752887A PROVN OF OTM ACCN FOR MEDICAL DENTAL CENTRE MDC MHOW

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II ( Internal Water supply, Hot water Supply and Solar Water Heater) Lump sum price worked out by the contractor for Internal Water Supply, Hot water Supply and Solar Water Heater) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III ( Internal Electrification) Lump sum price worked out by the contractor for 'Internal Electrification ' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for ' External Water Supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (External Electric Supply) Lump sum price worked out by the contractor for 'External Electrification ' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Road, Path and Culvert) Lump sum price worked out by the contractor for 'Road Path and Culvert ' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Security Wall & Gate) Lump sum price worked out by the contractor for 'Security Wall & Gate ' as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.

Sch 'A' Part-X (Fire Detection System) Lump sum price worked out by the contractor for 'Fire Detection System' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Sch 'A' Part-XII (Demoltion & Dismantling) Lump sum price worked out by the contractor for 'Demolition & Dismantling' as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES.

Note for Srl No 2 to 13 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 13 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XIII (Miscellaneous works)

Internal Water Supply

Item No 01 : S&F angle stop valves, 15 mm bore fancy type chromium plated, with crutch or butterfly handle, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 02 : S&F bib tap 15 mm bore, chromium plated, fancy type long shank with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 03 : S&F bib tap elbow operated 15 mm bore, chromium plated, fancy type long shank with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 04 : S & F two way angle valve 15 mm bore, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved makes complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 05 : S&F chromium plated shower rose 120x120 mm size with CP arm 300mm long with swivel joint fixed to pipe etc complete all as specified and directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 06 :S&F chromium plated health faucet with 8mm dia and 1 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed. Make : Plumber/Essco of jaguar (Economical Range)

Item No 07 : S&F CP WHB surgical mixture elbow operated 15 mm bore dia chromium plated fancy type screw down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 08 : S&F chromium plated wall mixer 15 mm dia complete all as specified and directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 09 : S&F 32 mm dia PVC Waste pipe for wash basin/sink etc complete all as specified and as directed.

Item No 10 : S& F CP brass tubular towel rail 60 cm long, 20 mm dia fixed with wooden gutties with steel screws complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 11 : S&F soap dish brass chromium plated complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 12: S&F corner self complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 13 : S&F glass self complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Item No 14 : S&F toilet paper holder brass chromium plated complete all as specified and as directed. Make: Jaguar (economical range) or equivalent in GEM/Parco)

Internal Electrification

Item No 15 : M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed for the following:-

(a) one light point controlled by one way switch 5 amps

(b) one fan point controlled by one way switch 5 amps

(c) one light point controlled by two way switch 5 amps

(d) one 3 pin 5 Amps switch socket outlet controlled by one switch on independent board.

(e) one bell point controlled by one bell switch 5 amps

(f) one 3 pin 5 Amps switch socket outlet controlled by one switch on same board

Item No 16 : M&L for Point wiring for one 5/15 Amps Switch socket combination using approved colour coding as per IS, with multistranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

Item No 17 : All as per item No. 15 but using multistranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked for AC point including PVC insulated multistranded copper conductor 4.0 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

Item No 18 : M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of conductor cable, one runs of earth cable and one run of PVC conduit will be measured as one unit.

Item No 19 : M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of conductor cable, one runs of earth cable and one run of PVC conduit will be measured as one unit.

Item No 20 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.

Item No 21 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.

Item No 22 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.

Item No 23 : MCB 'C' series 240/415 volts, 50 HZ, 10 KA breaking capacity, ISI marked (IS 8828), complete of following capacities ;-

(a) MCB SP 5 to 32 Amps.

(b) MCB SPN 5 to 32 Amps.

(c) MCB SPN 40 Amps.

(d) MCB TPN 63 Amps.

Item No 24 : S&F ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 volts, 50 Hz, BEE 5 star rating, ISI Marked complete with down rod, canopy, blades, BLDC motor etc incl electrical connections from ceiling rose to fan with 3 core 1.5 sqmm multi stranded copper conductor cable & writing MES No. with synthetic enamel paint complete all as specified and directed.

Item No 25 : S&F energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size of the bots 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

Item No 26 : S & F 1 x 10 W LED light fittings mirror type with high diffurser, 2 feet, 10 watt 220 voit AC decorative typr with driver holder and LED lamp including complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed.

