Providing and fixing Godrej Make furniture in civil dispensary at Lok Bhawan Bhopal.

Please Enable Macros to View BoQ information

PROVIDING & FIXING GODREJ MAKE FURNITURE IN CIVIL DESPENSERY AT LOK BHAWAN BHOPAL.

Tenders are invited from OEM or their Authorized Dealers for supplying of furniture items, incase of dealers quoting for the project authorization from original manufacturer to be attached for this project.

PAC - Rs. 28,69,000.00 TIME ALLOWED - 11 MONTHS

S.NO ITEM UNIT QTY. RATE AMOUNT (In Figure) AMOUNT (In Words)

1 Providing And Placing of 3 fold partition screen : Overall dimension: L 2650 X W 640 x h1700 MM. The fixed Frame should be made of 25.4 mm dia 1.2 mm thick ERW tube with movable frame should made of 19 mm dia 1.2 mm thick ERW tube which is fitted with plastic hinges. 50 mm dia wheel castors should be provided. Partition is provided with double layered casement fabric whicjh should be opeque for proper modesty.All MS parts should be pretreated and powder coated with thermosetting epoxy polyester powder coating. Furniture Make- GODREJ Design as approved by Engineer-In-charge. EACH 1 Sixteen thousand six hundred eighty three

2 Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE : The Main Table should be of Size - 1650 x 750 x 750 with ERU of Size - 1200 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in- power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 1200 x 500 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security and footrest Approved Furniture Make - GODREJ (CII GREENPRO,UL GREENGUARD, GRIHA, SCS INDOOR ADVANTAGE GOLD, Greenguard Certified Product) Design as approved by Engineer-In-charge. EACH 2 One lac Ninty two thousand seven hundred seventy six only

3 Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE WITH PEDESTAL : The Main Table should be of Size - 1800 x 900 x 750 with ERU With Pedestal of Size - 1200 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-BACK UNIT power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 1200 x 500 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security should have footrest Approved Furniture Make - GODREJ (CII GREENPRO,UL GREENGUARD, GRIHA, SCS INDOOR ADVANTAGE GOLD, Greenguard Certified Product) Design as approved by Engineer-In-charge. EACH 2 Two Lacs sixty five thousand nine hundred ninty eight only

4 Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE : The Main Table should be of Size - 1650 x 750 x 750 with ERU of Size - 900 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in- power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 900 x 500 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security. Approved Furniture Make - GODREJ (CII GREENPRO,UL GREENGUARD, GRIHA, SCS INDOOR ADVANTAGE GOLD, Greenguard Certified Product) Design as approved by Engineer-In-charge. EACH 2 One lac eighty eight thousand four hundrd sixty only

5 Providing And Placing of EXECUTIVE MAIN DESK : The Main Table should be of Size - 1650 x 750 x 750 . The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-BACK UNITild power box are provided on work surface for wire management . Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security and a footrest .As per drawing & specification and directed by Engineer-in-Charge. Approved Furniture Make - GODREJ (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. EACH 2 One Lac seventy nine thousand three hundred seventy four only

6 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 900(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10). Approved Furniture Make - GODREJ Overall Size - 4800 W x 310 D x 785H mm. As directed by Engineer in charge. EACH 1 Fifty one thousand one hundred seventeen only

7 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 900(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10). Approved Furniture Make - GODREJ Overall Size - 3600 W x 310 D x 785H mm. As directed by Engineer in charge. EACH 1 Sixty nine thousand three hundred eighty only

8 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 900(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10). Overall Size - 4500 W x 310 D x 785H mm.Approved Furniture Make - GODREJ As directed by Engineer in charge. EACH 1 Eighty six thousand three hundred sixty seven only

9 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 900(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10).Approved Furniture Make - GODREJ. Overall Size - 900 W x 310 D x 785H mm. As directed by Engineer in charge. EACH 2 Thirty six thousand five hundred

10 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 600(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10). Overall Size - 1500 W x 310 D x 785H mm. Approved Furniture Make - GODREJ As directed by Engineer in charge. EACH 1 Fifty six thousand three hundred ninty four only

