Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.4 LAccepted-AOC 60 MADHUVAN BANK COLONY ALWAR | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹49.1 L+₹3.7 L (8.09%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹91,000
Closing Date
2 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
PROVN OF GARAGE FOR SCANIA AND PROVN OF SENTRY POST AND TOILET IN CITY AREA ALWAR
2022_MES_515899_1
8069/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹91,000
Yes
30 May 2022
30 Mar 2022
4 May 2022
30 Mar 2022
2 May 2022
13 Apr 2022
30 Mar 2022 - 12 Apr 2022
60 days
Amount
Excavation in post holes in soft/loose soil (similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge and all as specified.
M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.
S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using butt welded RHS/SHS confirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint.
M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed by Engr-in-Charge.
S&F for Mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as directed by Engr-in-charge.
M&L for plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B, complete all as specified & directed by Engr-in-Charge.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/ cladding t wall fixed with self tapping screws as specified or fixed with L type or J type hook bolts & washers etc complete all as specified & directed by Engr-in-Charge. Make - TATA/JINDAL/JSW Steel or equivalent.
S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/cladding t wall fixed with self tapping screwas as specified or fixed with L type or J type hook bolts & washers etc complete all as specified & directed by Engr-in-Charge. Make - TATA/JINDAL/JSW Steel or equivalent.
Surface dressing n exc 30cm deep and and averaging 15cm deep and getting out soft soil complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete
Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting point complete all as specified& directed by Engr-in-Charge.
M&L hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface in Broken stone or boulders complete all as specified and directed by Enge-in-Charge.
Rolling and consolidating for hardcore / soling of broken boulders or quarried stone exc 8 tonne & n exc 12 tonne power roller complete all as specified and directed by Engr-in-Charge.
M&L for PCC Type D2 1:4:8 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.
M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as per directed by Engr-in-Charge
Add/deduct to item above if Extra/less/kg of cement used for cubic metre
Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified & directed by Engr-in-Charge.
M&L precast cement concrete solid block factory made as in Kerb stone in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates) set in CM 1:6 (size of precast concrete block complete all as specified & directed by Engr-in-Charge.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size brick) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on concrete surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified.
M&L anti termite treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L anti termite treatment treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)
M&L anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L for 40mm thick DPC to horizontal or vertical surfaces including necessary form work PCC 1:2:4 type B-0 using WPC @ 3 % of cement by weight [ Integral WPC should be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and directed by Engineer-in-Charge
M&L brick work with fly ash bricks, straight or curved on plan to any redius in half brick thick walls built in CM 1:4 complete all as specified & directed.
M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 5 mm thick on brick work or concrete surface as in ceiling in cement mortar 1:3 and finished smooth and even without using extra cement complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified & directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified& directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified& directed by Engr-in-Charge.
M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in sub base etc complete all as specified.
M&L 75mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed by Engr-in-Charge.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified& directed by Engr-in-Charge.
M&L non skid ceramic tiles colored 300mm x 300mm x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge. Make :Somany/Johnson /Orient.
M&L glazed ceramic coloured tiles in vertical surface 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.
M&L for RCC Type B0 1:2:4 (12.5mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified& directed by Engr-in-Charge.
Form work to soffits of suspended slabs and similar works not exc. 200mm thick surfaces of concrete.
Form work to edges of concrete flats,sides of RCC/PCC bands & similar works, not exc. 20cm wide of concrete.
S&F mild steel TMT bars 8mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.
S&F steel ventilator with top hung shutter with glazing bars including hinges steel peg stay etc
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.
S&F sheet glass ordinary quality,in squares n. exc. 0.5 sqm each 3.0mm thick complete as directed by Engineer-in-charge
M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing.
M&L factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed by Engr-in-Charge.
S&F butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed by Engr-in-Charge.
S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engr-in-Charge.
S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed by Engr-in-Charge.
S&F PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed by Engr-in-Charge.
S&F rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks complete all as specified& directed by Engr-in-Charge.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge.
S&F gun metal glove or gate valve brass high pressure with polythelene and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge.
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.
S&F fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.
S&F white vitreous china wash hand basin 'Flat back' of size 550mm x 400mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed by the Engr-in-charge.
S&F 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed ddown high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed by the Engr-in-charge.
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as directed by the Engr-in-charge.
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed by Engr-in-Charge.
S&F stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge.
S&F Vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge.
S&F PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.
S&F grating doom 100mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) vent cowl 110mm complete all as specified & directed by Engr-in-Charge.
S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/walls complete all as specified & directed by Engr-in-Charge.
M&L rendering 15mm thick in CM 1:4 with water proofing compound over green concrete surface (WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed by Engr-in-Charge.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces over bituminious primer complete all as specified& directed by Engr-in-Charge.
M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC (1:4:8) type D2 (using 40 mm graded stone aggregate).
M&L salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specified.
M&L PCC(1:3:6) type C1 (using 20mm graded stone aggregates) in benching to manhole complete all as specified
S&F 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed blocks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe complete all as specified and as directed.
Cutting and inserting tee, L bow, bend/collar and tapping the connection from the existing 50mm GI tubing line for taking branch connections including tapping accessories complete all as directed.
M&L galvanised steel water tubing light grade of 20mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately.
S&F Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore.
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
All as per serial item No 88.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 88.00 here-in-before but for one exhaust fan/ceiling fan point controlled by one switch and regulator.
All as per serial item No 88.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 88.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin(with 2pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface Bakelite 65x50mm two or three terminals complete all as specified and directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube 6000K of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves/Bajaj/Wipro as approved by GE
S&F sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 32 Amps, single pole & neutral, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed. Make : Legrand/Havells/ABB
S&F MCB 6-32 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed. Make : Legrand/Havells/ABB
S&F 2nd class hard wood rectangular block open recessed of size 30x25x5 cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawlplug(4 Nos), complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
M&L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (Tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L GI pipe (light grade) for protection of LT cable fixed to wall/pole/road crossing including clamps complete all as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
S&F exhaust fan complete 300mm sweep 240 volts AC including provision of hole in wall of suitable size for fixing of exhaust fan all as directed by Engr-in-Charge. Make : Havells / Crompton / Bajaj/Orient
S&F ceiling fan 5 star rating complete of 1200mm sweep 240 volts AC including provision of hook in ceiling of suitable size for fixing incl neessary elect connection all as directed by Engr-in-Charge. Make : Havells / Crompton / Bajaj/Orient
S&F LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make :- C&S Cat Part No LTESS20WLED or equivalent of Crompton Greaves / Wipro as approved by GE
S&F LED bulb energy saving 10/11W complete all as specified and directed> Make : Havell's/Crompton/ Syska
S&F lamp holder PVC/Polycarbonatetype with back plate suitable for batten fittings complete all as specified.
M/s Laxmi Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .