Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ACCEPT |
| 2 | Rejected-Technical | Rejected-Technical Reject |
| 3 | Rejected-Technical | Rejected-Technical Reject |
| 4 | Rejected-Technical | Rejected-Technical Reject |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
12 Mar 2026, 3:00 pmClosed
Chief Engineer
A.D.A., Jaipur House, Agra
Facade lighting work at Shamshabad Marg underpass of Inner Ring Road.
2026_ADAA_1118974_3
29/2025-26
Open Tender
Electrical Works
Lump-sum
180 days
Agra Development Authority
Please refer Tender documents.
2 documents required · 2 mandatory
₹11,800
Secretary
₹2.1 L
30 May 2026
21 Feb 2026
13 Mar 2026
21 Feb 2026
12 Mar 2026
21 Feb 2026
Supply, Installation, Testing and Commissioning of state-of-the-art laser-cut / glowing & embellished panels , laser cut Metal sheet cladding, for the entire height of the Columns upto the ceiling. Also, on both the sides and the deck wall of the face of the underpass. fitted with LED lighting with electronic driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection,voltage input AC240V, estimated Lifetime-L70 @ 50,000hours minimum. Alongwith the proper moubting arrangement with the foundation plate. Final design as per the reference image attached, to be approved by the ADA.
Supply, Installation, Testing and Commissioning of LED RGBW round Spot flood Luminaire for Facade lighting with die cast aluminium housing, with powder coating of wattage 75W-85W. The beam angle of the fixture shall be medium. The luminaire shall have high optical efficiency PMMA/PC lenses. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 120 to 270 V AC, 50 Hz, power factor > 0.9. High power LED's shall be SMD type and fixture shall have system efficacy at System level (Not Chip Level) >=40 LPW, Life of fixture (Including Driver): 50K Hrs. @ L70 Lumen maintenance at 35 °C Ambient Temperature. minimum Internal Surge Protection 4KV, 20 kV external surge protector, must be having minimum IP66 & IK 07 Impact rating & IEC Classification Class I, RoHS. Fixture shall be suitable to operate at ambient temperature range of 0°C to +45°C. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, & TTC certificates should be provided from NABL accredited lab. ROHS compliant, BIS Certification for Luminaires & Drivers 5 Years Warranty. The work includes all the installation & mounting accessories, as approved by the department. (Make : Philips, Bajaj, Havells, Crompton, Surya as approved by E./Ic.)
Supply, Installation, testing & commissioning of complete Chemical Earth Pit System with inspection chamber and cover, 3m earth electrode, along with all the necessary accessories such as 25mm double compression Cable glands with Lugs, 19mm PG Cable glands with Lugs etc.
Supply and laying of 4.0 sq. mm x 3 core ISI marked, FRLS PVC insulated, single core copper conductor cable in exising conduits with proper connections, glands, etc.
Supply and Laying of one number 3.5core x25 sq mm Aluminium Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground or pipe or trench as required including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Supply and fixing IP67 weatherproof box for Power Supply with cable glands at input and output of the box, size of the box should be sufficient to accommodate the power supply of the fixtures.
DMX converter with 3 and 5 pin XLR points for programming of lights.
DMX Splitter- The DMX-512 splitter shall have minimum one DMX input and six DMX output connections, the sockets being standard 5-pin AXR connectors. The opto isolated DMX-512 splitter shall have a power on LED and DMX active LED indication on the front panel. The opto isolated DMX-512 splitter input shall be internally terminated.
DMX Cable 18 AWG 18/0.20 mm x 2 Core ATC copper conductor PE insulated, core twisted in a circular form inner sheathed with moisture proof polymer, beard shieleded (80% with ATC Copper, outter jacket with matt finished PVC.
Supply, installation, testing and commissioning of stand mounted panel made of 16 SWG GI sheet, double door and duly pretreated and power coated to make it weather proof. Astonomical timer MCCB 65 A, switch 3 pole TPN.
S/F of 1 mm. single core copper wire.
S/F of 1.5 mm. single core copper wire.
S/F of 2.5 mm. single core copper wire.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
T3.pdf
Tender Documents • 3.21 MB
BOQ_2080375.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .