SPECIAL REPAIR BLDG NO P 205 AND 205A (MES IB) AND FIVE MINOR WORK AT AF STN JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed

Mild steel for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties, hooks for hanging fans;; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

Plain, solid, straight chowkats and frames made out of IInd class hard wood (Bonsum/Hollock), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and as directed .

Black bituminous paint, one coat on surfaces of any description wood, steel, iron, concrete, brick, stone, etc. n exc 10cm in width or girth complete all as specified and as directed .

30 mm thick Flush shutters factory made solid core construction, with block board core, and ply wood face panels, commercial type on both side (ISI marked) fixed to chowkhat complete all as specified and directed.

100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

150mm long ,brass barrel tower bolts, , with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

300mm long , sliding door bolt, brass with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

150mm long,Extruded brass handles, fabricated type polished complete all as specified and directed.

150mm length floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in door, fixed as in repair complete all as specified and directed.

Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg, complete all as specified and directed.

PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as bed block, bend fixing hold fast ,filling of door frame etc including necessary use and waste of formwork complete all as specified and as directed

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.complete all as specified and as directed.

18-19 mm thick block boards , grade 1 quality ,exterior grade, commercial type with decorative face veneers one face complete all as specified and as directed

100mm long, extruded brass handles, fabricated type polished complete all as specified and directed.

Hasp and staple 125 mm size, ISI marked , safety type of brass with mild steel hinge pin including bolt to hinge plate and fixed with screws. complete all as specified and as directed

Powder coated aluminium (minimum thickness of powder coating 50 micron) frame /shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed .

Expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction

5 mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and directed.

Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

Vitrified coloured ceramic tiles double charged 10mm thick (square/rectangular), polished, area of each tile exc 0.42 sqm but not exc 1.00 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with wall tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Vitrified coloured ceramic tiles double charged 10mm thick (square/rectangular), polished, area of each tile exc 0.42 sqm but not exc 1.00 sqm in floors etc on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with wall tiles over & including 10mm thick backing coat in cement & sand mortar 1:4 and including dismantling of tiling with cement mortar bedding complete all as specified and directed.

Non skid glazed ceramic tile coloured tiles (1st quality/ premium quality) joint free tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed.

Non skid glazed ceramic tile coloured tiles (1st quality/ premium quality) joint free tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 sqm as on vertical surfaces such as dado, skirting etc etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat of cment mortar (1:4) including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed.

Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm thick as in wall tiling over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Anodised aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 12mm thick medium density fiber board exterior grade , 600mmx 600mm in size, fixed with screw to aluminium work or with staples on snap grid in ceiling, flat or sloping including dismantling of existing ceiling board complete all as specified and directed.

10mm thick designer plaster of paris ceiling with decorative border, with sunk and raised mouldings (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh. complete all as specified and directed.

15mm thick plaster in cement mortar (1:6) on block masonry/stone masonary surfaces or other than of fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete.complete all as specified and directed.

5mm thick ceiling plaster in cement mortar (1:3) on uneven faces of concrete surfaces of ceiling soffits of chajjas/ drop & roof projectiom facia etc , complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) , etc. including demolition of existing concrete complete all as specified and directed.

Excavation over area n.exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.

Removal of excavated soil/ material to a distance not exceeding 250 metre but n. exc 500 m and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) as in ground floors, copings and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Plain cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in foundation filling complete all as specified and as directed

Precast reinforced cement concrete louvers and jalli 25 mm thick in PCC 1:2:4 type B-0,using 12.5 mm graded aggregate and setting in cement and sand mortar 1:4 including all moulding but excluding frame etc complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry/Block masonry, built in cement mortar including all quoins, arches, pillars, etc, at any locations and of any description but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thickness, for rough finished flat surfaces of concrete, complete all as specified and as directed

Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in wash basin counter slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exceeding 50m from site complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to accommodate counter basin etc including dismantling of existing stone slab bedding complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Galvanized steel water tubing medium grade of 25mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Preparing new plaster surfaces and applying a coat of readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of wall complete all as specified and directed.

Complete removal of existing treatment, filling up undulation surfaces and applying a coat of readymixed wall putty on entire surface of ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of ceiling complete all as specified and directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted sufaces and applying two coats of plastic emulsion paint of any etc complete all as specified and directed.

