Constructionof4beddedBMTwards

Amount

CEMENT CONCRETE (CAST IN SITU Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

REINFORCED CEMENT CONCRETE CAST IN SITU Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

FORM WORK. Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Lintels,beams, plinth beams, girders,bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

BRICK WORK HALF BRICK MASONRY Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorV level. Cement mortar 1:3 (1 cement :3 coarse sand

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. SIZE= 600X600

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

WOOD WORK Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):Rectangular or square

Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm

Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer?in-charge Extruded section profile size 42x50 mm

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.Ifasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

STEEL WORK Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

HAND RAILING Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required)and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 1200 mm

Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-ChargePolished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

FINISHING 12 mm cement plaster of mix : (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : (1 cement: 4 fine sand)

Neat cement punning.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats

EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

RAIN WATER PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler. 12.42.1.1 = 75 mm

Single pushfit Couple 12.42.2.1 = 75 mm

Single tee with door 12.42.3.1 = 75x75x75 mm

Single tee without door 12.42.4.1 = 75x75x75 mm

Bend 87.5° 12.42.5.1 = 75 mm bend

12.42.5.2 = 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:R.S. Joists

Channels, angles, tees and flats

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Finishing walls with indoor Anti-Bacterial paint with properties : a. Drying time: Surface dry time 30 minutes, b. Recoatability: 4 – 6 hours @ ambient condition (25ºC/65% RH), c. Sheen at 60ºGH: 8 – 10 units , d. VOC (ASTM D 3960): < 50 gm/lit e. Meets Green assure requirements, f. Flash point: Not applicable, g. Stability of Thinned Paint: Use within 24 hours. Make : Asia paints Royale Health Shield Emulsion Paint.

Providing , fitting and fixing Cabinets made of BWR Grade ply board, sunmica fitted with fitting, complete in all respect as specified and directed by the Department.

Metaflex make PPGL(Pre Painted Galvanized Steel) Insulated Clean Room Door having Double Leaf with 44 mm Door panel thickness and 0.6 mm PPGL skin on both sides with pressure injected High Grade PU(density 45kg/m3) as Door Blade core material, Door Wall Frame PPGL, Rubber Gasket Non Particle Shredding Type Seal, Concealed Drop Seal, Double Insulated Glass Vison panel 300x300mm, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage. Size : 1200 x 2100 mm

Metaflex make PPGL(Pre Painted Galvanized Steel) Insulated Clean Room Door having Single Leaf with 44 mm Door panel thickness and 0.6 mm PPGL skin on both sides with pressure injected High Grade PU(density 45kg/m3) as Door Blade core material, Door Wall Frame PPGL, Rubber Gasket Non Particle Shredding Type Seal, Concealed Drop Seal, Double Insulated Glass Vison panel 300x300mm, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage. Size : 1000 x 2100 mm

Metaflex make PPGL(Pre Painted Galvanized Steel) Insulated Clean Room Door having Single Leaf with 44 mm Door panel thickness and 0.6 mm PPGL skin on both sides with pressure injected High Grade PU(density 45kg/m3) as Door Blade core material, Door Wall Frame PPGL, Rubber Gasket Non Particle Shredding Type Seal, Concealed Drop Seal, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage. Size : 1000 x 2100 mm (Without Vision Panel)

Supply & Installation of Static SS UV PASS BOX of Size 750x750x750 with specifications as follows: MOC : SS-304, 20 Gauge, 1mm Thickness , Indicator & buzzer is provided for door interlocking signal, DOOR INTERLOCKING SYSTEMS, DOOR OPENING WITH SOLID STATE ELECTRONIC, UV & FL LIGHTS , SS- HINGES , SS-HANDLE, POWER SUPPLY PHASE : 220-230 V AC/ single phase / 50Hz,u.v light with hour meter used for bacteria/viruskilling, support stand for mounting of pass box, electro-magnetic / mechanical interlocking.

