Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹11.4 L+₹23,895 (2.14%)Rejected-Finance 364 4 FIRDAUS SHABANA MARKET NEW SABZI MANDI JK COLONY ROAD KANPUR 07 | KANPUR NAGAR | UTTAR PRADESH | 208001 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹11.5 L+₹34,365 (3.08%)Rejected-Finance 229 CHANDEL MARKET HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹13.5 L+₹2.3 L (21.1%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹14.7 L+₹3.6 L (31.9%)Rejected-Finance H NO 200 GIRJA NAGAR 37 BN P A C LINE KANPUR 208015 | KANPUR | KANPUR | UTTAR PRADESH | 208015 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Jan 2020, 6:00 pmClosed
GE (AF) E/M Chakeri Kanpur
GE (AF) E/M Chakeri Kanpur 208008
COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION WORK TO SNCS AND ORS MD ACCN AT AGV AFS CHAKERI KANPUR
2019_MES_292805_2
8329/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) E/M Chakeri Kanpur
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) E/M Chakeri Kanpur
₹40,000
27 Jan 2020
24 Dec 2019
18 Jan 2020
24 Dec 2019
17 Jan 2020
3 Jan 2020
Amount
Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, bell push switch, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed.
M & L for surface point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including PVC casing caping 20 / 25 mm white / ivory with all accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC / Polycarbonate gang box of appropriate size for fixing of switches / sockets, fan regulators, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing complete all as specified and directed for the following :- For one light, fan, call bell. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
-Ditto- all as per item No 2 here-in-before but for one socket point controlled by one switch on independent board complete all as specified and directed.
-Ditto- all as per item No 2 here-in-before but for one socket point controlled by one switch on same board complete all as specified and directed.
-Ditto- all as per item No 2 here-in-before but for One light point controlled by two, two way switch complete all as specified and directed.
All as per item No 2 here-in-before but in PVC casing /caping for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.
M & L for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and directed. Make : Cona/Havells/Anchor
M & L for switch flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified and directed. Make : Cona/Havells/Anchor
M & L for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and directed.. Make : Cona/Havells/Anchor
M&L for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F for socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified and directed. Make : Cona/Havells/Anchor
M&L for bell push, flush type 5 Amps white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S & F in replacement, Calling Bell 230 Volt, AC complete all as specified and directed. Make : Cona/Havells/Anchor
S&F for ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed. Make : Cona/Havells/Anchor
S&F for lamp holder insulated body with back plate suitable for angle / batten fitting complete all as specified and directed. Make : Cona/Havells/Anchor
Taking down main switch/DB/AC box of any capacity including fixing accessories complete all as specified and directed.
S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. Make : Legrand/Schiender/L&T
Supply & fixing in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. Make : Legrand Cat Part No 408587, 408590, 408592 to 408595 or equivalent in Schiender/IndoAsian.
-Ditto- all as per item No 19 here-in-before but SP 40-63 Amps -do-. Make : Legrand Cat No 408596 & 408598 or equivalent in Schiender/IndoAsian.
-Ditto- all as per item No 19 here-in-before but SPN 32 Amps -do-. Make : Legrand Cat No 408617 or equivalent in Schiender/IndoAsian.
-Ditto- all as per item No 19 here-in-before but SPN 40 - 63 Amps -do-. Make : Legrand Cat No 408618 / 408620 or equivalent in Schiender/IndoAsian.
