Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.9 LAccepted-AOC | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹25.8 L+₹22,099 (0.87%)Rejected-Finance NEAR LIC OFFICE KALAIGNAR ARIVALAYAM SHOP ROOM NO7 GROUND FLOOR OF BACK SIDE PHOENIX BAY SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744101 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹27.8 L+₹2.3 L (8.93%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹29.0 L+₹3.5 L (13.5%)Rejected-Finance WZ 680 1ST FLOOR KH NO 662 GALI NO 27 PALAM COLONY PALAM VILLAGE SOUTH WEST DELHI 110045 | DELHI | SOUTH WEST DELHI | DELHI | 110045 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹29.5 L+₹4.0 L (15.7%)Rejected-Finance D 35 1ST FLOOR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
10 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
ADDITION / ALTERATION TO OMQ BUILDING NO. RV-18, RV-21 AND RV-24 AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2024_MES_647114_1
GENP-01/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹87,400
Yes
17 May 2024
19 Mar 2024
12 Apr 2024
19 Mar 2024
10 Apr 2024
3 Apr 2024
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing debries off the premises complete all as specified and as directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) n. exc 15 cm thickness as in landing, cooking platform and chajjas complete all as specified and as directed.
Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and as directed.
Demolition of brick work or stone buillder built in cement mortar of any description complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floors aprons complete all as specified and as directed.
M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete complete all specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6), surface finished even and fair etc complete all as specified and as directed.
M&L for 10 mm thick cement plaster in cement mortar (1:3) as on ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar (1:4) with water proofing compound, surface finished even and smooth without using extra cement complete in all specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item of BOQ.
M&L for preparation of new plastered surfaces of ceiling surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces over a coat of primer complete all as specified and as directed.
M&L for prepartion of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke, soots, mould, moss efforescent salt & trading oil and grease spots and filling cracks/holes by cement base putty and applying two coats of oil bound distemper complete all as specified and as directed.
M&L for providing and applying cement base wall care putty of 02 mm thickness (min) over plastered surface to prepare the surface even and smooth complete all as specified and as directed.
M&L for prepartion of plastered or unplastered old decorated surfces by brooming down or steel wire brushing, scraping down smoke, soot, mould, moss, efflorescent salt, trading oil and grease spots and filling cracks/holes by cement base wall care putty and applying two coats of oil bound distemper on ceiling complete all as specified and as directed.
M&L for preparing new plastered external surface of walls including necessary scaffolding etc and applying two coats of exterior emulsion paint over a coat of primer etc complete all as specified and as directed. Note:- Full quantity of paint will be deposited to Engr-In-Charge and work must be got executed through authorised applicator of manufacturer duly approved by the GE before commencement of work.
M&L for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding etc and applying two coats of exterior emulsion paint over a coat of primer over 2mm thick (min) cement base wall care putty to obtain smooth finishing surface etc complete all as specified and directed. Note:- Full quantity of Paint will be submitted to Engr-In-Charge and work must be got executed through authorised applicator of manufacturer dul approved by the GE before commencement of work.
M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor etc complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface of size (450 x 350)mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick rendering with CM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed.
M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm as in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with and including 10 mm thick rendering CM (1:4) as on vertical surfaces complete all as spcified and as directed.
M&L for 20(+ 2mm) thick Granite jet black colour, work (table rubbed and polished ) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note: The cost of half round moulding to exposed edges shall be deemed to be included in unit rate.
M & L for 75mm thick cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with and including bitumen (85/25) and sand in the proportion of (1:3 ) by weight complete all as spcified and as specified.
M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping fo columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) are not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.
Taking down shutter of any discription area exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.
M&L for solid PVC door frame of size (50mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
M&L for pressed steel frame for door with one rebated of size (105 x 60) mm including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.
M&L for pressed steel frame for door with double rebated of size (125 x 60) mm including necessary fixing lugs, hinges , lock strike plate etc complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in back filing to pressed steel frames etc, complete all specified and as directed.
S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F for 35mm thick 2nd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F for 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and as directed.
M&L for 25 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screw to timber frame work and including necessary continuous piano hinges, handle etc complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples complete all as specified and as directed.
S&F butt hinges, 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.
S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed.
S & F of cast type anodised aluminium handles of size 150 mm complete all as specified and as directed.
S&F MS powder coated 20 mm dia curtain rod with and including brackets and end knobs / fineals complete all as spcified and as directed.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed.
S&F for Powder coated aluminium frame three tier for doors, windows, ventilators with one or more rebates including all joining cleat for fixing etc. complete all as specified and as directed.
