Supply and Construction of Devp of Upper Maratha Ground (01 x Recreation hall with sports facilites, 1 x Cook House cum Dining hall, 1 x CTB with Bio Toilet and 1 x Covered pathway (S and C)

Supply and Construction of Recreation Hall with sports facilities (Job No 2676B) Superstructure Supply & Constr of Pre-Engineered Portable Frame Multi Purpose Hall of size 45M x 25M x 8M (Clear Ht) Height including 4 side covered Slope roof, with Portal Frame Structure With Sports Flooring & Sports Facilities as specified in technical specifications and Drawings. The structure made out of primary members of High Tensils Steel (340 Mpa min) and Secondary members of (240Mpa) steel. The main wall made of AAC/PCC Block Masonery of two 3 mtr ht and wall shall be made above 3 mtr Ht made of glass/ Puf Panels and toughen glass of 12mm thik shall be provided at the front of the shelter upto ht of 3 Mtr. The roofing will be made of 0.60mm PPGI red colour coated sheets. Walls including Internal PVC Wall Panelling up to 3.00 mtr ht and outer side exterior designer panelling made of Non asbestos Fibre cement board for Elegant Look of Building. Detailed specification are att as per Appx 'A. Store list of constr mtrl and elect items attached as per Annx I. Notes:- 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings: (i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets. (ii) Design Folder (One set of Hard copy and one set soft copy in CD). (iii) All Drawings on Auto Cad. 9. All the above structural calculations, designs and arch drawings must be vetted and signed by an authority not in personal capacity, but on behalf of the institution and submitted to the Accepting Officer as per the timelines of the project. The third party vetting the designs/drawings shall also be liable for ensuring that the designs and drawings produced are in compliance as per laid down standards, regulation and sound engineering practices. 10. Design Consultancy QR.For architectural and structural designs, mechanical, electrical, plumbing design/ drawings and other services required under Engineering scope of the work, the contractor will be permitted to source his designs and drawings from single consultant or multiple consultants as under: (i) Consultants approved by IITs/NITs/Govt Engr Collage, Or (ii) Suitable professionals with Qualification Requirement as stipulated and employed in his own organization, Or (iii) Any other consultant meeting the Qualification Requirement as stipulated to be nominated by the contractor for the subject work. 11.For the purpose of engineering phase of the Contractor shall enter into MoU with Consultant(s) immediately on acceptance of the contract and shall submit the same to accepting officer for his record.

Labour cost on Constr of Superstructure

E & M items Distribution box 8 Way, double door SPN 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS - 8623 double door type (Make : Havells/Legrand/L&T/ISI equivalent).

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent).

MCB SP 6 to 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent).

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent).

Cable PVC insulated electric cable (heavy duty)1100 volts grade multi standerd copper conductor of size 1.5 sqmm single core (FRLS) confirming to IS 1554 (Part-I) 1988 (Make : Havells /Finolex/ Polycab/ISI equivalent).

Cable PVC insulated electric cable (heavy duty)1100 volts grade multi standerd copper conductor of size 2.5 sqmm single core (FRLS) confirming to IS 1554 (Part-I) 1988 (Make : Havells /Finolex/ Polycab/ISI equivalent).

PVC casing capping 1” long Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent).

PVC casing capping 3/4” long Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent).

Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/Cona/ISI equivalent).

LED Tube light fittings 18/20 W rechargeable 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete (Make : HAVELLS/ BAJAJ / PHILIPS/ CROMPTON / ISI equivalent)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt.

Steel Screw full thread with rawl of size1 1/2 ISI Marked, 100 Nos per Pkt.

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex/ISI equivalent).

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex/ISI equivalent).

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent).

Switch socket combination (snow white) multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/ SSK/ CONA/ISI equivalent).

Switch socket combination (snow white) 5 Amp 230 Volts (Make : Anchor/ SSK/ CONA/ISI equivalent).

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long Make:-Jindal/Tata/Kalinga/ISI equivalent.

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 6 Sqmm 2 core (Make : Havells/ Finolex/ Plaza/ISI equivalent).

Cable XLPE insualted screened PVC bedded, galvanised steel strip or wire armored electric power cable (heavy duty) 1100 volts grade with multi stranded aluminum conductor of size 25 Sqmm 4 core , FRLS, confirming to IS 7098 (part-1) 1998 (Make : Havells /Finolex /Polycab)

Change over switch 100 Amps, 4 pole, TPN confirming to IS 13947 (Part 3 ) 2607 (Make :- Havells/ Standard/L&T)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent).

LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts rechargeable type (Make :Havells/Bajaj/ Philips/Cropmtion/ISI equivalent).

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: havells/ Finolex/ Plaza/ISI equivalent).

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/Supreme/Finolex/ISI equivalent).

PVC Round/Square Block (Make:- Polycab/Supreme/ Finolex/ISI equivalent).

LED lights/LED luminaire floodlights 60 watt with rated voltage 230 V AC, 50 Hz auto cut off. Make : HAVELLS/ BAJAJ / PHILIPS/ CROMPTON / ISI equivalent)

Exhaust fan heavy duty metal frame of 230 V for 450 MM sweep (Make : BAJAJ/CROMPTON/USHA)

6 Amp switch

6 Amp socket

16 Amp socket

16 Amp switch

Road and street security lighting 60 watt with rated voltage 230 V, 50 Hz auto cut off. Make : HAVELLS/ BAJAJ / PHILIPS/ CROMPTON / ISI equivalent)

Earthing items. Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga/ISI equivalent)

GI wire 4 mm diameter (For earthing).

Charcoal

Salt normal

Lightening Conductor with safe Chemical. i) Zinc & Alloy Coated Safe Earthing Electrode (76.3mm dia) 2 mtr long with back frilled compound conductotile - 2 Bags CPRI approved(ii) Air Terminal single pointed aluminium rod 12mm dia and 600mm.(iii) GI pipe med cgraded 3 mtr loing 40mm dia. Make TATA/JINDAL/BANSAL(iv) Insulator with screw 10 Nos(v) Aluminium cable 70Sqmm multi standed single core. Make PLAZA/HAVELLS/ RALLISON ISI Marked 10 RM.(vi) Testing point terminal box made out of gun metal of phosphorus of size 75mmx75mmx5mm with screw.(vii) Nut and bolts 2" x 1/2" - 08 Nos(viii) Foundation Nuts & bolts 16mm x 400mm - 04 Nos.(ix) Aluminium lugs 70Sqmm for connection of cable with nut & bolts of suitable size - 02 Nos.(x) Earthing pit cover- 01 Nos.(xi) PCC Brick size 230x100x75 mm - 15 Nos(xii) Sand - 0.15 Cum(xiii) Stone Agg 20 mm - 0.25 Cum(xiv) Cement - 1 Bags

Labour cost on E/M items

Furniture. Study chair of size length 56 Cm, Height 82 Cm and Width 56Cm, Type: Lacquered finish with arm, sear and back cushion, velvet uphostery (Make: Supreeme or ISI equivalent) As per photograph of sample attached.

Table of size (900x600x750mm) 18mm thick prelaminated particle board side pannel with 25.4mmx1.2mm thick round ERW tubes-31.8mmx1.2mm thick ERW tubes-31.8mmx1.2mm thick round ERW tubes and 28.6mm x1.2mm thick and welded together and hooks of 2mm thick MS sheet.

Storage Rack -Mild Steel rack adjustable ,sheet 1.00mm thick, nuts and bolts are in hexagon blck steel, overall height 1.755m depth 0.410m and width 0.915m

Peg stays iron steel metal size 200mm 5 way. (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 lts/hour with storage compartment and auto shut off facility. (Make: VOLTAS/LG/USHA/ISI equivalent)

Plastic dustbin of capacity 40 ltr (Make: NEELKAMAL/CELLO/SUPRELE/ISI equivalent)

Library rack for book with glass door 1800 x 900mm, 5 number of shelves with 400 mm depth of bookcase IS 12823/Latest

Multimedia Projector (MMP) with 1920 x 1080 (full HD) resolution. Make : BenQ/Epson/Sony/ISI equivalent

Projector screen 180 inches, wall mount supported display resolution 1080p, 4k and above. Make : Epson/Inlight/ELCOR /ISI equivalent

Wooden Podium/Lecture stand design gable end and modesty panel and top material decorative block board BWP grade conforming to IS 1659/equivalent

Wall mount Two way PA Speaker with 2 year warranty. Make : Ahuja/ Philips /Sony / JBL / Yamaha/ ISI equivalent

