Provision of Electrical Installation and Fans at Disaster Management Center Office Nand Nagri in ward No-220 under North South Zone

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed mild PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2*2.5 +1*2.5 sq mm

(b) 4*2.5sqmm + 2*2.5sqmm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections etc. as required. (a) 5/6 amps switch

(b) 3 pin 5/6 amp socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet and 15/16 A modular switch connections etc as required.

Supplying and fixing following way, single pole and neutral , sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63 amps

Supply and fixing 25A rating double pole,(single phaseand neutral) 240 volts, residual current circuit breaker(RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connection testing and commissioning etc as required.(40 amp)

supply, installation, Testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Currect (BLDC) Motor, class of insulation:B, 3 nos blades, 30 cm down rod, 2 nos. canopies, shackle kit, safety ropr, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, Earthng etc. complete as required.

Supply of 12"(300 mm) sweep 1400 rpm exhaust fan heavy duty complete with shutter , blade etc as requird

Installation of exhaust fan in the existing opening, including making good the damage, connection testing, commissioning etc as required.(upto 450 mm sweep)

"SITC of 60w LED Flood Light luminiare fitted with lens, made of pressure die cast aluminum housing & toughened glass cover complete with the following specification as reqd. (b) Total system wattage = 60 watt+/-5% (c) Total Lumens output>=15000 lumens (d) Luminaire Efficacy>=100 Lm/w (e) power factor>=.95 (f) Protection Class-IP-66

P&F Hot press sheet moulded compound (SMC) fire retardnt(Temp. resistant upto 200 C), IP 55 weather proof pole box of inner dimension 200x150x100mm(NS) complete with arrangement for fixing of 1 nos of 6 to 32 amp single pole MCB & (MCB/Isolator excluded) with neutral link duty shorting on DIN channel with 2 Nos of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc s reqd.

SITC of surface mounting LED luminaire suitable for 1X20 watt LED rating box type complete with extruded aluminium batten prewired with high efficient LEDs with the following: a) Total System Wattage 20 ±5% Watt b) Luminaries effucacy ≥ 100 lumens/watt c) Power factor ≥ 0.95

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply and f of XLPE insulated and PVC Sheathed Al conductor armoured cables for working voltage upto 1.1kv conforming to IS7098 (Part-I) /1998 as required. .a 2x6 sqmm

SITC of single/three phase mono block pump set complete with all accessories workable on 240/415 volts,50 HZ AC supply(a)1 HP(0.75 kw) single phase pump set,head from 12-30 mtr suction and delivery 25x25mm.

Supply and fixing of call bell/buzzer suitable for single phase/230 V complete as required.

Providing & laying earth connection from earth electrode with 6SWG dia G.I. wire in 15mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

P/F circular/Hexagonal cast iron/MS sheet box for ceiling fan clamp of internal dia.140mm. 73mm.height top lid of 1.5mm thick MS sheet with its top surface for proper bending top lid shall be secured in to cast iron MS sheet box by means of 3.3mm dia.be made of 12mm. dia. MS bar bent to shape as per standard drawing complete as required.