe line at site as per following items.

Supply of S.S. 410 spindle rod without G.M. check nut for 150 mm. dia.

Recasting of 150 mm dia sluice valve G.M. check nut i/c recasting, finishing, machining & threading as per sample & cost of extra material complete work.

Repairing of 150 mm. dia. sluice valve C.I. fixture check nut catcher both side i/c welding, finishing cutting as per size of check nut.

Labor charge of opening & refitting of 150 mm. dia. sluice valve i/c cutting of old damaged nut bolt, removal of damaged gland packing, rubber packing, providing, fixing of new by fabricated parts & greasing properly cost of nut bolt, over hanting the valve transportation of material T&P testing & making with risk cover as per requirement.

Providing & fixing of presure gauge meter 0.0 to 7 or 0.0 to 10 Kg./cm2 size 150 mm dia with presure control tube, nut bolt, socket, GI nipple with GM valve 150 mm dia etc complete work.

Note - Old material not return to department.

VAJIHI MOTOR WINDING AND MECHANICAL WORKS