Board with Stand for 1270 mm x 920 mm with extended height of 600 mm

Toyotomi Automatic Kero Room Heater, Omni 230, Igniiton-Automatic, Height-60 centimeter, Weight-14 Kilogram, Burning Time/Tank->=14, Width-46 Centimeter, Type of Tank-Integral, Max. Temperature Range (To be self certified by the OEM) - Upto -30 degree C, Fuel Consumption (Less than) in Ltr/hr-<=0.6, Tank Capacity->=7, Depth 46 centimeter, Ignition-Automatic, Heating Capacity (sqft)-800, Pollution-Non-Toxic fume, Removable Fuel Tank-Fixed Tank & Guarantee-1 Year and all as per Technical specifications

Labour cost on Furniture items

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery. (Make :- Fire End/AFO/Safe Guard/ISI equivalent)

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery. (Make :- Fire End/AFO/Safe Guard/ISI equivalent)

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendlye, and suitable for all type of fires. (Make :- AFO/Kanex/Fire Stop/Elide/Fire End/Safe Guard or ISI equivalent)

Fire extinguisher of 2 kilogram capacity, ABC type conforming to IS-13849 along with its accessories

Labour cost on Fire Alarm System

Supply and Construction of Cook House (Job No 2676E) Superstructure (CH) Cook House (size 18M x 6.M x 4.75M height with 1.50M rear Varandah) shall be supplied as specified in tech specification Notes:- Incl Design Consultancy QR incl IIT Vetting, Design Mix, Soil Testing and Consultants approved by IITs/NITs/Govt Engr Collage 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings: (i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets. (ii) Design Folder (One set of Hard copy and one set soft copy in CD). (iii) All Drawings on Auto Cad. 9. All the above structural calculations, designs and arch drawings must be vetted and signed by an authority not in personal capacity, but on behalf of the institution and submitted to the Accepting Officer as per the timelines of the project. The third party vetting the designs/drawings shall also be liable for ensuring that the designs and drawings produced are in compliance as per laid down standards, regulation and sound engineering practices. 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings:

B/R items Fabrication from Structural steel section for staging of water storage tank made of capacity 500/1000 ltrs made out of MS angle iron frame of size 50 x 50 x 6mm thick with height of 4.0 mtr above ground level and 0.6 mtr below ground level embeded in PCC 1:2:4 of 20mm graded agg below the ground level. The inner bracing of staging should be fixed with 40 X 40 x 5mm MS angle iron fixed with suitable size MS plate of 3mm thick and at top of the staging 1.2m x 1.2m x 3mm for placing the PVC tank and anchored with MS angle iron frame of size 25 x 25 x 5 mm thick with ht of 0.80 mtr from the bottom of Base plate of tank incl ladder complete with two coats of metal painting over one coat of primer (Make of angle iron : TATA/SAIL/JSW/ISI equivalent)

Looking Mirror of size 600 x 450 mm with 4 mm thick glass and 4 mm thick back ply (Make : Prayag/Saint Gobain/ Modigaurd/ISI equivalent)

Chromium plated Piller cock swan neck with aerator and butter fly handle weight not less then 450 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Stop Cock angular type Chromium plated Brass 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Bib Cock long spout brass chromium plated 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Connection 45 cm long 15 mm (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

PPR Pipe 32 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Pipe 20 mm Dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR Elbow 90° 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Elbow 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Female thread Socket 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR Plain T 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Plain T 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Reducer T 32-20-32 mm dia (Make : SFMC/Finolex/Supreme/ISI equivalent)

PPR Union 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Tank Connector 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC Wall Clamp 32 MM (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC wall clamp 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PVC Float Valve 20 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Gate Valve 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

M Seal 150 GM Pkt (Make:- Pidilite/Fevicol/M Seal/ISI equivalent)

Taflon Tape Roll (ISI Marked) (Make :- Supreme/Omega/Asbestos/ISI equivalent)

Solvent Cement 150 GM Tube (Make:- Finolex/Fit Well/Jindal/ISI equivalent)

PVC Waste Pipe 32 mm and 1m long (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Chromium plated Waste coupling 32 mm dia (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick Make: (Johnson/ Kajaria/ Orient/t) 1st quality confroming to IS -156-2006ISI equivalen

CP grating 100 mm dia (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Pipe 110 mm dia 3 mtr long (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Socket 110 mm (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Bend110 mm (Make :- Prince/Finolex/Supreme/ISI equivalent)

PVC T 110 mm (Make :- Prince/Finolex/Supreme )

Cast iron floor trap with grating 100 mm dia

Curtain Arrangement Drapery and rod made of 25 mm dia and 1600 mm long, pre coated MS pipe with fancy type ends. Suitable fixing arrangement for the curtain rod, shall be made and supplied to hold the curtain rods alongwith fixing arrangement complete. (ISI Marked)

White Cement confirming to IS 8042/1989 (Make: ACC/Birla White /Ambuja/ISI equivalent)

Water Storage tank triple layer 1000 Ltrs confirming to IS 12701-1996 (Make : Sintex /Ultrapure Aqua /Polywell)

Vitreous china Wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size . Make:- Cera or equivalent model No 1009 /Hindware/Parryware/ISI equivalent).