-Ditto- all as per item No 19 here-in-before but TP 40 - 63 Amps -do-. Make : Legrand Cat No 408659 / 408661 or equivalent in Schiender/IndoAsian
-Ditto- all as per item No 19 here-in-before but TPN 40-63 Amps -do-. Make : Legrand Cat No 408792 / 408794 or equivalent in Schiender/IndoAsian
-Ditto- all as per item No 19 here-in-before but TPN 100 Amps -do-. Make : Legrand Cat No 406522 or equivalent in Schiender/IndoAsian
S&F sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly on in concealed position complete all as specified and directed. Make : Legrand/Schiender/L&T
S&F in replacement metal clad socket industrial 2pin & earth plug top 20A, 230V suitable for AC Box complete all as specified and directed.. Make : Legrand/Schiender/L&T
S&F in replacement metal clad socket industrial 2pin & earth plug socket 20A, 230V suitable for AC Box complete all as specified and directed. Make : Legrand/Schiender/L&T
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab /Havells / Gloster / Finolex . Note : (a) Two run of single core copper conductorcable and one run of earth copper condutor shall be measured and pain as one unit. (b) PVC Conduitand cutting chasing and making good if required shall be measured and paid seprately under respective item .
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed. Make of wire:Poly cab /Havells / Gloster / Finolex . Note : (a) Two run of single core copper conductor cable and one run of earth copper condutor shall be measured and pain as one unit. (b) PVC Conduitand cutting chasing and making good if required shall be measured and paid seprately under respective item .
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Nicco /Havells / Gloster / Finolex . Note : (a) Two run of single core copper conductor cable and one run of earth copper condutor shall be measured and pain as one unit. (b) PVC Conduitand cutting chasing and making good if required shall be measured and paid seprately under respective item .
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old sub main wiring complete all as specified and directed. Make of wire: Poly cab /Havells / Gloster / Finolex . Note : (a) Two run of single core copper conductorcable and one run of earth copper condutor shall be measured and pain as one unit. (b) PVC Conduitand cutting chasing and making good if required shall be measured and paid seprately under respective item .
S & F in replacement of LED 4fit batten 21 watt with nominal system lumen output of 2000 lumens and minimum system capacity of 95 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a colour temperature of 6500 K and CRI>70. The luminaire shall meet IP20 rating with THD <20% and PF > 0.95. The luminaire housing should made of CRCA with PC glossy diffuser complete all as specified and directed. Make : Philips BN021C LED 20S PSUCDL / Wipro (Trim LED NEO ) Cat No LL20-221-XXX-65-NE1 of equivalent in Bajaj
Material and labour for energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting complete all as specified and directed. Make : Philips Cat Part No : BN021LED 10S-6500 PSU GRS1 / Wipro Cat No LL20-111-XXX-65-NE / Havells Cat No : ENDURALINEARNEOBS10WLED865SPCWH
Supply & fixing decorative LED luminary suitable for wall mounting 15 / 8 watt retrofit CFL complete with LED Bulb 8 watt, lamp holder complete made up of polycarbonate including fixing arrangements and taking down old rusted bracket fittings complete all as specified and directed. Make : Philips, Cat Part No : NOVA 30575/31/86 or equivalent in/CG/Wipro
S & F LED 8 Watt bulb complete all as specified and directed. Make : Philips/Wipro/Osram/Bajaj/CG
Receiving complaints from concern Incharge of Internal section (Power House) lodged by the occupants of Internal electrification nature, taking down tube light / CFL fitting/Bracket fittings/Flameproof tube light fittings/ bulkhead flameprrof fittings any wattage from roof /wall and PVC Cables for light/fan/bell/light or power socket complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, suck boxes, juction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tap, screws, nuts as required to rectifing the fault with record to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engr-in-charge/users. dismantling at site testing of unserviceable item and serviceable and replacement the same and tightening the connections,replacement of unserviceable connecting wire and ensuring the the earth wire is properly connected to earth wire and metallic part of fitting, cleaning of fittings externally and internally after ensuring the serviceablity of fittings & refixing the same at same place or as directed place testing complete all as specified and directed. Note - (i)Tube light any type, Choke any type, CFL, starter, bipin holder, starter holder etc accessories, required for repairing will be paid under relavent items as considered threin .
