Strengthening work of 33 KV main bus at 132 KV sub station Hasayan under ETD II Aligarh

Amount

Erection of Bus Bar along with other associated works

Destringing of 33KV , 3 Phse Bus Bar of single ACSR Moose conductor including Dismentalling of Disc insulator strings, Tension Fittings with all 33KV feeders & transfarmers bays Jumper etc. along with shifting of the conductors, meterials from erecton site to sub station store with associated work (1 job for each section of bus bar)

laying & Stringing of 33KV , 3 Phse Bus Bar of Duble ACSR Moose conductor including hoisting of Disc insulator strings, Tension Fittings, spacer etc with Jumpering of all 33KV feeders and transfarmers bays along with shifting of the conductors, meterials form storage place at the sub station to erecton site (1 job for each phase to bus bar)

Erection of following equipments including their shifting from storage place at the sub station to erection site and fixing of associated materials like clamps connectors, fittings etc.

Junction box for 145 KV PT

145 KV 1250A Manual Isolator (BI) With PI.

Junction box for 33 KV CT

Lattice type main and auxiliary structure

Under frequency relay panel

Dismentalling od 33 KV CT with junction box (Old)

Earthing of equipment by cutting straightening , bending, laying up to 700mm below inside ground & above ground of following size M.S Flate for diagonal/double earthing of the main & aux. structure, equipments structure, transformer body, OLTC pennel, Marshalling box and its neutral point including welding with main earthmat and with object to be earthed, excavation of trenchs, soil its back filling to complete the work. etc including painting with one coat of red oxide then two coat of of green enameld good quality paints as per detail below:

1) 75x10mm size MS Flat

2) 50x6 mm xize MS Flate

Laying of following sizes control cables in cable trenches from transformer control & relay panel ABT Meter cubicle RTCC panel in control room to equipments like transformer, T/F marshalling box 132 KV Circuit breaker CT, PT etc. in swichyard as per cable schedule including shiftiing of cables in drums from storage place at the sub station to erection site and shifting back the balance cables to stores at the sub station .

2C X 2.5 sqmm

4C X 2.5 sqmm

6C X 2.5 sqmm

10C X 2.5 sqmm

Termination of following sizes laid control cables extending D.C Supply from DCDB and A.C supply from ACDB to TBC panel & equipments (like CB etc) including drilling of holes, providing & fixing of cable glands, ferrules & crimping type lugs.

2C X 2.5 sqmm

4C X 2.5 sqmm

6C X 2.5 sqmm

10C X 2.5 sqmm

Electrical safety processing fee needed for providing all relevant safety clearance documents from electrical safety deparment for energization of the above commissioned 40MVA transformer and its associated bays (amount in approximation)(Note : the amount payable is actual rate of challan or quoted rate, whichever is lower)

Supply & fixing of junction box size 280×225×150 mm made of 10SWG sheet duly powder coated painted and fixed with MS flat clamp, nut-bolt with 1 no. 2Amp. MCB single pole, nutral and 08 number terminal block.

Taking out the cable from junction box to light fitting fixed over the pole and gantry with fixing clamp of MS flat with each crossed bracing on structure proper dressing with all other associated work to complete the job as per specification including the cost of all material and labour excluding cable.

Providing & fixing of new generation energy & enviornment friendly long aluminum outdoor beam Street light with high power 120W LEDs as light source & exclusively designed polycarbonate cover along with electronic driver complete fitting suitable for 220 Volt AC input supply of IS make or CGL/Havells/Philips with 2 year warranty after the date of installation Standard brand etc.

Supply & fixing of G.I. pipe bracket made of 40mm dia GI pipe 01 number with one band and total length of 850mm having single arm with required M.S. Clamp and Nuts and bolts suitable for fixing LED street light fitting.

Supply component :

Supply of bolted type Double Suspension fitting assembly, suitable for double ACSR Moose Conductor as per sample.

70 KN antifog disc insulators (if required)

Supply of bolted type Double Tension fitting assembly, suitable for double ACSR Moose Conductor as per sample.

Supply of 33 KV Isolator Terminal connector for T/F Side duly made of LM-6 Aluminium alloy, suitable for ACSR Twin Moose conductor complete with 6 No. 16x75mm sizw GL Bolts, nuts, Spring & Plain Washer as per sample.

Supply of 33 KV Isolator Terminal connector for 33KV Feeder side duly made of LM-6 Aluminium alloy, suitable for ACSR Twin Panther conductor complete with 6 No. 16x75mm sizw GL Bolts, nuts, Spring & Plain Washer as per sample.

Supply of 33 KV VCB Terminal connector 33 KV VCB side duly made of LM-6 Aluminium alloy, suitable for ACSR Twin Moose conductor complete with 6 No. 16x75mm sizw GL Bolts, nuts, Spring & Plain Washer as per sample.

Supply of 33 KV VCB Terminal connector for feeder side duly made of LM-6 Aluminium alloy, suitable for ACSR Twin Panther conductor complete with 6 No. 16x75mm sizw GL Bolts, nuts, Spring & Plain Washer as per sample.

Supply of PG Clamp duly made of LM-6 Aluminium alloy, suitable for ACSR Panther to Panther conductor complete with suitable GI Bolts, nuts, Spring & Plain Washer as per sample.

Supply of PG Clamp duly made of LM-6 Aluminium alloy, suitable for ACSR Moose to Panther conductor complete with suitable GI Bolts, nuts, Spring & Plain Washer as per sample.

Supply of PG Clamp duly made of LM-6 Aluminium alloy, suitable for ACSR Moose to Moose conductor complete with suitable GI Bolts, nuts, Spring & Plain Washer as per sample.

Supply of Bus post Clamp duly made of LM-6 Aluminium alloy, suitable for ACSR Moose conductor complete with suitable GI Bolts, nuts, Spring & Plain Washer as per sample.

Supply of Bus post Clamp duly made of LM-6 Aluminium alloy, suitable for ACSR panther conductor complete with suitable GI Bolts, nuts, Spring & Plain Washer as per sample.

Supply of spacer for Twin moose conductor

Supply of 75x10mm MS Flat for Grounding/Earthing System

Supply of 50x6mm MS Flat for Grounding/Earthing System

Supply of Sand bucket Galvanized mild steel (Fire bucket)

Supply of Stand for sand buckets

Supply of Fire extiguisher 22.5KG CO2 Type (Portable)

Portable AFF mechanical foam type Fire Extinguisher complete with initial charge hose pipe and all other accessories and fittings as as per IS 1024 Trolley/ Wheel mounted 45/50 litre capacity

SHASHI ENTERPRISES

Technocrat Electrical