Item No 27 : S & F wall mounted LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser,high lumen out put box type fitting,230 volts and integrated electronic driver connector block etc with warrnty option of 5 years from date of installation and necessary mounting arrangement and connected with 3 core multistrnded flexible copper cable PVC insulated of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed.

Item No 28: S&F integral post top lanters complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 15 watt LED lamp, GI pipe as requied to fix in gate piller complete all as specfied and directed. Make : Havells cat part No. RUBYMINIPT15WLED757PSYMTOPC or eqv in philips complete all as specified and directed.

Item No 29 : S & F for LED luminiaire 600 mm x 600mm square LED panel 35/36 watts, 220V recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including up with driver there core flexible copperr conductor cases of suitable size complete all as specified and as directed.

Item No 30 : S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 itrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JOC's and OR Md Accn complete all as specified and as directed.

Item No 31 : S & F found shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holder, LED lamp suitable for roof ceiling including connecting up with three core flexible copper cable of suitable size complete all as specified and directed.

Item No 32 : S & F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and directed. Make Habells Cat No LKDLO6160099 or its equvalent in Philips, Bajaj.

Item No 33 : S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 65 for security light fitting luminaries with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Item No 34 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to main earthing lead 4mm dia GI wire by means of GI nuts, bolts & washers all as shown in electrial plate No 3 MES Schedule Part I protected by 15 mm bore GI pipe light grade, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;- earth lead & protection pipe up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).

External Water Supply

Item No 35 : Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint on outer side, suitable for push on joint (rubber gasket joint) including rubber gasket, in any length laid in trenches/ over masonry pillar and connection to old or new position complete all as specified and directed of following sizes:-

(a) 100 mm bore

(b) 80 mm bore

Item No 36: Construction of brick masonry valve pit chamber of size 900mm x 900mm x 900mm (internal dimensions) including necessary excavation and earth work in any type of soil, angle iron frame MS sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Item No 37: Construction of brick masonry valve pit chamber of size 600mm x 600mm x 600mm (internal dimensions) including necessary excavation and earth work in any type of soil, angle iron frame MS sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Item No 38 : M&L for Ductile iron fitting for spigot socket pipe such as bends (any type, radius and angle) tapers any type (straight, bend increasing, decreasing or double socket etc.) Tee pieces single branch "Y" junction, double branch, cross (All socket or socket and spigot) collars, restrained joint, mechanical joint, caps & plugs 100 mm to 250 mm dia bore including cutting and jointing old/new positions as specified and as directed.

External Electric Supply

Item No 39: Supply and fix switch air break gang operated HT 11 KV Volt grade triple pole with 12 insulators, 200 amps rating mounted on Polymer based insulator and fitted on steel frame horizontally operated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangement flat iron clamp 50 mm x 6 mm including MS channel of suitable size and length for fixing GOD including bolts, nuts, and washers complete all as specified and directed.

Item No 40 : S & F LED light fitting for street /security light, energy saving & environmental friendly with long life versatile pressure die-cast housing with toughened glass and high power LEDs with secondary optics of capacity 35/36 watts 240 volts AC 50 Hz, IP 66 protection with warranty option of 5 years from date of installation complete all as specified and directed.

Item No 41: Supply and fix LED Post top lantern light fitting 40 watt, IP65 complete with all accessories complete all as specified and directed.

Item No 42: S & F integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2 mm thick of suitable size embedded in PCC 1:2:4 base, electrical connections with adequate size complete all as specified and directed.

Item No 43: Labour only for shifting of Transformer step down outdoor type mounted on PCC platform / 2 pole structure including necessary electrical connections for incoming & out going to HT 11 KV 3 phase, LT 433 volts, 3 phase 4 wire of 250 KVA capacity transformer complete all as specified and directed. Note: Transformer will be issued by GE.

Item No 44: Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1500 mm x 1000 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. INCOMMING (a) Copper strip busbar of 800 Amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) MCCB, Microprocessor release type, 4 poles, 415 Volts, Lcu = 25 KA breaking capacity, rating 400 Amps including all fixing accessories with both ends spreader links -01 No

OUTGOING (a) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 250 Amps including all fixing accessories with both ends spreader links - 01 No (b) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links - 02 Nos (c) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 02 Nos (Lift) (d) MCB TPN 20 Amps 10 KA, 'C' series including connection complete- 02 Nos. (e) Multifunctional Digial type timer Switch 240 volts AC Single Phase - 01 No. (f) Power contactor 40 amps 4 pole 415 Volts AC - 01 No (g) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.