Supply & Installation of SCRUB STATION SINGLE TAP, SIZE: 600x600x850+400mm, Entire Body is made in S.S & full wide, 350mm deep sink w/perforated false bottom shelf. Top & sink in 18 ga S.S with 22ga side covering front pannel in 22 ga. Unit is with 1nos elbow operated water faucet & Front body is with screw tight openable flaps for underneath washing. Operation : Elbow operated.

Finishing walls with SmartCare Apcoflor WPF 200 Hygienic Wall Coating, Single pack, fast drying, hygienic, water based polyurethane dispersion wall finish. Recommended DFT/ Coat:75 microns, . Make : Asia paints Royale Health Shield Emulsion Paint.

PLUMBING WORKS SANITARY INSTALLATIONS Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous china flat back half stall urinal of size580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Kitchen sink without drain board 470x420 mm bowl depth 178 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder : C.P. Brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

CPVC PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

C.P. BRASS FITTINGS Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing gun metal gate vlve with C.L wheel of approved quality (Screwed end) 25 mm nominal bore

50 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

PVC PIPES, BENDS, JUNCTIONS, TEES ETC. Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (i) 110mm dia.

(iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

(iv) 75 mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (i) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(iv) 75 mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (i) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(iv) 75 mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(iv) 75 mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages (ii) 110mm dia.

(ii) 75 mm dia.

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(ii) 75mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (ii) 110mm dia.

(ii) 75 mm dia.

Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 110 mm x 75mm

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (ii) 110 mm x 75mm

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 110 mm x 75mm

(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. (ii) 110 mm x 75mm

Supplying fiting and fixing PVC socket plug (End Cap) of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. (a) 110 mm

Relocation of Existing Water Filtration Plant to terrace Floor.

Providing and fixing C.P. brass Elbow Action Pillar Cock Faucet confirming to IS standards.. 15 mm nominal bore

ELECTRICAL WORKS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 1 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

Triple pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A

Earthing with G.I. earth pipe 4.5 Metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

4 WAY VTPN DB: Supplying with fitting and fixing MCCB incomer and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting 4 way vertical TPN MCB DB incorporated with bas-bar up to 160A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

Supplying with fitting and fixing MCB/RCCB/MCCB in existing Distribution Boxes with making necessary connection as approved, specified and directed by the deptt. 63A 4P 10 KA 415V 50Hz 'C' Curve MCB

40A 4P 10 KA 415V 50Hz 'C' Curve MCB

63A 4P RCCB 100mA sentivity

63A 4P 16 KA 415V 50Hz MCCB Thermal Magnetic Protection

ONE WAY MCCB ENCLOSURE: Supplying with fitting and fixing 160A 4P 25 KA 415V 50Hz MCCB thermal Magnetic Protection in Weatherproof (IP65) Enclosure with making necessary connection as approved, specified and directed by the deptt.

ONE WAY MCCB ENCLOSURE 250A 4P MCCB 36 KA: Supplying with fitting and fixing 250A 4P 36 KA 415V 50Hz MCCB thermal Magnetic Protection in Sheet Steel Enclosure with making necessary connection as approved, specified and directed by the deptt.

Supply of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable as specified and directed by the deptt. 25 Sq. mm. 3½ Core armoured U.G. cable

95 Sq. mm. 3½ Core armoured U.G. cable

185.00 Sq. Mm 3½ Core armoured U.G. cable

Supply, installation and testing of 10W Bulkhead fittings of make Wipro Model Bulkhead LW07 Cat No. LW07-141-XXX-57-G1 10W or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor and all accessories as required and as directed. [BKH]

Supply, installation and testing of 20 W LED Pure polyester UV resistant powder coated die cast aluminium housing with PMMA clear diffuser for uniform illumination Post Top Lantern of make Wipro Model Post Top LP07 Cat No. LP07-251-XXX-57-CL 20W or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed. [PTL]

Supply, installation and testing of 30 W LED Surface Mounted LED Bottom Opening Cleanroom Luminaire Luminaire consisting of precisely manufactured, CRCA powder coated Housing and CRCA Bottom frame fixed with captive (loss proof) screws Satin finish high efficiency translucence (HET) diffuser sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing, Bottom frame and diffuser, with gasket and pressure clamps to ensure dust proofing with perfect bottom frame alignment and hinging, Surface finish in epoxy polyester powder coating lends, prewired Driver upto terminal block of make Wipro Model VISION LED (LC22) Cat No. LC22-411-XXX-40-G2 30W or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed. [CLR]

Supply, installation and testing of 9W LED Recessed downlight with pressure die-cast aluminium housing for effective thermal management and high transmission factor PMMA diffuser for better performance of make Wipro Model Helios LD90 Cat No. LD90-111-XXX-30-XX 9W or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor . Rate to include cost of lamps. [CL]

Supply, Installation, Testing and Commissioning of Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution of make Havells Model TRIM COSMO SURFACE SQUARE Cat No. LHEAAKP6IL1W024 24 W LED 4000 K or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor including lamps, drivers etc. with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required complete. [CLT]

Supply, Installation, Testing and Commissioning of LED Extruded Aluminium batten available in 2ft & 4ft run length with multiple lumen packages and suitable for Surface, Wall & Conduit mounting (with accessories).of make Philips Model SmartBright Cat No. BN021C LED22S PSU CW GR or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor, including lamps, drivers etc. as required complete. [TL]

Supply, Installation, Testing and Commissioning of LED Skirting Light in 3 module Modular Box with FacePlate etc. complete of make Legrand Model Myrius Cat No. 6730 36 or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor, including lamps, drivers etc. as required complete. [SKL]

Supply, Installation, Testing and Commissioning of IO Port suitable for UTP CAT-6 in 1 module Modular Box with FacePlate etc. complete of make Legrand Model Myrius Cat No. 6730 55 or equivalent with necessary support and connection etc. as required complete. [LAN]

Supply, Installation, Testing and Commissioning of 1x10 W LED Lamp for batten holder. [BK]

Supply, Installation, Testing and Commissioning of 1200 mm sweep Ceiling Fans with connection of make Orient Model SUMMERKING (Xl Aluminium Blades) or equivalent

Supply, Installation, Testing and Commissioning of 450 mm sweep Wall mounted Fans with connection from existing 6A socket outlet (rate for socket and connection to the socket to be taken separately)

Supply, Installation, Testing and Commissioning of 300mm sweep Exhaust Fans with connection from existing 6A socket outlet (rate for socket and connection to the socket to be taken separately) of make Orient Model 300 mm Spring Air or equivalent.

MAIN LT PANEL

Supply, Installation of Water Heater (Geyser) Capacity: 15 Litres; Wattage: 2000 Watts; Pressure: 8 Bars ; BEE Rating: 5 Star;Waterproof Degree : IPX-4 Protection. Make : Havells Monza EC 15-Litre Vertical Storage Water Heater (Geyser) with Flexi Pipe.

Supply, Installation of 2 Pair of Hand Glows, First Aid Box, Acrylic Sheet Board afety instruction charts to be provided inside electrical room.

Supply, Installation of Door Access control system at main entry and exit door with folowing specifications of reputed brand : Door Access control system with Fingerprint, Card, Wi-Fi and Cloud system,Storage : 3000 Fingerprints, Cards and Passwords of Users with 1,00,000 Transaction Capacity,3 communication ports USB , TCP/IP, Wi-Fi.

FIRE WORKS Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal:

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 50 mm dia

80 mm dia

100 mm dia

150 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 150 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 M

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 3 way - 150 mm dia M.S. Pipe

SPRINKLER SYSTEM Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1200mm

MEDICAL GAS PIPELINE SYSTEM WORKS: Supply and installation,Testing & Commissioning of O2 outlet with Probes/Adaptes as per CE marked.

