Loading
Loading…
Loading…
Tender Value
₹17.6 L
EMD Value
₹35,120
Closing Date
2 Sept 2026, 11:30 am
Chief Engineer, CEG
Room No. 222, CDO Building, Indira Gandhi Centre for Atomic Research, Kalpakkam - 603102.
Refurbishment of existing perimeter fencing at Training School and Training Centre at IGCAR, Kalpakkam.
2026_IGCAR_916373_1
CEG/IGC/2217/2026
Open Tender
Construction Works
Item Rate
150 days
Kalpakkam
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹35,120
2 Sept 2026
8 Jul 2026
3 Sept 2026
9 Jul 2026
2 Sept 2026
10 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-Charge for the following. | |||||
| 1.01 | Upto 25mm average thickness | 100 | Sq.m. | - | - |
| 1.02 | Above 25mm and upto 50mm average thickness | 20 | Sq.m. | - | - |
| 2Cleaning of reinforcement from rust from the reinforcing bars of following diameter to give it a total rust free steel surface by providing and using chemical rust remover of ‘Cera Rust remover/Fosroc Reebaklens RR/Sika Rustoff-100 or approved equivalent make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-in-Charge. | |||||
| 2.01 | Bars upto 12mm diameter | 770 | Metres | - | - |
| 3Chipping the RCC around the steel reinforcement with average 25mm gap (but not less tha 15mm clear air gap) including chipping the concrete with sharp tools without damaging the reinforcement, cleaning the reinforcement to facilitate application of rust remover/anti corrosive treatment etc. for below mentioned steel reinforcement all complete as directed by the Engineer-in-Charge. | |||||
| 3.01 | Bars upto 12mm diameter | 680 | Metres | - | - |
| 4Providing and applying two coats of Anti Corrosive Protection paint (Epoxy Zinc rich primer) of ‘Cera Zinc ZR / Fosroc Nitozinc Primer / Sika FerroGard-950 IN‘ or approved equivalent make over reinforcement of below mentioned diameter complete all as per manufacturers specification and all as directed by the Engineer-in-Charge. | |||||
| 4.01 | Steel reinforcement bars upto 12mm diameter | 500 | Metres | - | - |
| 5 | Providing, mixing and applying epoxy resin based bonding agent coat of ‘Cera Bond EP / Fosroc Nito Bond EP/ Sikadur-32 IN’ or approved equivalent on chipped portion of concrete/prepared concrete surface, including labour, tools etc. complete all as per specifications and as directed by the Engineer-in-Charge | 160 | Sq.m. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
BOQ_963145.xls
BOQ • 0.29 MB
2217technicalbid.pdf
Tender Documents • 2.64 MB
2217FormsACDFGHforfillinganduploading.xls
Tender Documents • 0.08 MB
2217Undertakingsandformoftender.pdf
Tender Documents • 0.22 MB
2217amt3.pdf
PDF • 0.01 MB
2217amt2.pdf
PDF • 0.45 MB
2217ame1.pdf
PDF • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].