Item No 45: Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1000 mm x 1000 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. INCOMMING (a) Copper strip bus bar of 500 Amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) MCCB, 4 poles, with rotary handle, adjustable thermal magnetic release type 415 Volts, Lcu = 35/36 KA breaking capacity, rating 250 Amps including all fixing accessories with both ends spreader links -01 No

OUTGOING (a) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links - 03 Nos (b) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 02 Nos (c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.

Item No 46 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to Galvanised steel strip 32x6 mm by means of GI nuts, bolts & washers protected by 40 mm bore GI pipe light grade all as shown in electrial plate No 3 MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1, 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;-Earth protection pipe & earth strip up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).

Item No 47 : M&L for Earthing with copper earth plate electrode 600 mm x 600 mm & 3.15 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to copper strip 20 x 3 mm by means of GI nuts, bolts & washers protected by 40 mm bore GI pipe light grade all as shown in electrial plate No 3 MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1, 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;-Earth protection pipe & earth strip up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).

Item No 48 : BLANK

Item No 49: Supply, install , commisioning and testing of Factory assembled Silent DG Set with AMF Panel of capacity 200 KVA, 1500 RPM, Turbo charged, water cooled comprising of 236 BHP Engine with microprocessor based Gen set controller with silencer and canopy for soundless mode (sound level not exc level specified by control pollution board) and alternator both mounted on a common base frame conforming to ISO-3046/BS-5514 and IS-10002 rated for 415 volts 50 cycles, 0.8 Power factor (PF) complete with residential silencer, AVM pads, battery with its lead, first fill of lub oil and all engine accessories such as self starter, alternotor/dynomo with suitable coupling and base frame on foundation as recommended by the manufacture and consisting of other electrical component and maintenance free battey including suitable size of copper cable lead with teminal, all mounting accessory and AVM pads all as specified comprising with the following.(Make: Engine: Cummins Alternator: Stamford/ Kirloskar Green)

A. ENGINE (a) vertical multicylinder, cold starting in accordance with BS-5514/IS-10002 at 1500 PM including the following accessories:- (i) Fuel tank (Suitable for capacity for minimum 12 Hrs run). (ii) Fuel filter (Ore & Micro). (iii) Fuel feed pump (Inline monoblock/PT type) with governor. (iv) Lub oil filter. (v) Lub oil cooler. (vi) Dry type/ol bah type air cleaner. (vii) Exhaust Silencer (Industrial type). (viii) Radiator, Radiator fan & mounting. (ix) Fly wheel with starting ring. (x) Expansion bellow. (xi) Exhaust gas turbocharger.

(xii) 12 Volt electric starter with 01 No. maintenance free battery 180 AH capacity. (xiii) Battery charging alternator (xiv) Engine control panel consisting with ON/OFF Start Key, Lub oil pressure guage, Battery charging ammeter, Coolant temp gauge, RPM Meter etc. (xv) Suitable flexible coupling (xvi) Front & Rear engine mounting supports (AVM pads) B. ALTERNATOR (i) Alternator, 3 phase, 415 Volts, 50 Hzs 0.8 PF 1500 RPM self excited, self regulated screen profacted, drip proof alternator of capacity 200 KVA conforming to BSS 5000 (part 99) with insulation class 'H', single bearing and automatic voltage regulator accessories

C. ACOUSTIC ENCLOSURE (i) Specially design to meet stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions. (ii) Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp. (iii) Powder coated for long lasting service life and superior finish. (iv) Insulation material meets exacting IS 8183. D. ACCESSORIES (i) Suitable channel frame (ii) storage battery of 12 Volts of suitable 180 AH capacity as per manufactures instruction mounted on angle iron froame of suitable size as directed. E. CONTROL PANEL (a) The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories:-

(i) MCCB 4 Pole 200 Amps 36 KA microprocessor release type - 01 No. (ii) Digital Ammeter with CT of size 630/5A - 01 No. (iii) Digital Voltmeter 3 Ph 415 volts - 01 No (iv) Microprocessor based DG set control unit with SIM enable - 01 No (v) Indicating lamps (LED type) (R-Y-B) - 01 set F. AMF PANEL (a) The AMF panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories:- (i) MCCB 4 pole 250 Amps 36 KA microprocessor release type - 02 Nos (ii) Contractor 250 Amps - 02 Nos (iii) Digital Ammeter with CT of size 200/5A - 02 Nos (iv) Digital Voltmeter 3 Ph 415 volts - 02 Nos (v) Indicating lamps (LED type) (R-Y-B) -02 sets (vi) Relay, timmer and other acessories as per manufactor.

NOTE:- (i) Antivitraton mounting pads to be incorported during installation. (ii) PCC Foundation and platform as per manufacters design/recommendation to be followed during installation of DG Set . (iii) Silencer pipe of engine is to be extended out of the building with suitable dia of GI medium grade pipe duly heat insulated with suitable asbestors rops duly claded with plaster of paris rate of which deemed included in the unit rate of Gen Set.

(iv) Lubricating oil shall be provided by the contractor cost of which deemed to be included in the unit rate of DG Set. (v) Four Nos free servicing with complete material such as Lubricating oil, coolent, Lub oil filter, diesel filters, Air filter and fan belts etc as per manufacturer recommendation will be deemed included in the unit rate of DG set.

COOLING APPLIANCES

Item No 50 : Supply and fixing self contained drinking water cooler partially stainless steel working ith non CFC refrigerent of above 3 star ratng electric driven 230 Volts 50 cycles AC supply single phase having approx storage capacity of 80 litre and normal cooling capacity of 40 litre per hour including 100mm thick PCC (1:2:4) platform complete all as specified and directed. (Make: Voltas/Usha/Blue Star)

Item No 51 : Supply and fixing self contained drinking water cooler partially stainless steel working ith non CFC refrigerent of above 3 star ratng electric driven 230 Volts 50 cycles AC supply single phase having approx storage capacity of 120 litre and normal cooling capacity of 60 litre per hour including 100mm thick PCC (1:2:4) platform complete all as specified and directed. (Make: Voltas/Usha/Blue Star)

Item No 52: Supply, installation & testing Refrigerators electric driven (single Phase), 240 volts, 50 Hz, single door, capacity 185 litres BEE 5 Star rated , frost free, auto defrost to stop ice buildup, invertor compressor, energy efficient, less noise and more durable toughened glass inner self with all accessories complete all as specified and directed. (Make: Samsung/LG/Whirlpool)

Item No 53: Supply, installation & testing Refrigerators electric driven (single Phase), 240 volts, 50 Hz, single door, capacity 235 litres BEE 5 Star rated , frost free, auto defrost to stop ice buildup, invertor compressor, energy efficient, less noise and more durable toughened glass inner self with all accessories complete all as specified and directed. (Make: Samsung/LG/Whirlpool)

Item No 54: Supply, installation & testing Refrigerators electric driven (single Phase), 240 volts, 50 Hz, single door, capacity 284 litres BEE 5 Star rated , frost free, auto defrost to stop ice buildup, invertor compressor, energy efficient, less noise and more durable toughened glass inner self with all accessories complete all as specified and directed. (Make: Samsung/LG/Whirlpool)

Item No 55: Supply and fix Voltage stablizer for automatic operation single phase naturally air cooled indoor type and disigned for input variation between 170 Volts to 250 Volts with output voltage stabilised at 230 Volts with accuracy of + 2.5% and capacity 1 KVA complete all as specified and directed. (Make: V- Guard/Volina/AE)

Item No 56: Supply and fix Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with output voltage stabilised at 230 Volts with accurcy of + 2.5% and capacity 2 KVA complete all as specified and directed. (Make: V- Guard/Volina/AE)

Road Path and Culvert

Item No 58: M & L for 2mm thick painting to road surfaces as in lines, cashes, arrows, letters, zebra crossing etc on roads, pavements and the like etc. (width not exc. 10cm)with thermoplastic road marking paint incl applying type-II glass beads dispensed from the in built while the painting surfaces are hot by mechanical mean including cleaning surfaces complete all as specified and directed. Make: STP/ASIAN PAINTS/BERGER).

Item No 59: S&F aluminium roads studs of size 100x100x20 mm with shank reflective microprismatic (red/yellow/white) with MS Zinc coated nails of size 12 mm dia and 120 mm long having both as sides (Dual direction) high impact ABC 3 Nos containing 7 heads each i.e. 42 heads in retro-reflector etc complete aluminium coated of approved quality all as specified.

Item No 60: S&F solar studs aluminium alloy and polcarbonate stud aluminium decast body with MS zinc coated nails of size 12 mm dia and 120 mm long, complete all as specified and directed

Sewage Disposal

Item No 61: M & L for DWCPE 180 mm outer dia / 163 mm iner dia meter pipes including testing complete all as specified and directed.

