SPL REPAIR TO BLDG NO P 67 (JCO ACCN) OF 1ST BN SIKKIM SCOUTS AT ALGARAH AND SPL REPAIR TO BLDG NO P 95 (AMN STORAGE) AT AP ALGARAH UNDER GE 867 EWS

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S & F pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S & F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC drop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC stop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and as directed.

Fixing only of structural mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section), complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165, complete all as specified and as directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), complete all as specified and as directed.

Demolition of reed, lathing, single or Double and plaster or chicken wire lathing on walls all as specified and directed, complete all as specified and as directed.

Demolition of precast concrete block walling and precast concrete articles etc, built in cement mortar, complete all as specified and as directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded crushed stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM (1:6), complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed.

M&L for reinfored cement concrete (nominal mix) in (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5m span, complete all as specified and as directed.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete, complete all as specified and as directed.

M&L precast RCC (1:2:4) mix, type-B-1, (using 20mm grade crushed stone aggregate) as in cover slab including necessary formwork set in CM (1:4), complete all as specified and as directed. Note: reinforcement shall be measured and paid separatly

M & L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed.

M & L mild steel TMT Bars 6mm to 8mm mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed.

Point

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated, complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M/L for 10mm thick rendering CM (1:6) on other than fair faces of brick or concrete surfaces of internal walls finished even and smooth without using extra cement, complete all as specified and as directed.

M & L 10mm thick rendering on fair faces of brick work concrete surface in CM (1:4) on external wall even and fair with WPC and WPC mrasured separately, complete all as specified and as directed.

Supply only integral water proofing compond all as specified and as directed, complete all as specified and as directed.

M & L for Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for three coats of white wash on newly prepared internal and external wall surfaces, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical suface like, dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L 100 mm thick PCC type D-2, (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base of floor, path etc, complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth using extra cement, complete all as specified and as directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (Using 40mm graded crushed stone aggregate) as in base of floor, path, plinth protection etc, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets, complete all as specified and as directed.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed.

M&L 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing, complete all as specified and as directed.

Taking down chowkhats or frame n.exc 1.50 Sqm and each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed.

S&F 4mm thick sheet glass, oridinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate etc, complete all as specified and as directed.

S & F factory made 30mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.180mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

S & F 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed.

M&L for 1.6mm thick MS Plates (plain or chequered) channels, in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts;square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed.

Supply only 300mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.

Supply only 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0, complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F in repairs 20mm di

a curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc, complete all as specified and as directed.

M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome, complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

S&F of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia, complete all as specified and as directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) B0, in Damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.

M&L 100mm thk Cement concrete type B- 2, (1:2:4) (40mm graded crushed stone aggregate), complete all as specified and as directed.

Supply and fix, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor, complete all as specified and as directed.

S&F, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets, complete all as specified and as directed.

Supply and fix, vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand, complete all as specified and as directed.

Supply only, 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes, complete all as specified and as directed.

S&F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs, complete all as specified and as directed.

Supply & fix, brass cromium plated shower roses 125 mm size with or without swivel joint, including fixing to steel pipe or union, complete all as specified and as directed.

Supply and fix,15 mm bore stop valves best copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plate (concealed type), complete all as specified and as directed.

Supply and fix ,Towel rail 450 mm long of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleat ( min weight 170 gms), complete all as specified and as directed.

S&F LPDE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash hand basin, complete all as specified and as directed.

S&F PVC connection 15mm dia sizes with PTMT nuts of length 450 mm, complete all as specified and as directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

S&F in repairs High density polythene pipe(HDPE)of pressure rating 6 Kgf /Sq cm fixed comp to wall or laid in tranches or under floors.(50 mm bore) incl all fittings, complete all as specified and as directed.

S & F for PVC (SWR) pipes 110 mm dia in any length with rubber ring joints, complete all as specified and as directed.

S & F for PVC (SWR) pipes 75 mm dia in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F PVC vent cowl 75 mm bore, complete all as specified and as directed.

S & F PVC bend 110mm dia, complete all as specified and as directed.

S & F PVC bend 75mm dia, complete all as specified and as directed.

S & F PVC (SWR) P traps bore 125/110 mm dia, complete all as specified and as directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and as directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

M & L Chequered cement concrete tiles 20cm x 20cm x25 mm thick set jointed with grey pigment cement and pigments in neat cement slurry including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier hole

s, & for LT under ground cable/pole foundation etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft & Loose soil, complete all as specified and as directed.

Returing filling in including spreading levelling watering and well ramming in layers n.exc 25 cm thick with soil obtained from excavation, complete all as specified and as directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and as directed.

M&L PCC (1:3:6) type C-2, (Using 20mm graded crushed stone aggregate) Concrete bed to drain pipes of size 110mm/100mm including packing under, and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and as directed.

Demolition and breaking100/110mmold broken PVC, (SWR) AC, SWG soil waste and vent pipe including accessaries set in CM and removing rubbish from site, complete all as specified and as directed.

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified in SSR Part I, complete all as specified and as directed.

S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch, complete all as specified and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 117 here-in-before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire, complete all as specified and as directed.

All as per serial item No. 117 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane, with cables, 1.5 sq. mm size, complete all as specified and as directed.

All as per serial item No. 117 here-in-before but on independent board, complete all as specified and as directed.

All as per serial item No. 117 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board, complete all as specified and as directed.

All as per serial item No. 117 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size, complete all as specified and as directed..

S&F modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked, complete all as specified and as directed.

S&F modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked, complete all as specified and as directed.

S&F modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked, complete all as specified and as directed.

S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI, complete all as specified and as directed.

S&F lamp holder insulated,with LED lamp 12 watt PVC / polycarbonate /bakelite body, complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x50mm three terminal, complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece including anchoring bolts and making connection and testing, complete all as specified and as directed.

Supply and fixing energy efficient LED tube lights fitting 4", 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. Make : Havells/Philips/Crompton

Supply and fixing LED round/square shape 15 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, complete all as specified and as directed.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable, complete all as specified and as directed. Make : Havells Cat No LHEXAY7PN6K030 or equivalent model of make Philips / Crompton Wipro/Surya

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, complete all as specified and as directed.

Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and

washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed, complete all as specified and as directed.

M & L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, complete all as specified and as directed. Make of wire :- Havels,Finolex, RPG,Standard,HPL.