Construction Of Office Building of Assistant Executive Engineer, Public Works Department, Sub-Division Indi, At Indi Town In Indi Taluka Of Vijayapur District.(HOA-4059-80-051-0-29-386)

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

4.0 ANTI-TERMITE TREATMENT4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tre...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8%

---- Charges with alllead and lift including other incidental charges wherever neces...

2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful complet...

Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%

---- Charges with alllead and lift including other incidental charges wherever necessary for...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- Charges with alllead and lift including other incidental charges wherever necessary forsucc...

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completi...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- Charges with alllead and lift including other incidental charges wherever necessary ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

---- Charges with alllead and lift including other ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- Charges with alllead and lift including other incidental charges wherever necessary forsucc...

5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size)...

1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer ...

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete an...

12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic El...

12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and le...

11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed t...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off cor...

9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, ...

9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings...

9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shad...

9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glaz...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufa...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold app...

Supply of PVC pipe - OD 25mm and 10 Kg/sqcm

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and as directed by the Engineer i...

Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654)

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and a...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 20mm

---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 25mm

---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 32mm

---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 20X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 25X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 32X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded Elbow 20X1/2mm

---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR female Threaded Elbow 25X1/2mm

---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR female Threaded Elbow 32X1/2mm

---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 20X1/2mm

---- Charges with alllead and lift including other incidental charges wherever ne...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 25X1/2mm

---- Charges with alllead and lift including other incidental charges wherever ne...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 32X1/2mm

---- Charges with alllead and lift including other incidental charges wherever ne...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 20X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 25X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 32X1/2mm

---- Charges with alllead and lift including other incidental charges whereve...

Polyethylene water storage tank with cover and suitable locking arrangement ( Vol.2, P.No .A- 30 I.No.622)

---- Charges with alllead and lift including other incidental charges wherever necessary for...

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work ...

Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1)

---- Charges with alllead and lift including other ...

Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1)

---- Charges with alllead and lift including other ...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2)

---- Charges with alllead and lift including...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647)

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and a...

Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680)

---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work a...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)75 mm dia PVC ...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)110 mm dia PVC...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expa...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.12.69.2 125mm

---- Charges with alllead and lift including other incidental charges wherever ...

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- Charges with alllead and lift including other incidental charges wherever n...

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- Charges with alllead and lift including ot...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- Charges with alllead and lift including other incidental charges wherev...

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :12.73.1 125mm

---- Charges with alllead and lift including other incidental cha...

Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completio...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% ---- Charges with alllead and lift including other incidental charges wherever necessary f...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- Charges with alllead and lift including other i...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- Charges with alllead and lift including other incidental charges wherever necessary forsucce...

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete an...

12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be ...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic El...

12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and le...

11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed t...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off cor...

9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, ...

9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings...

9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shad...

9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glaz...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufa...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold app...

Supply of PVC pipe - OD 25mm and 10 Kg/sqcm ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and as directed by the Engineer in...

Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and as...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 20mm ---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 25mm ---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 32mm ---- Charges with alllead and lift including other incidental charges whe...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm ---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm ---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm ---- Charges with alllead and lift including other incidental charges wher...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 20X1/2mm ---- Charges with alllead and lift including other incidental charges wherever n...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 25X1/2mm ---- Charges with alllead and lift including other incidental charges wherever n...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 32X1/2mm ---- Charges with alllead and lift including other incidental charges wherever n...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 20X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 25X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 32X1/2mm ---- Charges with alllead and lift including other incidental charges wherev...

Providing and fixing brass stop cock of approved quality :15 mm nominal bore ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work a...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) ---- Charges with alllead and lift including other ...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) ---- Charges with alllead and lift including other ...

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2) ---- Charges with alllead and lift including...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work and as...

Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work an...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

75 mm dia PVC...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

110 mm dia PV...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

13.17 Providing and fixing PTMT bib cock of approved quality and colour

13.17.4 15 mm nominal bore, 90 mm long, ---- Charges with alllead and lift including other incidental charges wherever necessar...

13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- Charges with alllead and lift including other incident...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

12.69.2 125mm ---- Charges with alllead and lift including other incidental charges wherever ...

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Charges with alllead and lift including other incidental charges wherever ne...

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- Charges with alllead and lift including oth...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Charges with alllead and lift including other incidental charges whereve...

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

12.73.1 125mm ---- Charges with alllead and lift including other incidental char...

Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completio...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% ---- Charges with alllead and lift including other incidental charges wherever necessary f...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- Charges with alllead and lift including other i...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- Charges with alllead and lift including other incidental charges wherever necessary forsucce...

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete an...

12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off cor...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold app...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

12.69.2 125mm ---- Charges with alllead and lift including other incidental charges wherever ...

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Charges with alllead and lift including other incidental charges wherever ne...

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- Charges with alllead and lift including oth...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Charges with alllead and lift including other incidental charges whereve...

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

12.73.1 125mm ---- Charges with alllead and lift including other incidental char...

Peacock Chair:(Standard Company)Seat,and Back half cushion with cloth or Rexin ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful completion of work...

Teak Wood-- Revolving chair : Chair upper construction seasoned teak wood with melomin polish, stainless steel 5 caster wheel legs, Hydraulic height adjustment. The chair shall be neatly finished and ...

Side table for teak wood Executive table - Of size 36"x20". Teak wood Leg size 2"x2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer . Table to be provided with one Keyboar...

Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outersid...

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...

Office Table : Of size 4'x2.5' made out of 12/18mm MDF one keyboard and 3 drawers on right side. Table to be covered with 1mm laminate whereever visible. Hardware of the drawer should be telescopic ch...

Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. ---- Charges with alllead and lift including other incidental charges wherever necessary forsucces...

Teak wood Nagin Model 2 seater sofa : Made out of Teak wood ( Heavy Model ), Back legs of size 2"x7"x1.5" 2 nos, Front legs of size 6"x5"x5" 2 nos, 1"x4"x2" 2 nos , side patti 2"x4"x1.5", Handle 2"x4"...

Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish. ---- Charges with alllead and lift includin...

Teak Wood Executive Table : Of size 6'x2.5" or 6'x3' all pattis below the top to be of 4"x1.25", leg size 2.25"x2.25", one side 2 or 3 drawers, and another side one cabinet with shelf. Table 3 sides...

Table or computer Table : Of size 4'x2' made of PLPB ( Action tesa or century brand ) Table should consist of Right side 1 drawer wih 1 cup board inner side 1 shelf ---- Charges with alllead and lift ...

Computer Table : Of size 3'x2' made of PLPB ( Action tesa or century brand ) Table should consist of 1 drawer wih lock on right side and 1 Key board, Table should be provided with 12" modesty panel o...

Teak Wood chair ( Heavy model ) : Seat with Teak wood planks back with 6 or 8 pattis. Made out of Teak wood 3"x1.75" back legs, 2.25"x2.25" front legs, Chair side bars 3"x1.25" back with 8 reapers, Ch...

Computer Work Station of size 3' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB ( action Tesa or Century Brand ) . Each work s...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting th...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting th...

Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wir...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wir...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .6A One Way Switch ---- Charges with alllead and lift including other inciden...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .6A Two Way Switch ---- Charges with alllead and lift including other inciden...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .6A Three Way socket ---- Charges with alllead and lift including other incid...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .Stepped Fan Regulator Two Module ---- Charges with alllead and lift includin...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .6A Bell Push ---- Charges with alllead and lift including other incidental c...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .32A DP Switch ---- Charges with alllead and lift including other incidental ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .TV/Telephone Socket ---- Charges with alllead and lift including other incid...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .16A One Way Switch ---- Charges with alllead and lift including other incide...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .6/16A Universal Socket ---- Charges with alllead and lift including other in...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ph...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ph...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 2 pole ---- Charges with alllead and lift including other inc...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 4 pole ---- Charges with alllead and lift including other inc...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Charges with alllead and lift including other inci...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball ...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-24...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-24...

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewi...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, ne...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- Charges with alll...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC po...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Charges with alllead and lift...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)125 A ---- Charges with alllead and lift including other incidental charges wherever...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-1...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakag...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT ...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- Charges with alllead and lift including other incidenta...

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ---- Charges with alllead and lift including other incidental charges wherever necessary forsuccessful...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- Charges with alllead and lift including other incidental charge...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397570 Sqmm,...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff35 to 95 Sqmm ---- Charges with alllead and lift including other ...