S & F of power coated aluminium window and ventlator shutters sliding type, aluminium section weighing 0.55 kg/m including all necessary joining cleats, glazing cips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed.
S & F floor door stopper of size 140 mm long aluminium body and tongue, anodized with hard drawn steel spring including cleats etc fixed to door complete all as specified and as directed.
M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood & wood based surfaces of any description not otherwise described over 10 cm width & girth and aplying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old paited surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.
S&F tubes, 'medium grade' 15mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F tubes, 'medium grade' 20mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M & L for cuting holes in brick walls exc half brick but n.exc one brick thick, built in cement mortar for fixing holdfasts in jambs of existing opening and making good complete all as specified and as directed.
S&F 15 mm bore bib taps, chromium plated fancy type, long body screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S& F 15 mm bore of fancy type (concealed type) stop cock cast copper alloy, chromium plated, screws down, high pressure screw both ends for iron pipe or for union all as fixed complete all as specified and as directed.
S&F stainless steel kitchen sink without drainage made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (495 x 420)mm bowl size (410 x 330mm x 160mm) complete all as specified and as directed.
S&F sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915 mm x 460mm) with bowl size (410mm x 330mm x 160mm) complete all as specified and as directed.
M&L for 15 mm dia stop valve CP cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle screwed both side for iron pipe oe for union and fixed complete all as specified and as directed.
S&F CP Soap dish of complete all as specified and directed. Make-AKP-35731P of Jaquar or equvelent in kohler.
S & F CP towel ring complete all as specified and directed. Make-ACN-1121BN of of Jaquar or equvelent in kohler.
S&F 15 mm two in one angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange complete all as specified and as directed.
S&F vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and as directed.
S&F in repair water closet vitreous china squatting pan,Orissa pattern size (580x440)mm white with integral foot rests ( excluding flushing cistern and flush pipe) and including with 'P' or 'S trap complete including provison of lime concrete bedding complete all as specified and as directed.
S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all specified and as directed.
S&F 15mm bore angle cock, chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all specified and as directed.
S&F sink mixer with swivel spout and 450 mm long braided houses chromium plated complete all as specified and as directed. Make -SOL-6319B of jaquar or equivalent in kohler.
S&F basin mixer with popup waste system, Hot and Cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and directed. Make:- Model No- DRC-37005 B of make Jaquar or Kohler.
S&F three way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and directed. Make- FUS-29273 UPR of Jaquar or Kohler.
S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed. Make - Jaquar Cat Part-No - 563 or equivalent in Kohler.
S & F CP paper holder complete all as specified and directed. Make-AKP-35751P of Jaquar or equvelent in kohler.
S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges including chromium plated brass screw and plastic cleats, (minimun weight 190 gms ) complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed all as specified and as directed.
S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed.
S&F brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete all as specified and directed.
S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long tixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F wash hand basins vitreous china flat back of size (450mm x 300mm) white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete all as specified and as directed.
S&F elegent mirror PVC cabinet coloured with towel rail of size (422 x 622) mm complete all as specified and as directed.
S&F cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.
S&F cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete all as specified and as directed.
Demolition and breaking up drain pipe 75/100mm dia ( Salt glazed ware, AC or PVC) of any type complete all as specified and as directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.
S&F PVC(SWR) bends any radius, 75 mm bore complete all as specified and as directed.
S&F PVC(SWR) bends any radius, 110 mm bore complete all as specified and as directed.
Dismantalling water tank and removal from site of capacity exc 500 ltr and n exc 1000 ltr complete all as specified and as directed.
M &L for 500 litres capacity rotational moulded polyethene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 20mm bore Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
Dismantling of cast iron pipe 75/100 mm dia joint in cement mortars and taking out of trench if required complete all as specified and as directed.
S & F cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in treanches or in floors of 75 mm dia complete all as specified and as directed.
S & F CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted with oval access door complete all as specified and as directed.
S&F mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and as directed.
Demolition of PCC of any discription and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed.
M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in floor etc complete all as specified and as directed.
M&L for chequered cement concrete tiles of size (20cm x 20cm) x 25mm thick, set jointed and pointed in neat cement slurry in floor with and including over 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L 25mm thick Sand filling under floors or in foundation including consolidation complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.
S&F corner glass shelf set of 3 Nos with bracket complete all as specified and as directed. Make- CAN-1173 of Jaquar or equvelent in Kohler.
S&F PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10 cm in with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) area of each tiles n exc 0.36 Sqm in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with and including over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.
Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modular plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall complete all as spd and directed by Engr- in- Charge for the following :- (a) One light point controlled by one switch one way
(b) One Ceiling fan/exhaust fan point controlled by one switch.
(c) One socket outlet 5 Amp controlled by one switch on independent board
(d) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete
(d) One bell point controlled by one bell push 5Amps complete
All as per Srl item No 109.00 above but one power point 6 pin 15 Amps socket out let with 4.0 Sq mm stranded copper conductor cable PVC insulated including earth wire 4 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed. Notes for Srl item No. 129.00 to 134.00:- (a) Cost for modular metal flush boxes and modular face plate shall be deemed to be included in unit rate. (b) Cost of cutting chases and making good the disturbed surfaces shall be deemed to be included in unit rate.
S&F of modular switch 1 way 6 Amps one module complete all as specified and directed.
Supply and fixing of modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed.
S&F of modular switch one way 16 Amps, one module complete, all as specified and as directed.
S & F of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.
Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.
Supply and fixing electric bell, multi music tyype, 230 volt AC, single pole complete all as specified and as directed.
Supply and fixing modular bell push 6 amp one module complete all as specified and as directed.
Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for battens fittings complete all as specified and as directed.
S&F of Indoor decorative LED battens integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
S&F of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
Supply and fixing LED bulb 12 watt with B22 base fixed in pendent holder / bulk head complete all as specified and as directed.
S&F decorative LED wall bracket light fittings made up of polycarbonate suitable for B22 base with and including one number 12 watt LED bulb complete all as specified and as directed. Make:- Halonix / C&S / Philips.
S&F in replacement of LED bldg security light highy 60 Watt with IP66 with internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete all as specified and as direted.
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole and neutral MCB 20 Amps complete all as spd and directed.
M&L for sub main wiring with undermentioned run of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 V grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 25 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface incl the specified run of specified size earth continuity conductor of similar type of cable complete all as spd and directed by Engr-in- Charge:- (a) 2 run of 4 sq mm and one run of 4 sq mm earth wire Note- The undermentioned runs of single core cable and specified earth continuity conductor and revelent conduit with fitting acessories will be measured as one run
Supply, installation and testing for maintenance free grounding (earthing) system complete buried directly in ground vertically (earth pit not less than ten feet below ground level) by making bore hole of 100mm dia for inserting one number 17mm dia molecular copper bonded high tensile low carbon steel circular earth electrode of 3 meter length with average copper thickness of 100 mircons alongwith environmental friendly grounding enhancing compound and heavy duty (HDPE) PVC pipe cap all in below ground level and connected to copper strip 25mm x 3mm flat by means of brass metal bolts, nuts and washers etc including protection pipe of GI 40mm bore Medium grade upto 7.5 meter length and connection of earth lead to maintain distribution/ LT panel board/ DG set with copper lugs complete all as specified and directed by Engineer-in-Charge. (Note:- Rate for necessary earth work, PVC pipe, copper strip and all materials supplied by the contractor is deemed to be included in quoted rate of item).
S&F exhaust fan with louver PVC body, 200mm sweep 230 volt, single phase, AC supply complete with suitable nuts, bolts and washers embedded in the wall including provisioning of flexible cord copper of size 1.5 sqmm three core from ceiling rose to exhaust fan for giving connection and providing continuous earthing connection with and including opening holes in existing wall and making good as per existing surface complete all as specified and as directed.
S&F 5 star ceiling fan with blades, down rods 1200mm sweep, 230 volts (single phase) including provision of stepped type electronic fan regulator to match with the switch boards main, air delivery 210CFM with service value 600 BEE, five star rated brushless direct current motor and flexible copper cord of size 1.5 sqmm of required length from ceiling rose to fan including connection and provn of MS fastener for hanging of ceiling fan complete all as specified and directed.
M&L of GI pipe light grade 32 mm dia bracket not less than 1.5 mtr long and bent to a shape for fixing of street lights including 2 Nos MS clamps made out of 25mm x 6mm MS flat including 04 Nos fully threaded bolts and nuts fixing on wall etc complete all as specified and directed.
S&F of Electric storage type water heater (Geyser) steel body with copper inner tank and heating element upto 2 KW, 25 litres capacity, 230 Volts single phase, BEE 5 star rated complete with all accessories like pressure release valve, nuts, bolts, washers etc and 02 Nos of 450 mm long flexible stainless steel pipes for connections, complete all as specified and directed.
RK TRADERS
VIJAY KUMAR GUPTA
DOLMA ASSOCIATES
M/s Navansh Engineers & Consultants
JAIPAL AND BROTHERS
DEV TRADERS
SHYAM ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .