Providing stage and street light pole arrangements for ground and road for barracks A and B, law class room of the existing Permanent Police Recruitment School at Kolliyankulam in Villupuram District..

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

39 : S & F of M.s Grills

41 : Painting - New "iron work"

Electrical arrangements 69 : 16 Amp. Power plug

72 : S & F of Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1: P.C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

9.5.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Ground floor

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

71.3: Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

361.1 : Concrete designer tiles flooring (using crushed stone sand)

ANNEXURE - II A1: Supplying, fabricating and fixing in position of best quality of color coated kerala type roof 0.47mm thick with ISI mark including cost of all materials and fittings such as bolts, bitumen washer and labour charges for fixing etc., all complete, complying with standard specification. a) color coated kerala type

b) Thoomanam

c) Roof Ridge

A2: Supplying and fixing of 8 way vertical type TP MCB DB with Acrylic Door Cover with IP42 Protection with separate neutral and earth busbar links provision of accommodate single/three pole MCB as out going with lable holder and provision taking ug cable single not less than 35 sqmm aluminium armoured U.G cable 1 no of 100 Amps 4 pole ELCB as incoming 5 nos of 63 amps 10KA 4 pole MCB, 8 Nos of 6A-32A 10 KA SPMCB with earth connections cost of all materials etc., all complete and as directed by the departmental officers.

A3: Supply and delivery of 4 core 16 sqmm L.T 1100V PVC aluminium armoured U.G. cable with ISI mark including cost of tansportational charges etc,. all complete and as directed by the departmental officers.

A4: Supply and delivery of 3.5 core 25 sqmm L.T 1100V PVC aluminium armoured U.G. cable with ISI mark including cost of tansportational charges etc,. all complete and as directed by the departmental officers.

A5: Supply and delivery of 3.5 core 35 sqmm L.T 1100V PVC aluminium armoured U.G. cable with ISI mark including cost of tansportational charges etc,. all complete and as directed by the departmental officers.

A6: Supply & fixing of Cable gland suitable for following PVC aluminium armoured LTUG cable etc., all complete. a) Cable Gland suitable for 4 core 16 Sq.mm UG cable

b) Cable Gland suitable for 3.5 core 25 Sq.mm UG cable

c) Cable Gland suitable for 3.5 core 35 Sq.mm UG cable

A7: Labour charges for conveying and laying of UG cables below ground level including earth work excavation and refilling and providing sand cushion, brick layer protection etc., all complete for UG cable of size 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A8: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 95 Sq.mm and 2, 3, 3.5, 4 core with necessary MS clamps and brass screws including cost of all materials and redoing the dismantled portion in to the original position etc., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers. (Above G.L)

A9: Supplying and fixing of L.T cable route indicator including earth work excavation connected civil works for fixing etc., all complete and as directed by the departmental officers.

A10: Run off mains with 4 wires of 10 Sqmm copper PVC insulated unsheathed single core 1.1KV cable wire contuinuous earth by means of 6 Sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable in fully concealed 19 mm / 20 mm dia rigid PVC conduit pipe heavy duty with ISI mark including cost of all materials, specials, etc., all complete.

A11: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A12: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) - Can be fitted in outside wall with 1320 lumens of light output and etc., Charges for fixing 25W LED lamp street light fittings

A13: Supply, Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 250 x 250 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 140mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron etc., all complete and as directed by the departmental officers.

A14: Supplying and fixing of 150 Watts (LIGHT EMITTING DIODE) LED lamp with street light fittings (Higher End) - Can be fitted in outside wall with 1320 lumens of light output and etc., using 25mm dia GI "B" Class pipe for 1.50m length including cost of all materials, labour charges for fixing of LED street light fitting etc all complete.

A15: Supplying and fixing of 48 Watts (LIGHT EMITTING DIODE) LED lamp with street light fittings (Higher End) - Can be fitted in outside wall with 1320 lumens of light output and etc., using 25mm dia GI "B" Class pipe for 1.50m length including cost of all materials, labour charges for fixing of LED street light fitting etc all complete.

A16: Supply and fixing of 63A TPN Disconnection fuse units in sheet steel enclosure with HRC fuses Double break sheet enclosure weather proof 16G sheet powder coat finish of size 300x200x100mm including necessary inter connection and earth connection, cost of all materials, bolts, nuts and labour charges etc., all complete and as directed by the departmental officers.

A17: Supply and fixing of Synthetic Moulded Compound Box for Street Light 1No of 16A fuse 4 Way DB 16 Amps / Way with Fuse & Neutral each (250V) TW plank 200 x 150 x 20 mm for fixing the unit including required fabrication,powder coat paint finish with necessary fixing clamp / welding etc., all complete and as directed by the departmental officers.

A18: Supplying and laying of 65mm dia GI pipe 'B' class including cost of pipe and labour charges etc., all complete and as directed by the departmental officers.

A19: Supplying and fixing of 3 Nos. 100 AMPS, 500 volts grade well procelain fuse unit on a suitable good quality Teakwood plank to be fixed on the pole / EB street poles with necessary M.S clamps bolts, nuts washers including cost of all materials & labour charges etc,. all complete and as directed by the departmental officers.

A20: Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., all complete and as directed by the departmental officers.

SSV DEVELOPERS (BID ID -1231427)

K.Saravanan (BID ID -1234267)

NEDUNCHEZHIYAN RAJA (BID ID -1233401)

dp constructions (BID ID -1233694)