Complete removal of existing treatment and prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and r applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacesof colour as approved by GE.

Preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern),with any type of P or S trap white coloured, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size and waste pipe with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm including dismantling and taking down old unserviceable complete all as specified and directed.

10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe and fixed as in repair complete all as specified and directed.

Sink with drainage board made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm with all fitting and fixure fixed as in repair and also for making good disturbed surfaces of walls to match with adjoining surfaces complete all as specified and as directed

Stainless steel kitchen plate rack 1.00mm thick sheet of size not less than 600x900 fixed with stainless steel screw on wall properly fixed as in repair complete all as specified & directed

15mm bore chromium plated ,fancy type bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as specified and directed.

15mm bore swan neck/long neck fancy type pillar tap cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union fixed as in repair complete all as specified and as directed.

15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repair complete all as specified and as directed. Make:- JAQUAR Model No CON- 167 KNB or other equivalent approved make

15mm bore brass chromium plated fancy type angle cock/stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed. Make:- Jaquar or other equivalent approved make.

15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.Make:- Jaquar or other equivalent approved make.

15mm bore stop valve fancy type, two way angle cock, cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.Make:- Jaquar or other equivalent approved make.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and fixed as in repair complete all as specified and directed.

Wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, fixed as in repair complete all as specified and directed.

Hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work ixed as in repair complete all as specified and directed. Make : JAQUAR Model No ALD-579 or other equivalent approved make.

Chromium plated Jet spray of brass including flexible pipe 1.0 to 1.50m length fixed as in repair complete all as specified and directed. Make:- Jaquar or other equivalent approved make.

Chromium plated shower rose size 120 mm dia and round shape incl fixing to steel pipe or union fixed as in repair complete all as specified and directed. (Make : OJaquar or other equivalent approved make.

Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. Make:- Make:- Jaquar,Code-ACN-1153S or other equivalent approved make.

Soap dish stainless steel any type, fixed to plugs with chromium plated brass screws complete all as specified and directed . Make:- Jaquar,Code-ACN-1131N or other equivalent approved make.

Sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long fixed as in repair complete all as specified and directed.

Tubular towel rail, stainless steel, 20mm dia, D type, 60cm long fixed with & incl chromium plated brass screws and wooden / plastic cleat fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius with access door provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) vent cowl fixed complete all as specified and directed.

Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris foe all lead and lifts, all complete all as specified and directed. Note : The rate is inclusive of necessary scaffolding for any number of floors.

Applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified mortar or micro concrete with two coats of CICO-Latex SBR or equivalent in Fosroc /STP as per manufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concretecomplete all as specified and directed. MAKE: CICO LATEX SBR or equivalent in Fosroc/STP/BASF

Applying to the damaged concrete portion of slab/columns/beams/chajjas/parapet /roof projection/balcony/staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious ptch repair mortar CICO Repocem PM (having the technical parameters mentioned in material specifications ) capable of applying up to 20-25mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness and Equivalent of Fosroc Renderoc/STP/BAS

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rolled to a true surface complete all as specified and directed

10mm thick, size 300x300mm coloured endura parking tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Excavating in post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface any type of soil complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling asbestos cement, plain or corrugated sheeting, any gauge, thickness, complete all as specified and directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exc. 30cm averaging 15 cm deep in soft /loose soil getting out complete all as specified and as directed

Plain cement concrete (1:3:6) typeD-2 using 40 mm graded stone aggregate as in mass filling and foundation complete, all as specified and as directed

Mild steel work as in roof trusses ( framed ), purlins, post,rafter etc made out of MS pipe, flat, angle or hollow square section conforming to Fe-410 W Gde E-250 quality A complete all as specified & directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges roof covering/cladding to wall, fixed with self tapping screws including dismantling asbestos cement, plain or corrugated sheeting, any gauge, thickness, complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even complete all as specified and directed.

60mm thick,interlocking paver block M-35 grade machine pressed factory made rubber moulded precast concrete any shape and size conforming to IS-15658-2006 of with grey cement with pigment including 25mm thick machanically compacted thickness of sand bedding below paver tiles laid to required level & slope and dismantling of existing tiling complete all as specified and directed.

Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in lintel, parapets , plinth course , cill, bed block, coping ,bed plate, bond stone etc including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Gde E-165 (Fe-290) complete all as specified and directed.

Supply only mild steel galvanized chain link fencing of any size and type with weight not exceeding 4 Kg/Sqm complete all as specified and directed. Note:- (i) Flat iron, round bars, nut bolts and washer shall be measured and paid for separately. (ii) The weight of chain link fencing shall be ascertained by BOO as ordered by Accepting officer and payment shall be made accordingly. BOO duly counter signed by Accepting officer shall be enclosed with final bill.

Fixing only mild steel galvanized chain link fencing of any wire mesh including line wires and type of standards rails, straining bolts etc. including provision of binding wire and fixing with MS angle iron fencing post complete all as specified and directed. Note:- Supply only chain link fencing shall be measured and paid for separately.

15mm thick plaster in cement mortar (1:4) on external wall surfaces finished even & faie including taking down old plaster complete all as specified and directed.

Squared rubble walling, Jodhpur type regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.

Extra over hammer dressing to face stones with maximum depressions on face from a straight edge not exc. 20 mm and dressing face beds and joints as specified to SR walling Jodhpur type brought upto courses complete all as specified and directed.

Keyed pointing in cement and mortar (1:4) to square rubble masonry coursed or brought upto courses etc complete all as specified and directed.

25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling coarse in flooring, finished even and rough complete all as specified and directed.

Factory made coloured Rubber moulding chequered cement concrete 25cmx25cmx25mm thick ,,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment,over & including 15 mm thick screed bed in cement &sand morter 1:6 complete all as specified

Taking down carefully existing unserviceable/perished conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/ conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators etc and making good the disturbed surfaces of wall/ceiling complete all as specified & directed.

Point wiring for one light point/ fan point controlled by one, one way switch with 1.50 sqmm PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20 mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.

All as per serial item No. 108.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on independent board complete all as specified and directed.

All as per serial item No. 108.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on same board complete all as specified and directed.

All as per serial item No.108.00 here-in-before but one bell point controlled by one bell push

Point wiring for one 6 Pin, 15/16 Amps socket outlet controlled by one switch on independent board with 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 volt grade including 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC conduit with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated & including suitable size module boxes for housing of modular switches, sockets, regulators complete all as specified and directed. Note : (i) Unit rates quoted by contractor shall be deemed to included for cutting chases in walls, ceilings and making good surfaces in cement and sand mortar (1:3) and finishing the surfaces to match with existing surfaces. (Make : Hylem/Anchor including machine screws and washer etc for fixing switches sockets etc including 4 sqmm copper conductor, standard (green colour earth), PVC insulated unsheathed earth wire to commen earth and connected to earth dolly as specified and directed.

Switch piano, flush type, Single Pole, one way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.

Switch piano, flush type, Single Pole, one way, 15/16 Amp, 240 Volts (ISI Marked) complete all as specified and directed.

Bell push, Single Pole, one way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 5/6 Amp, flush type, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 15/16 Amps, flush type, 240 Volts (ISI Marked) complete all as specified and directed.

Switch piano, flush type, Single Pole, two way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.

Bell multi music, Single Pole, one way, , 230 Volts (ISI Marked) complete all as specified and directed.

Electronic fan regulator,Stepped type , flush type and connecting up, 120 watt, 240 volt (ISI marked) fixed as in repair complete all as specified and directed.

Ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC / Polycarbonate,isolated body fixed as in repair complete all as specified and as directed.

Sub main wiring with two single core 6.00 sqmm, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 6.00 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in 25mm dia PVC conduit incl taking existing complete all as specified and directed. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor and one run 25mm dia PVC conduit shall be measured & paid as one unit (running metre).

Sub main wiring with two single core 4.00 sqmm, , PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 4.00 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in 25mm dia PVC conduit incl taking existing complete all as specified and directed. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor and one run 25mm dia PVC conduit shall be measured & paid as one unit (running metre).

Sub main wiring with two single core 4.00 sqmm, , PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 4.00 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in 25mm dia PVC conduit incl taking existing complete all as specified and directed. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor and one run 25mm dia PVC conduit shall be measured & paid as one unit (running metre).

Surface and wall mounted 10 watt LED bulk head fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 including taking down old unserviceble LED fittings complete all as specified and directed.