Security Wall and gate

Item No 62: M & L for Sign board "MEDICAL DENTAL CENTRE MHOW " consisit of the following specification : (i) Sign board shall be 0.60 mtr wide box type and consist of AI 50x50x6mm covered with 5mm thick ACAP sheet, and in arc shape/rectangular or required shape fixed to stainless steel structure fixed on RCC column with adequate electric fittings etc all as specified and directed. (ii) writing letters or figures (Block. Roman, Italic or Indian) Stainless steel or brass meterial ( n exc 50 mm depth of letter and height exc 225 mm but n.exc 300 mm) complete all as specified and directed.

Arboriculture

Item No 63: Supply & plantation of fishtal palm trees of different species as sapling height 8 to 10 fit including digging holes composting, watering etc complete all as specified and as directed.

Item No 64: Supply & plantation of Bottle palm trees of different species as sapling height 8 to 10 fit including digging holes composting, watering etc complete all as specified and as directed.

Item No 65: Supply & plantation of Ficus panda trees of different species as sapling height 8 to 10 fit including digging holes composting, watering etc complete all as specified and as directed.

Fire Detector System

Item No 66: Supply and installtion of OH water storage tank GRP/FRP of capacity 5000 ltrs complete all as specified and directed.

Item No 67: S&F MS flanged pipe 25 mm NB heavy duty for MDC Accn duly painted with 2 coats of synthetic enamel paint over zinc chromate peimer complete all as specified and as directed.

Item No 68: Supply & Fixing Exist sign board or information board duly fabricated with flexo sheet or high grade quality and writing/ printing of information/picture/drawing/layout pln over flexo sheet duly structure framed with square iron bar of suitable size and fixed with suitable screws complete all as specified and directed.

Item No 69: S&F Fire extinguiser ISI marked CO2 type 4.5 KG for 'B' & 'C' class of approved by explosive depatment, Govt of india Nagput and conforming tols: 15683 : 2006 (old IS-2878) complete all as specified and directed.

Item No 70: Supply only of stored pressure type, ISI marked Fire Extinguisher ABC type dry powder of capacity 4.0 KG conforming to IS : 15683 : 2006 (old IS: 13849) complete all specified and directed

Item No 71: Supply only for Fire Extinguisher Mechanical Foam type ISI Marked Foam (AFFF) type Fire Extinguisher 9.0 ltrs capacity conforming to IS: 15683 : 2006 complete all as specified and as directed.

Item No 71 A: Supplying, installation, testing & commisioning of out door type LT panel board made out of 3.00 mm thick CRCA sheet factory made cubical type, with slanting top at leaset 10 Cm projection all around, fedder pillar type, fabricated with 50*50/6mm angle iron frame work with independent door for each feeder, busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminium duly insulated with heat retaedent fire proof (HRFR) heat shrinkable sleeves of relevant colours. Bus bar shall be properly supported/mounted on epoxy insulated. All live parts and joints shall be instulated with (HRFP) shrouds, conforming to IS, including provn for connecting suitable earth strips, painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangment to suply & fix the following accessories, including connecting cable glands and cable lugs, fixing of earth lead to earth terminal of panel including

OUTGOING (a) MCCB, 3 pole, 415 volts, 36 KA breaking capacity, rating 100 Amps- 02 Nos (b)MCCB, 3 pole, 415 volts, 36 KA breaking capacity, rating 63 Amps- 02 Nos (c) Elect motor starter suitable for booster pump 440 volts, 3 phase, 50 Hz 30m head, 450 LPM discharge-02 Nos.

Rain Water Harvesting

Item No 72: M & L for providing rain water harvesting system for recharging ground water table guiding rain water flow of building roof to recharge pit include the following: (i) Excavation and earthwork upto 1.80m deep and 1.50 m in dia, brick work in wall upto 0.80m height. (ii) Boulder (5to 10mm) filling upto 0.30m in top. (iii) Coarse sand filling upto 0.50 m height. (iv) Gravel (5 to 10 mm) filling upto 0.50m height. (v) Boulder (5 to 10mm) filling upto 0.50m in bottom. (vi) Down take pipes 100 mm size - 15 mtr

Item No 73: S&F 160mm dia PVC (SWR) rain water pipes single socket in any length with rubber ring joint fixed to walls with necessary pvc clamp complete all as specified and directed.

Item No 74: S&F 160mm dia PVC (SWR) bend of any radious complete all as specified and directed.

Item No 75: S&F 160mm dia PVC (SWR)branch piece, (single Y) equal or unequal complete all as specified and directed.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 27420.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

R. S. JAIN AND SONS

M/s Gujarat Construction Company

Tiki Water proofing Co