Repairs of snow cat Farmtrac 90HP and snow cat Escorts (09) 60HP of Snow Clearance Control Room Bandipora, SD II Handwara.

Repair to Snow Cat Farmtrac 90 HP by way of Replacement of Clutch Assembly Components, Reassembly, and Associated Works. Scope of Work: The work involves complete dismantling of the tractor’s clutch housing, inspection of clutch-related components, replacement of damaged parts, reassembly, alignment, lubrication, and functional testing of the Snow-Cat. Detailed Description of Work: Dismantling of Clutch Housing Assembly, Careful opening of the clutch housing of the 90 HP Farmtrac Snow Cat. Disconnecting linkages, transmission interface and related mechanical joints. Safe removal of all bolts, fasteners, and covers. Removal and Replacement of Damaged Components The following components, if found worn-out/damaged during inspection, are to be replaced with OEM-spec parts: Main Clutch Plate (Friction Plate), Pressure Plate Assembly, Intermediate Disc Plates (As applicable for dual/independent clutch system) Clutch Housing / Bell Housing (Complete Assembly) The replacement includes: Detaching old components, Cleaning mounting surfaces, Installing new components with correct torque settings, Ensuring alignment with transmission input shaft, Replacement of Bolts, Nuts & Fasteners (Wherever Required), replacement of steering oil of OEM recomended ( 02 litters approx)Replacement of worn/damaged bolts, washers, and fasteners with new ones of appropriate grade. Includes consumables like spring washers, locking pins, cotter pins etc. Cleaning Operations: Thorough cleaning of dismantled parts using HSD (High Speed Diesel) to remove carbon, dust, grease residue, and metallic particles. Use of dohti cloth for wiping, drying, and finishing. Air blowing (if available) for final cleaning. Lubrication and Greasing, Application of recommended grade grease on release bearing, linkages, and mechanical joints. Light lubrication of moving components as per Farmtrac service manual. Reassembly of Clutch System: Refitting of clutch housing with new assembly, Alignment of input shaft, pedal linkages and related components. Reconnecting all transmission mating parts, Final Testing and Trial Run, Checking gear shifting smoothness, Vibration and noise inspection, Full-load clutch engagement testing Ensuring operational readiness for snow clearance duty

Replacement of Gear Oil: This includes draining of old/contaminated gear oil from the differential housing, rear axle assembly and gearbox of the Snow Cat. The job involves opening the drain plugs, allowing complete discharge of used oil, cleaning of magnetic plugs and filler ports, checking for metal debris, and refitting the plugs with new washers (where required). Fresh OEM-recommended grade gear oil is then filled to the specified level. The work also includes inspection of seals for leakage, ensuring proper lubrication of all gear components, and testing for smooth gear shifting after refilling. Necessary labour, tools, and consumables are included.