PPR Reducer Elbow 32mm x 20mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

Brass CP Wall Mixer for mixing hot and cold water screwed down for PPR pipe of dia 20mm (Make : Cera / Hindware / Parryware/ISI equivalent)

Plastic dustbin of capacity 40 ltrs (Make : NEELKAMAL/CELLO/SUPREME/ISI equivalent)

Peg stays iron

STEAM COOKING SYSTEM WITH 4 SS VESSELS FOR 400 MEN, STEAM GENERAOR IS LPG OPERATED FITTED WITH PRESSURE GAUGE, WATER LEVEL, SAFETY POINT AND SAFETY VALVE WITH LIGHTING FACILITY

VEGETABLE CUTTING MACHINE 30 KGS CAPACITY WITH 4 DIFFERENT SUPERIOR BLADES FITTED WITH 0.5 HP MOTOR

POTATO PEELING MACHINE SS CAPACITY 10 KGS.ABRASIVE LINING IN PEELING DRUM, FITTED WITH 1 HP MOTOR, PEELING TIME 1-2 MINUTE

WET GRINDER TILTING MODEL 5 LTR CAPACITY

DIESEL BHATTI 5" BURNER

RICE COOKER 100 LTR TILTING TYPE SS BODY

RICE WARMER ELECTRIC SS, DOUBLE WALLED GLASS WOOL INSULATION. TEMPERATURE CONTROLLER WITH OF ON SWITCH, 2 INDICATOR LIGHT, HEATING ELEMENT OF KANTHAL WIRE,CAPACITY 10 KG COOKED

AATA KNEADING MACHINE 15 KG CAPACITY, MILD STEEL BODY WITH DETACHABLE SS KNEADING DRUM & ARMS , FITTED WITH 2 HP MOTOR

Labour cost on B/R items

E/M Items Distribution box 8 way double door SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS – 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

MCB SP 6 to 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 2.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 1” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

PVC casing capping of size 3/4”’ Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Tube light fittings 20W Rechargeable 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete (Make : HAVELLS/BAJAJ/PHILIPS/CROMPTON/ISI equivalent)

Steel screw full thread with rawl plug of 1 1/2" size (ISI Marked) 100 Nos/ Pkt

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex/ISI equivalent)

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Switch socket combination(snow white) multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Switch socket combination (snow white) 5 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make:-Jindal/Tata/Kalinga/ISI equivalent)

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 10 Sqmm 2 (Make : Havells/ Finolex/ Plaza/ISI equivalent)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts (Make : HAVELLS/BAJAJ/PHILIPS /CROMPTON/ISI equivalent)

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: Havells/Finolex/Plaza/ISI equivalent)

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/Supreme/Finolex/ISI equivalent)

PVC Round/Squire Block (Make :- Polycab/Supreme/Finolex/ISI equivalent)

Fire extinguisher of one kilogram capacity, dry power type conforming to IS-13849 along with its accessories (Make: Cease fire/Omex/Alfa Fire/ISI equivalent)

Exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings (Make : Bajaj/Havells/ Crompton/ISI equivalent).

Exhaust fan heavy duty metal frame of 230 V for 450 MM sweep (Make : BAJAJ/CROMPTON/USHA/ISI equivalent)

Electric Geyser 5 star of capacity 25 ltr. (Make : V-GUARD/RACOLD/BAJAJ /CROMPTON/ISI equivalent)

Refrigerator 220 Ltr Make: Whirlpool

Water coolers capacity 40 liters per hours Make: Canter

6 Amp Modular Socket

6 Amp Modular Switch

16 Amp Socket

16 Amp Switch

Earthing Plate Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga/ISI equivalent)

GI wire 4 mm diameter (For earthing).

Charcoal

Salt normal

Lightening Conductore (i) Zinc & Alloy Coated Safe Earthing Electrode (76.3mm dia) 2 mtr long with back frilled compound conductotile - 2 Bags CPRI approved (ii) Air Terminal single pointed aluminium rod 12mm dia and 600mm. (iii) GI pipe med cgraded 3 mtr loing 40mm dia. Make TATA/JINDAL/BANSAL (iv) Insulator with screw 10 Nos (v) Aluminium cable 70Sqmm multi standed single core. Make PLAZA/HAVELLS/ RALLISON ISI Marked 10 RM. (vi) Testing point terminal box made out of gun metal of phosphorus of size 75mmx75mmx5mm with screw. (vii) Nut and bolts 2" x 1/2" - 08 Nos (viii) Foundation Nuts & bolts 16mm x 400mm - 04 Nos. (ix) Aluminium lugs 70Sqmm for connection of cable with nut & bolts of suitable size - 02 Nos. (x) Earthing pit cover- 01 Nos.

Labour cost on B/R items

Fire Fighting Equipment Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery.

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendly, and suitable for all type of fires.

Fire extinguisher of 2 kilogram capacity, dry power type conforming to IS-13849 along with its accessories

Labour cost on Fire Fighting Equipment

Furniture Chair with Cushion

Table 900x600

SS table

Supply and Construction of Dining Hall (Job No 2676E) Superstructure (DH) Dining Hall (size 18M x 6.M x 4.75M height with 1.50M rear Varandah) shall be supplied as specified in tech specification Notes:- Incl Design Consultancy QR incl IIT Vetting, Design Mix, Soil Testing and Consultants approved by IITs/NITs/Govt Engr Collage 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings: (i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets. (ii) Design Folder (One set of Hard copy and one set soft copy in CD). (iii) All Drawings on Auto Cad. 9. All the above structural calculations, designs and arch drawings must be vetted and signed by an authority not in personal capacity, but on behalf of the institution and submitted to the Accepting Officer as per the timelines of the project. The third party vetting the designs/drawings shall also be liable for ensuring that the designs and drawings produced are in compliance as per laid down standards, regulation and sound engineering practices. 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings:

B/R items Fabrication from Structural steel section for staging of water storage tank made of capacity 500/1000 ltrs made out of MS angle iron frame of size 50 x 50 x 6mm thick with height of 4.0 mtr above ground level and 0.6 mtr below ground level embeded in PCC 1:2:4 of 20mm graded agg below the ground level. The inner bracing of staging should be fixed with 40 X 40 x 5mm MS angle iron fixed with suitable size MS plate of 3mm thick and at top of the staging 1.2m x 1.2m x 3mm for placing the PVC tank and anchored with MS angle iron frame of size 25 x 25 x 5 mm thick with ht of 0.80 mtr from the bottom of Base plate of tank incl ladder complete with two coats of metal painting over one coat of primer (Make of angle iron : TATA/SAIL/JSW/ISI equivalent)

Looking Mirror of size 600 x 450 mm with 4 mm thick glass and 4 mm thick back ply (Make : Prayag/Saint Gobain/ Modigaurd/ISI equivalent)

Chromium plated Piller cock swan neck with aerator and butter fly handle weight not less then 450 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Stop Cock angular type Chromium plated Brass 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Bib Cock long spout brass chromium plated 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Connection 45 cm long 15 mm (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

PPR Pipe 32 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Pipe 20 mm Dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR Elbow 90° 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Elbow 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Female thread Socket 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR Plain T 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Plain T 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Reducer T 32-20-32 mm dia (Make : SFMC/Finolex/Supreme/ISI equivalent)

PPR Union 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Tank Connector 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC Wall Clamp 32 MM (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC wall clamp 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PVC Float Valve 20 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Gate Valve 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

M Seal 150 GM Pkt (Make:- Pidilite/Fevicol/M Seal/ISI equivalent)

Taflon Tape Roll (ISI Marked) (Make :- Supreme/Omega/Asbestos/ISI equivalent)

Solvent Cement 150 GM Tube (Make:- Finolex/Fit Well/Jindal/ISI equivalent)

PVC Waste Pipe 32 mm and 1m long (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Chromium plated Waste coupling 32 mm dia (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick Make: (Johnson/ Kajaria/ Orient/t) 1st quality confroming to IS -156-2006ISI equivalen

CP grating 100 mm dia (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Pipe 110 mm dia 3 mtr long (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Socket 110 mm (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Bend110 mm (Make :- Prince/Finolex/Supreme/ISI equivalent)

PVC T 110 mm (Make :- Prince/Finolex/Supreme )

Cast iron floor trap with grating 100 mm dia

Curtain Arrangement Drapery and rod made of 25 mm dia and 1600 mm long, pre coated MS pipe with fancy type ends. Suitable fixing arrangement for the curtain rod, shall be made and supplied to hold the curtain rods alongwith fixing arrangement complete. (ISI Marked)

White Cement confirming to IS 8042/1989 (Make: ACC/Birla White /Ambuja/ISI equivalent)

Water Storage tank triple layer 1000 Ltrs confirming to IS 12701-1996 (Make : Sintex /Ultrapure Aqua /Polywell)

Vitreous china Wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size . Make:- Cera or equivalent model No 1009 /Hindware/Parryware/ISI equivalent).

PPR Reducer Elbow 32mm x 20mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

Plastic dustbin of capacity 40 ltrs (Make : NEELKAMAL/CELLO/SUPREME/ISI equivalent)

Labour cost on B/R items

E/M items Distribution box 8 way double door SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS – 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

MCB SP 6 to 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 2.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 1” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

PVC casing capping of size 3/4”’ Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Tube light fittings 20W Rechargeable 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete (Make : HAVELLS/BAJAJ/PHILIPS/CROMPTON/ISI equivalent)

Steel screw full thread with rawl plug of 1 1/2" size (ISI Marked) 100 Nos/ Pkt

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex/ISI equivalent)

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Switch socket combination(snow white) multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Switch socket combination (snow white) 5 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make:-Jindal/Tata/Kalinga/ISI equivalent)

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 10 Sqmm 2 (Make : Havells/ Finolex/ Plaza/ISI equivalent)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts (Make : HAVELLS/BAJAJ/PHILIPS /CROMPTON/ISI equivalent)

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: Havells/Finolex/Plaza/ISI equivalent)

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/Supreme/Finolex/ISI equivalent)

PVC Round/Squire Block (Make :- Polycab/Supreme/Finolex/ISI equivalent)

Fire extinguisher of one kilogram capacity, dry power type conforming to IS-13849 along with its accessories (Make: Cease fire/Omex/Alfa Fire/ISI equivalent)

Exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings (Make : Bajaj/Havells/ Crompton/ISI equivalent).

Exhaust fan heavy duty metal frame of 230 V for 450 MM sweep (Make : BAJAJ/CROMPTON/USHA/ISI equivalent)

Electric Geyser 5 star of capacity 25 ltr. (Make : V-GUARD/RACOLD/BAJAJ /CROMPTON/ISI equivalent)

Refrigerator 220 Ltr Make: Whirlpool

Water coolers capacity 40 liters per hours Make: Canter

6 Amp Modular Socket

6 Amp Modular Switch

16 Amp Socket

16 Amp Switch

Earthing Plate Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga/ISI equivalent)

GI wire 4 mm diameter (For earthing).

Charcoal

Salt normal

Lightening Conductor (i) Zinc & Alloy Coated Safe Earthing Electrode (76.3mm dia) 2 mtr long with back frilled compound conductotile - 2 Bags CPRI approved (ii) Air Terminal single pointed aluminium rod 12mm dia and 600mm. (iii) GI pipe med cgraded 3 mtr loing 40mm dia. Make TATA/JINDAL/BANSAL (iv) Insulator with screw 10 Nos (v) Aluminium cable 70Sqmm multi standed single core. Make PLAZA/HAVELLS/ RALLISON ISI Marked 10 RM. (vi) Testing point terminal box made out of gun metal of phosphorus of size 75mmx75mmx5mm with screw. (vii) Nut and bolts 2" x 1/2" - 08 Nos (viii) Foundation Nuts & bolts 16mm x 400mm - 04 Nos. (ix) Aluminium lugs 70Sqmm for connection of cable with nut & bolts of suitable size - 02 Nos. (x) Earthing pit cover- 01 Nos.

Labour cost on E/M items

Fire Fighting Equipment Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery.

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendly, and suitable for all type of fires.

Fire extinguisher of 2 kilogram capacity, dry power type conforming to IS-13849 along with its accessories

Labour cost on Fire Fighting Equipment

Furniture Table food warmer stainless steel with temperature controller, ss with 3 containers of bits each

Chapati warmer electric ss, double walled glass wool insulation. Temperature controller with of on switch, 2 indicator light, heating element of kanthal wire, capacity 400 chapati

Insect fly catcher with two tubes of 2 ft 20 wts

RO plant 300 ltr capacity

Stainless steel dining table with seat fitted 8 ltr

Chair with Cushion

Table 900x600

Peg stays 5 way

Supply and Construction of CTB with Bio-Toilet (Job No 2676G) Superstructure Combined Toilet Bathroom of size 7.32m x 7.10m x 4.40m height shall be supplied as specified in tech specification.

Labour cost on Constr of Superstructure

B/R items Water Storage tank triple layer 1000 Ltrs confirming to IS 12701-1996 (Make : Sintex /Ultrapure Aqua /Polywell/ISI equivalent).

Fabrication from Structural steel section for staging of water storage tank made of capacity 500/1000 ltrs made out of MS angle iron frame of size 50 x 50 x 6mm thick with height of 4.0 mtr above ground level and 0.6 mtr below ground level embeded in PCC 1:2:4 of 20mm graded agg below the ground level. The inner bracing of staging should be fixed with 40 X 40 x 5mm MS angle iron fixed with suitable size MS plate of 3mm thick and at top of the staging 1.2m x 1.2m x 3mm for placing the PVC tank and anchored with MS angle iron frame of size 25 x 25 x 5 mm thick with ht of 0.80 mtr from the bottom of Base plate of tank incl ladder complete with two coats of metal painting over one coat of primer (Make of angle iron : TATA/SAIL/JSW/ISI equivalent).

WC European type single pc with cystern and seat cover. Make:- Hindware / Parryware/ISI equivalent

Brass Chromium plated towel Rail 600 m Long 20 mm dia with cloth hooks min 04 Nos (Make: Ess Ess/Prayag/Johnson Suisse/ISI equivalent)

Chromium plated Piller cock swan nech with aerator and butter fly handle weight not less then 450 gm (Make : ESS Ess/ Prayag/ Johnson Suisse/ISI equivalent)

Stop Cock angular type Chromium plated Brass 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

Two way Bib Cock long spout brass chromium plated 15 mm weight not less then 330 gm (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Connection 45 cm long 15 mm (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms (Make:-Ess Ess/Prayag/ Johnson Suisse)/ISI equivalent

Supply of 4/5 KLD High Altitude Bio Digester Tank with 4 CUM tank-Dimension 2m L x 2m B x 1m H). Double walled FRP Biodigester Tank with one 100mm pipe with ball valve at the bottom of the tank. Mde of FRP with insulation

PPR Pipe 32 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Pipe 20 mm Dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR Socket 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Elbow 90° 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR female thread socket 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Female thread Elbow 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

PPR female thread T 20 mm dia (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Plain T 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PPR Reducer T 32-20-32 mm dia (Make : SFMC/Finolex/Supreme/ISI equivalent)

PPR Union 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Tank Connector 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC Wall Clamp 32 MM (Make:- SFMC/Finolex/Supreme/ISI equivalent)

PVC wall clamp 20 mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

Float Valve 25 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

Gate Valve 32 mm (Make:- SFMC/Finolex/Supreme/ISI equivalent)

M Seal 150 GM Pkt (Make:- Pidilite/Fevicol/M Seal/ISI equivalent)

Taplon Tape Roll (ISI Marked) (Make :- Supreme/Omega/Asbestos/ISI equivalent)

Solvent Cement 150 GM Tube (Make:- Finolex/Fit Well/Jindal/ISI equivalent)

PVC Waste Pipe 32 mm and 1m long (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Chromium plated Waste coupling 32 mm dia (Make:-Supreme/Johnson Suisse/Famingo/ISI equivalent).

Non skid Ceramic tiles of size 300mmx300mm on the floor. Minimum thickness shall be between 6-8 mm tiles of Make: Johnson/ Kajaria/ Orient/ISI equivalent (1st quality) conforming to IS : 15622-2006)

CP grating 110 mm dia (Make:-Ess Ess/Prayag/ Johnson Suisse/ISI equivalent)

PVC Pipe 110 mm dia 3 mtr long (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Socket 110 mm dia (Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Bend110 mm dia(Make :- Prince/Finolex/Supreme/ISI equivalent )

PVC Air Pipe 25 mm dia (Make : SFMC/Finolex/Supreme/ISI equivalent)

White Cement confirming to IS 8042/1989 (Make: ACC/Birla White /Ambuja/ISI equivalent

Vitreous china Wash hand basin white of size 540mmx350mm with vitreous china pedestal of suitable size . Make:- Cera or equivalent model No 1009 /Hindware/Parryware/ISI equivalent.

