Spl repair Recarpeting Appx Size 1000M of Road at Depot perimeter from guard post no 09 to Guard post No 055 pf 223 ABOD under AGE I SNS

Amount

Scarifying and picking graveled, macadam or bituminous macadam surface in area not exceeding 400 Sqm, depth exceeding 50mm and not exceeding 100mm and removing to a distance not exceeding 50m and stacking complete all as directed

M & L for 75 mm compacted thickness WBM, with coarse aggregate(granite, trap or basalt) of grading 2 ( 63 to 40mm ) spread, rolled with 8 to 10 tonne power road roller and consolidated to gradient, camber required complete all as specified and directed

M & L for 75 mm compacted thickness WBM, with old aggregate extracted from old surface after scarifying of grading 2 ( 63 to 40mm ) spread, rolled with 8 to 10 tonne power road roller and consolidated to gradient, camber required complete all as specified and directed.

M&L Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre of road surface complete all as specified and directed.

M & L for repair to pot holes any depth not exceeding 1 sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads path etc cutting around edges, at least 25 mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 kg per 10 sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @9.8 kg per 10 sqm blinded with 0.09 cum stone chipping 6.3 mm size and again well rammed ( including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed.

Material and labour for bituminous macadam laid , rolled and compacted to required gradient and camber ( consolidated thickness 75mm or less ) with paving bitumen VG-10 @4% by weight of total mix complete all as specified and directed.

Material and Labour for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of road surface complete all as specified and directed.

M&L laying, rolling, consolidating 30mm thick bituminous premixed asphaltic semi dense concrete with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber, complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roadspavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions specified and as directed by Engineer-in-Charge. Make : Greenlite/3M or equivalent.

M&L continuous brick edging with Burnt clay bricks of Sub class 'B bricks laid dry end vertically with width is equql to width of the brick and embedded brick in the ground to depth and tempering ground around bricks and removing surplus soil.

SUNRISE CONSTRUCTION COMPANY (BID ID -3277524)

MALHOTRA AND ASSOCIATES (BID ID -3277330)

ELECTRA ENGINEERS (BID ID -3281288)