11 Providing And Placing of Wall Mounted Storage Units : Main unit should be of size 600(W). The add- on units should be stackable width wise to main unint to form bank of storage having common side panel. For corner unit, add on units should be stackable on the outer sides. Construction should be aethetically appealing completel knock- down construction made3 form 0.6 mm(+/-0.07mm) thk CRCA as per IS-513. Horizontal stiffner should be made from 1.2mm(+/-0.09mm) thk CRCA as per IS-513. Doors should be made form 18mm (+/-0.5mm thk. Interior grade should be Pre-Laminated particale Board as per IS-12823 or Plain particle board as per IS-3087 with 0.6 thick decorative laminate and 0.6 thick backing laminate as per IS 2046 on either side. All edges of the door should be duly sealed with 2mm thk PVC edge bending. 300W and 450W units should have single door with lock. 600/800/900 wide units should have 2 door with single lock on RH door. Corner units should have two separate door with individual lock. Locking should be 10 lever cam lock with lock lever at the bottom of the door. Shelving should be of 1 no. height wise adjustable shelf with 6 positions adjustment. Load capacity of the shelf/ Bottom shelf =25 kg UDL maximum. vertically on shelf/ bottom. Finish should be epoxy powder coated to the thickness of 50 microns(+/-10). Overall Size - 600 W x 310 D x 785H mm.Approved Furniture Make - GODREJ As directed by Engineer in charge. EACH 1 Fourteen thousand nine hundred seventy four only

12 Providing And Placing of Hospital Semi Fowler Bed With 2 Section Mattress : The bed should be single function bed which should have adjustable backrest. The height should be 560mm as per the human anthropometric study. The overal size hsould be L - 2157 mm x W - 990 mm x H - 560 mm. The bed frame should be ERW Rect Tube of section 30 mm x 60 mm and thicknes of 1.6 mm, ERW Rect Tube of section 40 mm x 60 mm and thicknes of 1.6 mm with ERW Round Tube of Ø 25.4 mm and thickness of 1.6 mm. The lying surface frame of ERW Round Tube of section Ø 25.4 mm and thickness of 1.6 mm. The understructure of ERW Round Tube Ø 31.75 mm and thickness of 1.6 mm. The lead screw should be thread rolled En8 with ACME threads and 6 mm pitch gives goo strength with ease of operation. The handle should be PPCO with snap locking handle lever with handle body to keep it in folding position when not in use. The head board and leg board should be of PP with food grade recyclable material. It should be tough, durable & light weight. The lying surface should be of sheet metal of 1.0 mm thickness. The lying area should consists of mattress retainer to define the position of the mattress. The castors should be high endurance sleek series castors and provided with dual locking arrangement and are diagonally placed. and the wheel dia should be 125 mm & stem dia should be 22 mm. The final finsh should be powder coating with anti rust and thermosetting epoxy polyster formulated to fulfill the requirements for surface protection. All powder coated part should be in RAL white & other plastic parts should be in Pantone cool grey 8C. The maximum load capacity should be 135 kg with backrest elevation of 70ᴼ. Mattress should have 2 section 100 mm mattress and made of 40 density pu foam. The mattress should have high end heavy hellium cover which is water resistant, x ray permeable, Approved Furniture Make - GODREJ EACH 2 One lac fifty six thousand eight hundred seventy six only

13 Providing And Placing of Hospital Locker with Cabinet: The locker should be with one cabinet with stainless steel top and the rest structure should be in MS powder coated. The cabinet should be provided with cam lock. The overall size should be L - 402 mm x W - 404 mm x H - 835 mm. The structure should be ERW Sq. Tube of section 25.4 mm and thickness of 1.6 mm. The shoe should be PVC + Nitrile for avaiding metal contact with ground. The top should be SS 304 sheet of thicknes 0.8 mm. and the cabinet should be CRCA with thickness of 1.0 mm. The cabinet door should be provided with ventilation holes and lock. The ahndle should be ABS recessed handle to open the cabinet door. The final finish should be of powder coating with epoxy polyster with RAL white powder, the rubber and plastic parts shoudl be in grey and the SS Top buffed mirror finish. Approved Furniture Make - GODREJ. Design as approved by Engineer-In-charge. EACH 2 Forty six thousand seven hundred thirty only

14 Providing And Placing Height Adjustable Table : Double column height adjustment table should comes with an electric motor incorporated at the center of cross member in the understructure which gives an adjustable work surfaces range from 560 to 1190 mm height from ground The Worktop size shall be 1200 x 600mm Top is to be made of 25mm thick Pre-Laminated board of interior grade conforming to IS: 12823. All the edges of the panel are provided with machine pressed 2mm thick PVC lipping. Understructure comprises of a combination of ERW mild steel rectangular tubes of varying sizes(75X75X1.5thk; 70X70X1.5thk; 65X65X1.5thk) and 3mm thk H.R (as per IS:2062) welded and fixed together to form the skelton.The understructure is coated with min. 45 micron thickness of epoxy polyester powder. Approved Furniture Make - GODREJ (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. EACH 1 Fifty three thousand five hundred forty three only

15 Providing And Placing of Revolving EXECUTIVE HIGH BACK CHAIR : SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE : 52.0 cm. (W) x 83.0 cm. (H), *SEAT SIZE : 54.0 cm. (W) x 51.5 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. · 3 position locking with anti shock mechanism.· Tilt tension adjustment.Approved Furniture Make- Godrej (CII GREENPRO, UL Greenguard Gold, GRIHA, SCS INDOOR ADVANTAGE GOLD, BIFMA Level 2 Certified Product.) Design as approved by Engineer-In-charge. EACH 1 Thirty thosand six hundred forteen only

16 Providing And Placing of 3 Seater Lounge Chair With Cushion : Having Seat Shell to be a welded assembly of seat, back and side frame. The Seat & Back frame is to be made up of 1.2mm thk CR steel with Oblong perforations. This is to be welded with side frame of size 32mm width x 5mm thk HR steel. The welded assembly is to be powder coated . The seat shall have have front waterfall edge to provide popliteal clearance for comfortable seating. It shall also have buttock suppport curve for comfartable sitting. SEAT Size- 47.8cm W x 44.6cm D. Back Size- 41.6cm W x 23cm H. Understucture:- Shall consist of connecting beam and leg assembly made up of MS ERW oblong tube of size 75mm x50mm x 2mm thk it shall be welded stucture assembly in powder coating which is to be fitted with shoes and levelers in nylon. Connecting beam shall be fitted with snap locking end cap. Armrest: Armrest assembly shall consist of armrest frame and armrest pad. The Armrest frame size shall be 31.7mm x 4.7mm thk HR steel and it should be powder coated. Armrest pad shall be injected moulded in Nylon and is to be fitted on armrest frame. Overall Dimensions 169.5cm W x 63.8cm D x 44.1cm SH x 78.5cm H. Approved Furniture Make - GODREJ (Greenguard Assurance Certified Prod.) Design as approved by Engineer-In-charge. EACH 6 Two Lacs sixty two thousand six hundred forty four only

17 Providing and Placing of WALL SIDED TABLE : 1)Length(mm) X Depth(mm) X Height(mm):2500X750X900 2)Switch Sockets: 4 units 5)Storage Unit Qty:1 6)Dimension: 450W-450D-674H/ 1Shutter- 1Drawer 7)Worktop: Granite. Approved Furniture Make - GODREJ. Design as approved by Engineer-In-charge. EACH 1 One Lac fifty three thousand eight hundred eighty four only

18 Providing And Placing of Mobile Pedestal : Under Main Table - Supplying free standing pedestal for office table with dimensions 390 (w) X 440 (d) X 646 (h).Free Standing Full Height Mobile Box Box File. Construction is of Welded Assembled 0.8 thk CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener. 1.2 thk CRCA Top Stiffener & Bottom stiffener. drawer fronts are Metal Front Straight Edge. All Drawers with Double extension precision ball slide 390 wide Pedestals File drawer suitable for storing Fullscape Ezee & Visa files in Depth wise manner. A4 files in width wise manner For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking is of 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism for ‘BoxBoxFile’Pedestal. Top panel Metal Straight Edge Top. the castors are of Swiveling nonlockable Castors mounted below the body shell for Free Standing Full Height Mobile Pedestal. Fifth roller arrangement mounted below File drawer to avoid toppling of unit when file drawer is pulled out. Finish is of Epoxy Polyester Powder coated to the thickness of 50 microns (+/10).Approved Furniture Make - GODREJ (CII GREENPRO, UL GREENGUARD, SCS INDOOR ADVANTAGE GOLD Certified Product.) Design as approved by Engineer-In-charge. EACH 3 Sixty one thousand six hundred sixty two only

19 Providing & Placing of Slotted Angle Rack : The Slotted Angle racks should be of size - 8'H x 3'W x 1.5'D Ft. having 8 shelves with 8 bend Panel 0.8mm thick. All shelves is to be made from 20 guage sheet. Slotted angles shall be 38 x 38 x 1.8mm thk. & 2500mm lenght . Design as approved by Engineer-In-charge. EACH 1 Twenty thousand eight hundred fifty three only

20 Providing And Placing of Examination Couch with full storage and with steo stool : BASE FRAME is to made from ERW 30X30 TUBE AS PER IS:7138 of 1.6mm thickness. CABINET - is to be made from 1.0 mm THK CRCA AS PER IS:513, PHandle,Lock And Door Catch. DRAWER are to be form 1.0 mm THK CRCA AS PER IS:513, Provided with recessed plastic handle smoother function due to double extension ball-slide. MATTRESS PLATFORM shall be 12 mm THK PU + LEATHRITE +PLY.ntegrated pu foam upholstered with leathrite and strenthen with ply at bottom. ADJUSTABLE HEAD REST shall be 12 mm THK PU + LEATHRITE +PLY, head rest can be adjusted by gas spring with actuating lever.TISSUE ROLL HOLDER is to made from 1.2 mm THK SS304 Section 012.7 ERW TUBE 010.0 ROD to keep the tissue roll. IN~BACK UNITILT STEP STOOL is to made from 1.0 mm THK CRCA AS PER IS:513, provided with recessed plastic handle and can be slide-in and out on the ball slide for the use. LEVELER to made from Plastic With Metal Insert . BP APARATUS HOLDER TRAY is to made from 1.0 mm THK CRCA AS PER IS:513,provided to keep bp aparatus. AS per attached layout. Approved Furniture Make - GODREJ (Greenguard/GIRHA/ BIFMA Level 2 Certified ) Design as approved by Engineer-In-charge. EACH 1 Seventy one thousand two hundred fifteen only

21 Providing And Placing of Steel Stool : Seat Assembly It is circular type dia. 30.00 cms. And made of 20 BG thick CR steel. It is welded to the understructure and black powder coated.Understructure Assembly: The understructure is made of M.S.tube dia. 2.2 Cms. (7/8”) x 18 BG thick M.S. ERW tube. It is welded to the MS fabricated circular seat assembly and black powder coated. The understructure is provided with black PP injection moulded ferrules. Approved Furniture Make - GODREJ (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. EACH 5 Fourty three thousand nine hundred fifteen only

22 Providing And Placing of Saline Stand ; Telescopic height adjustable saline stand mounted on castor. Over all dimension should be 695 mm dia base circle with ht adj from 1568 mm to 2121 mm.The 4 pronge bottom frame should made of 1.6 mm thick mild steel and the lower basement should be 3 mm dia with 1.6 mm thick ms tube. Four nos.high endurance anti static plastic moulded 50 mm castors should be provided with dual locking. The telescopioc rod should be 19 mm dia , 1.6 mm thick ss 304 grade tube with locking knobe. 4 nos hooks are provided for hanging saline bags. The telescopic tube should have plastic bush at the bottom which provide smooth linear motion during ht adjustable. All the ms part are pretreated with 9tank process with zinc phosphate and powder coated with anti microbial epoxy polyester powder coating. Make - Godrej. Design as approved by Engineer-In-charge. EACH 1 Eleven thousand five hundred thirty four only