Supply and installation,Testing & Commissioning of BPC FLOW METER(0-15l/m) WITH HUMIDIFIER BOTTLE Assembly with Probe.

Supply and installation,Testing & Commissioning of high pressure tubing flexible having antistatic core as per Iso standard with proper colour coded for O2 ,Compressed air complete all as spesified and as directed

Supply and installation,Testing & Commissioning of AIR 4 outlet withwith Probes/Adaptes as per CE marked.

Supply and installation,Testing & Commissioning of Vaccum outlet withwith Probes/Adaptes as per CE marked.

Supply and installation,Testing & Commissioning of ward vaccume unitas per CE Marked with Regulator along with vaccume gauge,collection jar of 600 ml

Supply and installation,Testing & Commissioning of Theatre Suction Trolley unit with two 1000 ml collection Jars.

Copper Pipes as per medical Grade 12 mm od X.7mm thickness

15mm od X .9mm thickness

22mm od X9mm thickness

28mmX.9mm thickness

Supply and installation,Testing & Commissioning of zonal valve box

Supply and installation,Testing & Commissioning of area line pressure alarm

Supply and installation,Testing & Commissioning of isolation valves with brass body with nickel plate valve operating handle suitable for 12mm Od copper pipe to 42mm Od copper pipes with brass adapter as per standard spesification all as spesified and sirevted for the following isolations 12 mm od X.7mm thickness

15mm od X .9mm thickness

22mm od X9mm thickness

28mmX.9mm thickness

Low pressure tubings

Supply and installation,Testing & Commissioning of Bed Head Panel 5ft Long CE Marked . These are panels as per customer choice of colour to maintain the aesthetics of the hospital along with accessories like 1No. Of IV hook 1.no. of utility BP Bsasket 1 No. of Monior tray 1 No of Aluminium Clamp for ward vaccum Unit out let of Oxygen-2 nos, Vacuum – 2 Nos , and Air -1 and 5 no. of 5/15 amp Anti bacterial Switch and sockes , 1 nos LAN ,1- nos telephone socket

NURSE CALL SYSTEM WORKS Supply, Installation, Testing & Commissioning of Medisystems "CE Certified & NABH Approved" Nurse Call System

16-Line, Central Display Unit

Standard Bed Unit

Standard Handset

Toilet Pull Cord Unit

Emergency Alert, Reset Unit

Door Display Unit

Cat 6 Cabling in PVC Conduit

CCTV WORK: SSupply, Installation, Testing & Commissioning of CCTV camera in all common ares. UTP Cat Cable 5/6

IP Bullet 4MP 30MTR IR

24 Port POE Switch

16 Channel NVR

R J 45 Cable Connector

21 Inch Led Monitor

HDD 2 TB Surveillance

FIRE ALARM SYSTEM WORKS Supply, Installation, Testing and Commissioning of Analogue Addressable optical smokedetector & response indicators with built in fault isolator, response indicator having open digitalprotocol,alarm flag for fast alarm reporting, alarm address for fast location of alarm, red LED alarmindication clear during quiescent state, operating temperature -20 ̊C to + 60 ̊C, humidity 0 - 95% RH(non condensing), digital protocol for error free transmission, unique address mechanism for datastorage in the base to ensure high reliability all as per specifications etc as required. (Make: MorleyIAS, Gent, Esser, Bosch, Siemens, Edwards)

Supply, Installation, Testing and Commissioning of Analogue Addressable rate of risetype Heat detector with built-in fault isolator, having open digital protocol, alarmflag for fast alarm reporting, alarm address for fast location of alarm, red LED alarmindication clear during quiescent state, operating temperature -20 ̊C to + 60 ̊C,humidity 0 - 95% RH( non condensing), digital protocol for error free transmission,unique address mechanism for data storage in the base to ensure high reliability all asper specifications etc as required. (Make: Morley IAS, Gent, Esser, Bosch, Siemens,Edwards)

Supply,Installation,Testingand Commissioning of Analogue Addressable loop sounders having continuous orpulsed tone,having output power of 85-Dba at1meter,digital protocol compatible,etc as required.(Make:MorleyIAS,Gent,Esser,Bosch,Siemens,Edwards)

Supply,Installation,TestingandCommissioningofAnalogueAddressablePullDowntypeManualCallPointsuitableforreportingitsaddresses,interruptingtheloopandproducingalarminlessthan0.2seconds,completewithREDLEDasalarmindicatoretc as required.(Make: Morley IAS, Gent, Esser, Bosch, Siemens, Edwards)

Supply,installation,testing & commissioning of Microprocessor based 2 wire fault tolerant loop,networkable type,with each loop capacity of minimum 99 detectors and 99 modules,firealarm/detection controlpanel.The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes.Further,the panel must be able to automatically switch ON/OFF respective control module whenever any alarm is triggered.The panel shall have rectifier,Loop cards,minimum 80 character LCD unittoindicate Fire/Fault Signal with address and analog output,external/in built printer to logall fire or fault events complete in all respects.The Panel Shall housed in a Powder coated CRC enclusure selaed to IP30.The Panel Shall have 20 Zones with Individual LED Indicators,expandable to 80LED Indicators.The Panel Shall have 3 Serial Ports.

Supplying,drawing,connecting,testing&commissioning of 2corex1.5sq.mm.multi stranded copper conductor,pvc insulated PVC sheathed,cable suitable for FireAlarm System.(Make: Havels, Polycab, Crystal, Gloster, Finolex,RR)

HVAC WORKS AIR-COOLED CHILLER Supply, Installation, Testing and Commissioning of Air cooled scroll chilling machines having actual capacity of 34 TR at chilled water inlet/ outlet temperature of 12.0 deg. C / 7 deg. C having evaporator fouling factor of 0.000018 m2.k/w with chilled water circulation rate of 340 LPM nominal suitable for operation on refrigerant R- 407C comprising the following complete as required. Chiller capacity should not less than 34 TR ( Following safety factor will inbuilt with chiller unit- SPPR, Under/Over load protection, Phase reverse protection, HP/LP trip signal interlocking, Auto/Manual Test mode facility/ Run time equalization for multiple compressor, Password access for authorized handling, PT-100 RTD sensor for chiller unit, Interlocking for chilled water flow switch) ( 1Working+1Standby)

Chilled Water Pumps Supply, Installation, Testing and Commissioning of back pull out type centrifugal chilled water pump set capable of delivering 100 USGPM of water. a) 1 No. - Pump with bronze impeller, S.S Shaft, CI body and mechanical seal. b) Duly insulated with 19 mm thk, 32 kg/cum density close cell nitrile rubber insulation cladded with aluminium sheets of 0.5mm thickness and properly clamped to pump in two semi-circular sections as per specifications. c) 1 No. Suitable HP, TEFC squirrel cage induction motor with class 'F' insulation (IE-2), 1450 RPM synchronous speed, operating on 415 ± 10 % Volts, 3 phase, 50 Hz A.C. supply. Minimum Efficiency 75%. d) CI/GM casing and Gunmetal bronze Impeller, Pump Shaft SS rating PN-16 Flush line braided SS, Outside balanced mechanical seal, SS springs and along with double sphere flexible connectors with flange for pipe connection etc. 100 USGPM of water against 20 M head (1 Working + 1Standby)

AIR HANDLING UNITS Supply, Installation, Testing and commissioning of factory built floor mounted -double skin type horizontal/vertical air handling units made of 43+2mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and 0.8 mm plane GI at inside layer with CFC-FREE P.U. insulation of density 42(+5%) kg/m3 factory injected between them by injection moulding machine, complete with DIDW backward curved centrifugal fan with VFD Starter Driven, suitable for 150 mm WG static pressure, coil section with aluminium finned copper tubes (tubes thickness not less than 0.41mm) cooling coil of 6 row deep, filter section with 50mm thick washable synthetic type air prefilters & fine filter (MERV-13), belt drive package with TEFC drive motor suitable to operate at 415 ± 10% volts, 50Hz, 3 Phase AC supply, motor should be compatible with VFD, drain connections, stainless steel (18G) drain pan, necessary vibration isolation pads & accessories:aust piping as per the norms duly insulated with requires thick nitrile rubber. AHU starter panel should have VFD and VFD bypass option, should have PLC based control and PLC bypass control for manual mode (1 Working + 1 Standby) 9000CFM / 17TR External Static@150mmWC

AIR HANDLING UNITS Supply, Installation, Testing and commissioning of factory built floor mounted -double skin type horizontal/vertical air handling units made of 43+2mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and 0.8 mm plane GI at inside layer with CFC-FREE P.U. insulation of density 42(+5%) kg/m3 factory injected between them by injection moulding machine, complete with DIDW backward curved centrifugal fan with VFD Starter Driven, suitable for 125 mm WG static pressure, coil section with aluminium finned copper tubes (tubes thickness not less than 0.41mm) cooling coil of 6 row deep, filter section with 50mm thick washable synthetic type air prefilters & fine filter (MERV-13), belt drive package with TEFC drive motor suitable to operate at 415 ± 10% volts, 50Hz, 3 Phase AC supply, motor should be compatible with VFD, drain connections, stainless steel (18G) drain pan, necessary vibration isolation pads & accessories:aust piping as per the norms duly insulated with requires thick nitrile rubber. AHU starter panel should have VFD and VFD bypass option, should have PLC based control and PLC bypass control for manual mode (1 Working + 1 Standby) 8500CFM / 16TR External Static@125 mmWC

PIPING WORKS- CHILLED WATER PIPING SITC of Chilled water piping out of M.S heavy class ERW C-class pipe ( Pressure rating PN-16) confirming to relavent IS 1239 code upto 150 mm dia pipes, with necessary fittings tik wood gutties for indoor and hard puf blocks for outdoor pipes, elbow, tees, reduces, suitable GI supports, clamps anchor fastners, tie rod, brackets, nut /bolt etc as specified all indoor supports shall be painted with two coats or red oxide and two coats of enamel paint. All outdoor supports shall be painted with two coats of Zinc chromate paint and two coats of enabmel paint. 80 mm dia.

50 mm dia.

32 mm dia.

25 mm dia.

PIPING INSULATION WORK Suppling, laying, fixing, testing and commissioning of following nominal sizes of pipe insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat setting adhesive (CPRX compound) wrapping with 500g polthene faced hessain and finally applying 26G aluminium sheet cladding complete with in all respect. 80 mm dia.

50 mm dia.

32 mm dia.

25 mm dia.

BUTTERFLY VALVE- Supplying, fixing, testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body, SS disc, nitrile rubber seal & O - ring & PN 16 pressure rating as specified. 80 mm dia

50 mm dia .

40 mm dia.

BALL VALVE- Supply, Installation, Testing and commissioning of following set of ball valve with bronze body SS Disc, suitable for PN 16 pressure rating for chilled water circulation. 25 mm dia.

BALANCING VALVE SITC of insulated CI Balancing Valve flanged ends of pressure Rating PN-16, Complete with SS-410 stem and disc, EPDM Sealing disc, Gaskets, end flanges /Matching flanges, thermal insulation, additional supports, fixing accessories, nutbolts as per relevent standards and specification. 80 mm dia

50 mm dia

NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled water circulation including insulation. 80 mm dia.

Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including insulation. 80 mm dia .

50 mm dia

THREE-WAY MOTORIZED VALVES & THERMOSTAT Three Way Motorised Valves for controlling of water temperature for air handling units -40mm

PRESSURE GAUGE- Providing and fixing of 6'' dia of Pressure gauge with ball valve and SS syphon to be considered and necessary fittings.

