GE (N) P/TOKEN- 14 OF 2024-2025REPAIR TO SEWAGE LINE, SEPTIC TANK AND CONNECTED WORKS TO MD/OTM ACCN AT VARIOUS UNITS IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

Amount

Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain upto and including 300mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning of blocked WC/gully trap/ Floor trap, upto and including first manhole by manual labour as well flushing with clean water making the WC seat , gully trap, floor trap operational complete all as specified and directed by Enge-in-Charge

Taking out semi solid, liquid suspension sludge and foreign material from man hole/ septic tanks/ soakage well of any description and any depth including pumping of water and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour in repair for 300mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 300mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour in repair for 200mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 200mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 150mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Material and labour for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) including demolition of brick work/ precast concrete block walling, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for precast solid cement concrete block masonry in cement mortar (1:6) including demolition of brick work/ precast concrete block walling, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for precast solid cement concrete block masonry (Except blocks) in cement mortar (1:6) including demolition of brick work/ precast concrete block walling, built in cement mortar including all quoins, arches, pillars etc (serviceable/ usable blocks and brick work obtained shall be re-used under this item and cost of demolition of same deemed to be included in this item) complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks and the like including using necessary form work including demolition of existing concrete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/ block work or concrete surfaces mixed with integral water proofing compound in the proportion as per manufacturere's instructions, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Supply only integral water proofing compound.

Supply and fix in repair for factory made 50 mm thick, 900mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 600mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 450mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete bedding and making good to floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate and all necessary fittings, connections to trap, inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, 'P' or 'S' trap, PVC jet nozzle, necessary inlet and outlet connections making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin, white, flat back, size 580x450 mm including CP waste coupling, cp pillar tap ,chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length, pair of MS angle iron brackets or MS fastener bolts, 15mm dia PVC connection 450mm long including PTMT check nuts etc and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix in repair vitreous China half stall type, white bowl urinal flat back, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

Material and labour PVC (SWR) floor trap, 75mm dia of outlet,plain with grating including joining with solvent cement complete all as specified and as directed.

Material and labour PVC (SWR) floor trap, 100mm dia of outlet,plain with SS grating including joining with solvent cement complete all as specified and as directed.

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :-SINTEX

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :-SINTEX

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 15mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix for 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 20mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Fixing only for 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 20mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix in repairs 20 mm brass gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed .complete all as specified and as directed.

Material & labour removing of tree grown in brick masonry, behind CI pipe, parapets, shafts etc including removing root from wall by chiseling carefully without damaging the structure and making good by brick work in CM 1: 6 including toothing, bonding and plastering in CM 1:4,by applying chemical treatment with GLYPHOSATE 41% complete as specified and directed by Engineer-in- charge.

Supply and fixing in repair PVC lid of any pattern for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engr-in-Charge. Make. Sintex/Star

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed cement slurry and ponted in white or colour cement to match the tiles including 15 mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified .

M&L for coloured ,Glazed ceramic tiles in vertical wall surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid of 10 mm thick plaster in CM (1:4), complete and incl demolition of existing tilesall as specified.

Material and labour for designer coloured glossy chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description or thickness laid bedded and pointed in cement mortar complete all as specified and as directed.

Material and labour for textured heavy duty exterior ceremic tiles 300mmx 300mmx 10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) etc including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. Make: Johnson Endura textured design or equivalent of Kajaria, Nitco.

Material and labour PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete glossy interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling existing interlocking tiles, paver block, removing rubbish off the premises and laying the same tiles/ blocks, 60mm thick, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed.

Excavation in post holes ( or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick and removing surplus soil to a distance n.exc 50m in soft/ loose soil complete all as specified and as directed.

Material and labour PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in post, strut foundation including demolition of existing concrete complete all as specified and as directed.

Dismantling structural, mild steel work including doors, gates, fencing posts, framed truss etc. complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from concrete or brickwork and making good disturbed ground complete all as directed.

S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including preparation of surfaces acomplete all as specified and as directed

M/L 2 coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and directed.

Dismantling fencing wire mesh, any type

Supply only Chain link MS galvanised fencing, any size or type weighing n exc 2.50 kg/sqm conforming to IS:2712,galvanised coating of type heavy as laid down in IS 4826 ,make as approved by GE complete all as specified.

Fixing only Mild Steel Galvanised chain link fencing 75mm x 75mm wire mesh ,including fixing to any type of standards, rail, straining bolts etc including provision of binding wire ,make as approved GE,complete all as specified.

Material and labour for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed

Supply and fix for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix in repair for mild steel 1.25mm thick plain, black sheet in wall cladding steel gate and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M&L fo repair of Steel gate of any size , any shape and any position. Taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller,repair and repositioning of Base Rail , make in true position to revolve, complete all as specified and directed by Engr- in - Charge.

Supply and fix 10mm thick two layer polycarbonate sheet hollow section of any colour fixed to steel frame work with self tapping screws as in view cutter above wall incl taking down existing sheet complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete including demolition of existing concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) as in bed blocks, coping, benching and the like including using necessary form work including demolition of existing concrete all as specified and as directed.

Material and labour for PCC (1:2:4) type B2 (using 40mm graded broken stone aggregates) as in surface channel and drain including demolition of existing concrete complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or equivalent models of Hindware, Cera/Parryware.

Taking down chowkhats or frames not 1.5 sq m (with out taking off shutter form the frame) complete all as specified and directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No -ORP-10041PM or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S & F in repair 15 mm bore dia concussive push button taps of cast copper alloy,screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F in repair 2mm thick Fibre glass reinforced translucent plainsheeting fixed with screw and washer in roof, wall etc complete all as specified and directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S CHANDAN BUILDERS (BID ID -3123479)

Pratap enterprises (BID ID -3107905)

R k construction (BID ID -3111899)

M/s Asrani and sons (BID ID -3124240)

THE SAIRAM CONSTRUCTIONS (BID ID -3103546)