Rewinding of 150 HP S1 Duty Raw Water Pump Motor and Replacement of Burnt Bearings of 690 kW Motor No.1 (Stand by) including Dismantling, Re-Assembly, Testing and Commissioning at Moka LLC Canal under Ballari City Corporation.

Rewinding of 150 HP S1 Duty Raw Water Pump Motor and Replacement of Burnt Bearings of 690 kW Motor No.1 (Stand by) including Dismantling, Re-Assembly, Testing and Commissioning at Moka LLC Canal under Ballari City Corporation.

Removing and refixing the 230/415 v 50 hz I phase/III phase suitable

capacity suitable speed horizontal foot mounted screen protected drip

proof continous rated monoblock/squrrel cage induction motor ...

Supply and brazing of motor end lead cable by using H.T Copper lugs,

brazing materials, gas, soldering past, etc as original for all the three

phases for motor. as Per Common KUWS& DB SR 2023-24 Page ...

Removing the burnt out supporting insulator from motor of main side

Supply and fixing of new insulator to same place as original.. as Per Common KUWS& DB SR 2023-24 Page No-230 with Item No-19.24

Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months, Bearing cost for 150 HP, as Per Common KUWS& DB SR 2023-24 Page No-159 with Item No-13.50.13

Supplying and fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessarys crews, bolts, nuts, necessary phase separators, handle and wiring complete.Protection of Ove...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. as Per...

The work includes dismantling, bearing replacement, re-assembly, testing and commissioning of 690 kW motor coupled pump set including decoupling of pump and motor coupling, removal of incoming motor p...

Supply and installation of ball roller bearing No.6224C3 (driving end side), Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low ...

Supply and installation of ball roller bearing No.7322B of Size 110 mm Bore diameter, 240 mm Outside diameter, 50 mm Width, Contact angle40degree, Tolerance classClass P6 (P6) (non driving end side),...