TEMPERATURE GAUGE-Providing & fixing of 6'' dia of Temperature gauge with Thermowell and necessary fittings.

MAGNEHELIC GAUGE for BMT room

FLOW SWITCH- Supply, Installation, testing and commissioning of Flow Switch with accessories as required.

Auto Air - purge valve of 20 mm dia (Air Vent will be fitted with an isolating ball valve)

FLEXIBLE CONNECTIONS Supply ,Installation ,Testing and Commissioning of Flexible connector for following Dia. pipe suitable for PN 16 pressure rating to be installed at pump suction & discharge 80 mm dia.

EXPANSION TANK Supply, Installation, Testing of open type expansion tank of MS Construction made of 6 mm thick mild steel sheet duly insulated with 50mm thick T.F quality expended polystyrene of 24 kg/cum density covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 26G aluminium sheet cladding complete with vent and outlets for system connection over flow and drain 25 mm dia. Make up connection with float valve, drain valve. 500 X 500 X 500 mm

AIR DISTRIBUTION WORKS Supply, Installation, Balancing and Commissioning of Site fabricated Aluminium sheet metal rectangular ducting with supports, neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following gauges. Thickness 26G for exposed duct cladding.

Thickness 0.80 mm sheet

Thickness 1.0 mm sheet

SECTION - V : INSULATION - Acoustic Lining of Ducts Supply, Fixing & Testing of open cell nitrile rubber acoustic insulation, with density 140-180 kg/cum. and having anti fungal & anti bacterial properties as per DIN EN ISO 846, MATHOD A&C.

Thermal Insulation Supplying and fixing of following thickness duly laminated aluminium foil face of mat fininshed closed cell Nitrile rubber insulation on duct after applying one coats of cold setting adhesive (The joints shall sealed with 50mm wide and 3 mm thick self afhesive nitrile rubber tape insulation complete with all respect. 32mm thick Al foil faced nitril rubber for supply air duct

19 mm thick Al foil faced nitril rubber for supply air duct

VOLUME CONTROL DAMPER- Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

SUPPLY AIR GRILL- Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers

SUPPLY AIR GRILL-Supplying & fixing of powder coated extruded aluminium Return/Exhaust Air Grills with louvers but without volume control dampers complete as required.

SUPPLY AIR DIFFUSER- Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

RETURN AIR DIFFUSER- Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

FIRE DAMPER- Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Fire damper.

Actuator with necessary transformer & control wiring

HEPA FILTER Supply, Fixing & Testing of hepa filter of 99.7% Eff -wn - 0.3 micron with laminar flow Miniplate hepafilter - 600x600x305mm,

LAMINOR BOX CHAMBER/HEPA MODULE Supply & fixing of Hepa Filter module in CRCA powder coated finish side inlet type, with provision for DOP, pressure drop measurement along with volume control Damper ( Bottom Operated) and provision for a flange type Hepa filters. SS304 perforated plate to be fixed at supply side.

STRIP HEATER- Supply, Installation, Testing & Commissioning of Strip Heater Bank Chamber comprising of SS 304 spiral strip heaters fitted with Porcelene blocks, Safety air stat with control Accessaries thermo stat & humidisat. 11 KW

SMOKE EXHAUST TUBE AXIAL FLOW FAN FAXF-F SERIES- Adjustable/ Controllable pitch Impeller, fire rated for 4000C 30mins, 3000C 2 Hours, Direct driven type of capacity 8000CFM@40mm WC static pressure.

IT WORKS Apw Flexi Box Wall Mount Rack 12U 19"X 500Mmd Networking Wall Mount Rack With Front Tinted Glass Door With Lock "Pdu 6*5A - 01 Nos. Fan 90 Cfm 230V - 01 Nos. Mounting Hardware (Set Of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos." As Directed & As Approved By The Deptt.