LED tube light fittings of cap 10W , Two feet basic all purpose surface and wall mounted LED batten with extruded aluminium housing & integrated electronic driver with all including taking down old unserviceable LED complete all as specified and directed

Sheet metal enclosure powder coated single phase DB SPN 12 ways (2+10 way) and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 8 ways (2+6 way) and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure for VPTN DBs 4 way , double door, (IP-43) built in bus bars complete suitable for 415 Volts AC, 50 Hz , supply , suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed.

MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles including complete, all as specified & directed.

MCB, SPN, 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.

MCCB, 4 Pole, 100 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC supply, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 deep below normal ground level and connected to and including galvanized earth lead wire 4mm dia upto 7.5 metre by means of GI nuts, bolt, check nuts, washers thimbles, etc as shown in electrical plate No 03 SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type to soil, returning fitting in and removal of surface spoil to a distance not exc 50 metre, PCC chamber (1:3:6) type C-2, charcoal and salt mixed layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe light grade 20mm bore for watering and 15mm bore long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers 75mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frame etc complete all as specified. Note - (i) PCC chamber shall be constructed at least 1.5m away from the earth electrode. The pipe for watering shall be provided in slanting manner. The cost of 7.50m GI pipe for protection of earth wire/strip .(ii) Quoted amount deemed to include the cost of excavation /earthwork , PCC pit , funnel , cover GI medium grade protectiom pipe.

Taking down carefully ceiling fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enamelled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed.

Taking down carefully Exhaust fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing and fixing back the fan in position complete all as specified and directed.

Taking down carefully and hanging /re fixing only of geysers after collection from MES store yard including necessary fasteners carrying out complete servicing with and including cleaning, greasing and fixing back in position complete all as specified and directed.

MCB Protected Socket (Modular AC Box, Metal clad box) Two Module, with Single Pole, MCB 20 Amps, repturing capacity 10 kA and neutral enclosure in sheet steel with a two pin and earth plug and socket including taking down old unserviceable complete all as specified and directed.

18 Watt LED Downlighter Recess Mounting made out of Thermally conductive engineering plastic finished in white color having inbuilt driver , high transculent frosted optically diffuser, glare free light, IP-20, Square / Round Shape and White/Warm white Color ( As per Site Requirment ) having lumen output of 1800 Lumens ( in CDL/ Cool White Colour ) ) including connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnected & taking down old unserviceable light complete all as specified and directed .Make:-Crompton Cat Ref LSDEP-12-CDL or equivalent in other equivalent approved make

LED Street Light of capacity 30 Watt with inbuilt Driver having pressure die cast aluminium housing , IP 66 having efficiency >100 lumins/watt, operating voltage-120-270 volts, PF >.95, THD < 10 % Suitable for 30 to 40 mm O.D mounting pipe and suitable for mounting on wall/pole with. necessary Mounting arrangements) including connecting up with three core twisted flexible copper conductor cable with suitable size. mounting pipe/Bracket, Nut Bolts and accessories including disconnected and taking down old unsv light complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for laying of cables, pipes, erection of poles, structs/stays etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

Dry tibba sand cushioning to underground cable provided with a layer of 8cm deep before laying cable and 15cm after laying of cable and punned to 18cm after laying of cable and cover for protection of underground cable complete all as specified and directed. Notes :- (i) Approved dry sand free from vegetation, grass and other deleterious substances shall be used. (ii) For the purpose of payment only punned thickness shall be measured for payment.

Stone patti 40 to 50mm thick rough dressed Jodhpur stone slab cover in trenches for protection of cable 25 to 35cm wide and not less than 60cm in length laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Supply, laying or fixing or passing through GI pipe, commissioning and testing of PVC / XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade of the cross section area 70sqm 3.5 core including suitable size lugs complete all as specified and directed.. Note:- Excavation & earth work, sand cushioning, where required shall be measured & paid separately under relevant items:-

LED bollard light 10 Watt IP65 rated inverted pyramid tripod type with Shaft 360 degree light distribution complete all as specified and directed . Make:-Crompton Cat:- LBLSN-10CDL or equivalent in other equivalent approved make

AMBEY MAA CONSTRUCTION COMPANY

BHAGWATI CONSTRUCTION

M/S PIYUSH CONSTRUCTION COMPANY

M/s Fateh Enterprises