SLEEVE COMPLETE WITH SILENT BLOCK FOR CENTRE PIVOT Etc.

Special Eligibility Criteria

1. 1

   [1] Bulk procurement will be done through LIKELY SOURCE i.e 16.4 of ER GTC, but the firm has to submit documentary evidence that the Silent Block for Centre Pivot has been purchased from ICF approved sources(Vendor ID - 2300083). Credential [Receipt note and/or Inspection certificate] must be uploaded along with the offer for the same or similar item otherwise the offer is liable to be ignored.[2] Make in India :- Applicable as per Clause No. 28.0 of Eastern Railway General Tender Condition. The subject item has been categorized under 3 (a) as per Public Procurement (Preference to Make in India) Order No. P- 45021/2/2017-PP (BE-II) dated 16.09.2020 issued by DPIIT, Ministry of Commerce and Industry, as there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class-I local suppliers only (having local content equal to or more than 50% as defined under the Para 2 of the above order) and the vendor, who do not quality to be class I local suppliers, is not allowed to bid in this tender and their offer shall not be considered for any ordering. In case any vendor, who does not qualify to be class-I local supplier for the tendered item, but participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

   Document requiredConfirmation required

Check List

1. 1

   As per Eligibility Criteria (Mandatory)

Commercial-Compliance

1. 1

   Authorisation: In case of authorized dealers, firm has to submit tender specific authorization/dealership from OEM along with the offer, otherwise their offer will be liable to be rejected.

   Document requiredConfirmation required
2. 2

   Make/Brand: Maker's name [and/or Brand] must be mentioned in the offer. If no make is mentioned, it will be presumed that stores will be of OWN make.

   Document optionalConfirmation required
3. 3

   Delivery Place: Firm to ensue the delivery at respective depots. No other delivery place will be accepted against this tender. Offer without delivery to a particular consignee as desired in the tender shall be treated as invalid offer for that consignee.

   Confirmation required
4. 4

   Make in India: As per General Tender condition and latest ruling of Rly Bd. in this matter.

   Document optionalConfirmation required
5. 5

   Marking: Manufacturer's name month & Year of manufacturing should be indicated on the material or the packing of the material as per specification or feasibility as the case may be.

   Confirmation required
6. 6

   Guaranty/Warranty: 4 2 Months from the date of Supply or 36 Months from the date of fitment whichever is earlier.

   Confirmation required
7. 7

   Pre decided splitting clause as per clause 18 of General Tender Condition will be applicable.

   Confirmation required
8. 8

   Confirmation: You have gone through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender, and you are agreed and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.

   Confirmation required
9. 9

   PVC: PVC clause will not be applicable in this tender.
10. 10

    Micro and Small Enterprises(MSEs) having ''Udyam Registration'' as per MSME Notification No. 8.0.2119(E) ;Dated:26/6/2020 and as amended from time to time and as per clause 8.1.0 of E.Rly. General Tender conditions.

    Confirmation required
11. 11

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please refer to clause 28.0 for details.

    Document optionalConfirmation required
12. 12

    Delivery from OEM's place: If you are dealer/authorized person, you are agreed to dispatch the stores directly from the manufacturer to the Railways consignee.

    Document optionalConfirmation required
13. 13

    Proper address with PIN no of the Place of Inspection along with proof as per Tendered Condition must be mentioned

    Document optionalConfirmation required
14. 14

    Udyam Registration Certificate to be uploaded along with offer for availing MSE benefits.

    Document optionalConfirmation required
15. 15

    Place of delivery: In case of delivery by road transport Delivery of material at respective depot.Firm to ensue the delivery at respective depots. No other delivery place will be accepted against this tender.

    Confirmation required
16. 16

    GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se- ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
17. 17

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Offer validity: Offer must be valid for minimum 90 days from the date of tender opening.