PPR Reducer Elbow 32mm x 20mm dia (Make : SFMC/FINOLEX/SUPREME/ISI equivalent)

Urinal Pot Vitreous China bowl urinal pot flat back Model 5004 confirming to IS 771 (Part 3 ) Sec 2 (Make : Cera/Parryware/Hindware/ISI equivalent)

PVC T 110 mm dia (Make :- Prince/Finolex/Supreme/ISI equivalent )

Brass CP jet water spray for EWC. (Make :- ESS ESS/Prayag/Johnson Suisse/ISI equivalent)

PPR Reducer Socket 32-25 (Make : SFMC/Finolex/Supreme/ISI equivalent)

PPR plain socket 20 mm dia (Make : SFMC/Finolex/Supreme/ISI equivalent)

PPR elbow 20 mm dia (Make :- SFMC/Finolex/Supreme/ISI equivalent)

PVC floor tap with grating 100 mm dia

Brass CP Wall Mixer for mixing hot and cold water screwed down for PPR pipe of dia 20mm (Make: Cera/Hindware/Parryware)/ISI equivalent

Brass Chromium plated shower rose 100 mm dia with bend (Make: Ess Ess/Prayag/Johnson Suisse/ISI equivalent)

Electric Geyser 25Ltr

Labour cost on B/R items

E/M items Distribution box 6 way SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS – 8623 double door type. (Make : Havells/Legrand/L&T)

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

MCB SP 6 to 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size' 1” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED mirror lights 1 feet 5 watts (Make : HAVELLS/BAJAJ/PHILIPS/CROMPTON/ISI equivalent)

Steel Screw full thread with rawl plug of 1 1/2" size (ISI Marked) (100 Nos/Pkt)

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex/ISI equivalent)

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make:-Jindal/Tata/Kalinga/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade served with inner PVC sheathing of PVC tape and overall PVC sheathed multi stranded aluminum conductor of size 6 Sqmm twin core (FRLS) confirming to IS 7098 (part-1) 1998 (Make : Havells / Finolex / Polycab/ISI equivalent)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts (Make : HAVELLS/BAJAJ/PHILIPS/CROMPTON/ISI equivalent)

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: Havells/Finolex/Plaza/ISI equivalent)

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/Supreme/Finolex/ISI equivalent)

PVC Round/Squire Block (Make :- Polycab/Supreme/Finolex/ISI equivalent)

Plastic Body fresh air fan with louvers shutter of 200mm sweep model brisk air of Crompton or equivalent model in Havells/Bajaj/Khaitan/ISI equivalent

Cable PVC insulated elecric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4.0 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

Switch socket combination(snow white) multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga/ISI equivalent)

GI wire 4 mm diameter (For earthing).

Charcoal

Salt normal

Labour cost on E/M items

Supply and Construction of Covered Pathway (Job No 2676K) E/M Items PVC tape 19mm wide 5 m long (Make : Steelgrip /Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 3/4” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

Steel screw full thread with rawl plug 1 1/2" size (ISI Marked) 100 Nos /Pkt

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 6 Sqmm 2 (Make : Havells/ Finolex/ Plaza/ISI equivalent)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: Havells/Finolex/Plaza/ISI equivalent)

PVC Round/Square Block (Make :- Polycab /Supreme /Finolex/ISI equivalent)

LED Tube light fittings 18/20Watt box type 4 feets with CRCA body Pre coated white and Prewired for LED tube complete (Make : HAVELLS /BAJAJ/ PHILIPS /CROMPTON/ISI equivalent)

MCB DB SPN double door 6 way with 200 Amp copper bus bar. Make: Havells/L&T/Legrand or of ISI equivalent.

MCB SPN 32Amp. Make: Havells/L&T/Legrand or of ISI equivalent.

MCB SP 5 to 32Amp. Make: Havells/L&T/Legrand or of ISI equivalent.

Switch Piano 5Amp 230V flush type one way (Snow white) (Make-Anchor/SSK/ Cona/ISI equivalent).

PVC Gang box one way suitable fix one way switch 5Amp.

Rechargeable type LED Bulb 10 Watt B-22 type. (Make : Syska/BAJAJ/PHILIPS/ CROMPTON /Havells/ISI equivalent)

PVC Pendant holder. Make; Anchor/Gold star or of ISI equivalent.

Labour cost on E/M items

Suntech Systems Pvt.Ltd. (BID ID -3286093)

M/s Buildcon (BID ID -3287248)

Empresa Inc (BID ID -3286771)