Supply, Installation Testing And Commissioning Of Following Lan Networks Equipments. Solid Copper Cable Cat 6, 4 Pair, Utp - 305M Schneider/Legrand/Dlink/Comscope Or Equivalent Make As Directed & As Approved By The Deptt.

Supply, Installation Testing And Commissioning Of CISCO POE access switch 24 port ( 1Gbps port speed) . MAKE:CISCO/NEATGEAR Or Equivalent Make As Directed & As Approved By The Deptt.

Supply, Installation Testing And Commissioning Of IO SMB & Face Plate As Directed & As Approved By The Deptt.

Supply, Installation Testing And Commissioning Of Patch Panel Cat 6 Utp Keystone -48 Port- Loaded Schneider/Legrand Or Equivalent Make As Approved By The Deptt..

Supply, Installation Testing And Commissioning Of 2KVA UPS.

Supply, Installation Testing And Commissioning Of RJ 45 Connector.

Supply, Installation Testing And Commissioning Of Patch Cord Cat 6 Utp 2M - Moulded Schneider/Legrand/Dlink/Comscope Or Equivalent Make As Approved By The Deptt..

Supply, Installation Testing And Commissioning Of Patch Cord Cat 6 Utp 1M - Moulded Schneider/Legrand/Dlink/Comscope Or Equivalent Make As Approved By The Deptt..

Supply And Fixing 25 Mm Dia 2.00Mm Average Wall Thickness Heavy Rigid Pvc Is: 9537 Part - Iii Conduit (Berlia/ Akg / Precision/ Presto Plast/Polycab/ Mw Or Equivalent Make As Approved By The Deptt.) In Recessed System Including Cutting The Wall And Making Good The Same As Required and Approved By The Deptt..

Supply, Installation Testing And Commissioning Of HP MFP M128fw LaserJet Pro Printer with following specification : Printer Output Type: Monochrome , Printing Technology: ‎Laser , Connector Type: ‎USB, Network , Or Equivalent Make As Approved By The Deptt..

Supply, Installation Testing And Commissioning Of PC set with following specifications : PROCESSOR: 12 Gen Intel® Core™ i7-12700, RAM: 8 GB, DDR4,HARD DISK : 3.5 inch 1TB 7200 RPM Hard Disk Drive, 64 MB cache, WINDOWS: Windows 10 Pro /DOS, MONITOR: 22 INCH,Full HD (1080p) 1920 x 1080 at 60 Hz,BRAND: DELL/HP/LENOVO or approved Make As Approved By The Deptt.

Supply, Installation Testing And Commissioning Of 1KVA UPS for PC of approved Make As Approved By The Deptt..

Supply, Installation Testing And Commissioning Of EPBX Intercom System for 8 line Intercommunication including connecting wire,Landline Phone etc all complete of approved Make As Approved By The Deptt..

Supplying installation, testing, programming and commissioning of Audio equipment, 4 Channel Power Amplifier, 240 W per channel @ 8 ohms of make : Bosch/Crown or equivalent make as Approved By The Deptt.

Supplying installation, testing, programming and commissioning of Audio equipment,microphone - 30/ 50 cm microphone without base of make hypercardiod/ Cardioids gooseneck or equivalent make as Approved By The Deptt.

Supplying installation, testing, programming and commissioning of Audio equipment, Compact PA Wall Speaker 6 Watts of make Bosch/Ahuja/JBL or equivalent make as Approved By The Deptt.

Supplying instatllation, testing and commissioning of stainless steel automatic hospital bed cum passenger elevatior having contract speed of Metre/Sec (approx.) mps serving different floor in the existing life shaft as per detailed specification as per companyu, having following additional features. Make & Model as directed by the department No. of floor - 4 nos (GF to 3rd floor) ARD facility Automatic and multiray electronic door detecting sustem door stainless steel car in hairline finish Battery operated alarm bell and emergency light Overload warning device Voice synthesizer, Etc. 15 passenger (1020 kg)

VERSHA TECHNOTRADE PVT LTD

INTEGRA VENTURES