Supply only Fluorescent Tube light T-8, 36 Watt, 230 V complete all as specified and directed. Make Philips/Wipro/osram/CG
Supply only Fluorescent Tube light 18 Watt, 230 V complete all as specified and directed. Make Philips/Wipro/osram/CG
Supply only Compact flourescent lamp (CFL ) spiral type 1 x 8W , 230V complete all as specified and directed. Make : Philips/Wipro/CG
Supply only Compact flourescent lamp (CFL ) retrofit type 1 x 8W , 230V complete all as specified and directed. Make : Philips/Wipro/CG
Supply only Electronic ballast 1 x 36W, 230V complete all as specified and directed. Make : Philips/Wipro/CG
Supply only Electronic ballast 1 x 18/20W 230V complete all as specified and directed. Make : Philips/Wipro/CG
Supply only Heavy duty VPIT copper ballast for FTL 36 /40 Watt complete all as specified and directed. Make : Philips/Wipro/CG
Supply only Heavy duty VPIT copper ballast for FTL 18/20 Watt complete all as specified and directed. Make : Philips/Wipro/CG
Disconnecting and taking down of Unserviceable elect meter Single phase of any capacity and depoisted to MES store complete all as specified and directed..
S&F PVC/polycarbonate rectangular block for mounting of electric meter of any rating with 3mm thick plasic laminated sheet cover of size 350x300x50mm complete all as specified and directed..
Supply and fixing Electronic Meter 10-60 amps Single phase tamper proof with Class 1 accuracy Optical port, LED Indication for earth leakage, Elegant Polycarbonate Enclosure, High Surge withstand up to 8 kv, anti tamper features, Electromagnetic compatible & 6 digit Display complete all as specified and directed. Make : L&T Model No.EM 101 Cat No.WW101BC7DDH or eqivalent in HPL/Secure
S&F in replacement PVC insulated three core wire copper conductor 1100 Volt grade of size 0.5Sqmm complete all as specified and directed.
Taking down fan, celing cable end, dismantling blades and removing fan and blades to stores complete all as specified and directed.
M&L for removing of burnt winding from ceiling fan stator of size 1200mm/1400mm sweep and rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to contractor's work shop and bringing back to store and testing complete all as specified and directed.
S&F in Replacement of ball bearing (No 6201, 6202 & 6203) suitable for Ceiling fan 1200mm/1400mm suitable as per site requirements complete all as specified and directed. Make SKF/NBC.
Hanging only ceiling fan taking down fvide item no. 50 item and refixin fan regulator connecting up with flexible cableand testing complete all as specified and directed.
Taking down carefully exhaust fan of any size any capacity any sweep including dismantling of blades and removing brackets for checking defects at site or deposit to store as per condition complete all as specified and directed.
M&L for removing of burnt winding from exhaust fan and rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to work shop and bringing back to store and testing complete all as specified and directed
S&F in Replacement of ball bearing suitable for exhaust fan 300 mm sweep complete all as specified and directed.
Hanging only exhaust fan taking down vide item No. 54 above any size from any position at site in position etc complete all as specified and directed.
Supply & Fixing in replacementCondenser 2.5 mfd 440 V AC 50 Hz suitable for 1200/1400 sweep A ceiling fan complete all as specified and directed. Make : EPCOS/Orient/Usha
Supply & Fixing in replacement of 4"x4" size PVC laminated ISI marked top cover 3 mm including cutting/drilling holes for mounting of switches, sockets, etc as per site requirement suitable for following sizes of sunken/TW board complete all as specified and directed.
All as per Item No 59 above but 7”x4” size complete all as specified and directed
All as per Item No 59 above but 8”x6” size complete all as specified and directed
All as per Item No 59 above but 8”x10” size complete all as specified and directed
All as per Item No 59 above but 10”x12” size complete all as specified and directed
M & L earth wiring with single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable 1 runs of 1.5 sqmm drawn in existing PVC conduit and connected to common earth dolly complete all as specified and directed. Make of wire : Poly cab /Havells / Gloster / Finolex .
kay pee construction
A.B.Enterprises
VEE KAY ENTERPRISES
DHARM ENTERPRISES
Bidder Name
H S ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .