General Fund - 2024-2025 - Construction of Pump room to existing well at Tankvayal in Ward No.8.

Earth work excavation for foundation and depositing soil on bank with in initial lead of 10m and initial lift of 2ms except hard rock but not requiring blasting etc., complete complying with standard specification.

P.C.C. 1:4:8 mix using 40mm size HBG Metal mixing laying curing and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification

Supplying and erecting steel centering for the sides and soffits of RCC slab or plane surfaces excluding strutting and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification. Plain centering

Supplying, fabricating and placing in position of steel rods (M.S or RTS) including cost of binding wire and the rate including cost and conveyance of all materials and labour charges etc. complete complying with standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

RR masonry in cement mortar 1:5 mix using new rough stones and bond stones including simultaneous pointing and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 100Cft)

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Plastering in cm 1:5 mix to 12mm thick and the rate including cost and conveyance of all material and labour charges etc., complete complying with standard specifications

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supplying and fixing in position of M.S. Door and the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications

Painting two coats on new iron work using best approved quality of ready mixed enamel paint and the rate including cost of all charges etc complete

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5 Amphere F.T switch (without Hylem sheet) with painting of suitable colour for open PVC light/fan point, 4 points (for electronic regulator) (SD-17)

Supply and fixing of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supportsand supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete (SD 129)

Supply and fixing of 63A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only (SD 631)

Supply and run of 2of 6 sq.mm PVC insulated SC unsheathed alu. Conductor of 1100 V on 7/20 G.I. bearer wire for service main ( SD 67)

Supply and fixing of PVC Insulated and sheated 3 Core flat type copper cable conforming to IS 694/1990(S.D.238 )