23 Supplying & placing SDU Storage unit with an overall size 750mm X 450mm X 750H mm. Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The SDU runs in a PVC track mounted on the TOP and Bottom panel of the Body. All the storages are fitted with a 6 mm leveler at bottom for leveling. Approved Furniture Make - GODREJ (Greenguard,GRIHA,BIFMA Certified Product.) Design as approved by Engineer-In-charge. EACH 2 Fourty nine thousand two hundred eighteen only 20851.18

24 Providing And Placing Stretcher on Trolley: The stretcher on trolley should have a removable stretcher mounted on a sturdy trolley having castors for ease of movement. The overall size should be L - 2005 mm x W - 666 mm x H - 830 mm. The trolley should be made of E.R.W Tube of section Ø 31.75 mm and thickness of 1.6 mm, Ø 25.4 mm and thickness of 1.6 mm & Ø 25.4 mm and thickness of 1.2 mm for providing the base to rest the stertcher on its four resting pads. The holder of the stretcher should be made of M.S, which is used to hold the stretcher in position on to the trolley. The caster wheel should be of Ø 200mm wheel with diagonal locable castor. The stretcher should be made of E.R.W tube of Ø 25.4 mm and thickness of 1.6 mm which should be removable from trolley to provide flexibily of reach. The stretcher top sheet should be CRCA sheet of thickness 1.2 mm. There should be provision for mounting I.V. Pole with mounting stem Ø 12.8 mm and themounting position should be diagonally opposite. The final finsh should be powder coating - epoxy polyster with M.S. part ib RAL White and plastic parts in Pantone cool grey. Furniture Make- Godrej (CII GREENPRO) Design as approved by Engineer-In-charge. EACH 1 Thirty seven thousand six hundred eighty only

25 Providing And Placing of Revolving HIGH BACK CHAIR : SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE : 52.0 cm. (W) x 83.0 cm. (H), *SEAT SIZE : 54.0 cm. (W) x 51.5 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. · 3 position locking with anti shock mechanism.· Tilt tension adjustment. Approved Furniture Make - GODREJ (Greenguard Assurance Certified Prod.) Design as approved by Engineer-In-charge EACH 7 One lac eigty two thousand six hundred fifty eight only

26 Providing And Placing of Revolving FULL BACK CHAIR : SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE : 52.0 cm. (W) x 83.0 cm. (H), *SEAT SIZE : 54.0 cm. (W) x 51.5 cm. (D), HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. · 3 position locking with anti shock mechanism.· Tilt tension adjustment. Approved Furniture Make - GODREJ (Greenguard Assurance Certified Prod.) Design as approved by Engineer-In-charge EACH 4 Sixty thousand and sixteen only

27 Providing And Placing of Visitor Chair Fixed : The chair having SEAT/BACK ASSEMBLY made up of 1.2 ±O.1cm. thick hot-pressed plywood and upholstered with-fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat to be extra thick foam on front edge to give comfort to popliteal area. BACK SIZE shall be 47.5 cm. (W) x 58.0 cm. (H)and SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) with HIGH RESILIENCE (HR) POLYURETHANE FOAM to be.moulded with density =45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The ARMRESTS :The one-piece armrests are injection moulded from black Co. polymer Polypropylene. The reading chairs shall have TUBULAR FRAME which is powder coated (OFT 40-60 microns) tubular frame is cantilever type & made of 02.54 ±0.03cm. x 0.2 ±0.016cm.thick. M.S. ER.W. Tube. Approved Furniture Make - GODREJ (CII GREEN PRO, SCS INDOOR ADVANTAGE GOLD, GRIHA Certified product) Design as approved by Engineer-In-charge. EACH 15 One lac forty two thousand six hundred ninty five only

28 Providing And Placing of Desk Base Recta Work Station with Storage: The Worktop shall be made of 25mm thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Grommet or Access flap cutouts to be provided on worktop. Worttop should be of size - 1500 x 750 x 750mm . Legs should be three dimensional which has inclination in 2 planes, it has a ball socket M8 leveler with bottom translucent cap , that allows adjustment up to 50 mm height. to be fabricated from MS ERW Tube 50 mm x 25 mm x 1.2mmthk (as per IS: 7138 ERW) along with a PDC (Swing leg corner PDC) part made from Aluminum alloy, which is connected to the worktop and cross members. Common Modesty Panel should be Acrylic (8 mm thk Acrylic both side frosted) or Metal leg modesty (1.2 mm thk CRCA IS: 513). Cross members / connectors are to be made from 50 mm x 25 mm x 1.2mm thk (as per IS: 7138 ERW). • Cross members are to be assembled by friction fit PDC joinery and Grub screws. Cross members are to be mounted at a distance of 165 mm from worktop sides. • Certain cross connectors are to be fabricated by welding (Argo shield) 3mm thk HR (as per IS: 2062) plate at end/ends. Comibination of HDU and pedestal Storage unit with an overall size 900mm X 450mm X 750mm. Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment should have footrst. Approved Furniture Make - GODREJ (CII Greenguard,GIRHA, BIFMA Level 2, SCS INDOOR ADVANTAGE GOLD Certified Product.) Design as approved by Engineer-In-charge. EACH 2 One lac fifty thousand one hundred and four only

29 Providing And Placing of RECTANGULAR WORKSTATION / Linear Workstation of Size: 1050mm(W) x 600mm(D) Supply of workstations in panel based modular partition system of 1200mm Height And overall thickness shall be 52.4mm. Bottom tiles should be metal/laminate, intermediate blocks laminated and two tiles should be fabric. panel should be comprise of 2 nos. of vertical extrusions made of aluminum. Horizontal extrusions shall be made of aluminum at every division of tile/block. The numbers of these horizontal extrusions should be four. A block panel's thickness shall comprise of 38mm thick paper honeycomb, plus 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. Numbers of these blocks shall vary as per panel height.1 number of fabricated bottom frame as a welded structure of steel components. 2 nos. of bottom tiles. 2 nos. of top tiles. 1 no. of top trim shall be made of aluminum extrusion. These panels shall be supported on legs with leveler at various locations depending on the layout requirements for better Air circulation in the area. Panel legs shall be fabricated by CO2 welded MS Tube of section 38 mm x25 mm (IS: 7138 ERW Tube, 38 mm x 25 mm x 16bg) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler is fitted. coated with average 50 to 60 micron thicknedd of epoxy powder coating. fabricated bottom frame for 52.4 mm panel comprises of L channels made of 2 mm thick CRCA steel , formed plates of 3 mm thick HR steel & ERW steel tube of size 35X15X1.6 mm thick in oval cross section welded together.Approved Furniture Make - GODREJ (CII Greenguard,GIRHA, BIFMA Level 2, SCS INDOOR ADVANTAGE GOLD Certified Product.) Design as approved by Engineer-In-charge. EACH 2 One lac forteen thousand and fifty two only

30 Providing And Placing of RECTANGULAR WORKSTATION / Linear Workstation of Size: 1500mm(W) x 600mm(D) Supply of workstations in panel based modular partition system of 1200mm Height And overall thickness shall be 52.4mm. Bottom tiles should be metal/laminate, intermediate blocks laminated and two tiles should be fabric. panel should be comprise of 2 nos. of vertical extrusions made of aluminum. Horizontal extrusions shall be made of aluminum at every division of tile/block. The numbers of these horizontal extrusions should be four. A block panel's thickness shall comprise of 38mm thick paper honeycomb, plus 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. Numbers of these blocks shall vary as per panel height.1 number of fabricated bottom frame as a welded structure of steel components. 2 nos. of bottom tiles. 2 nos. of top tiles. 1 no. of top trim shall be made of aluminum extrusion. These panels shall be supported on legs with leveler at various locations depending on the layout requirements for better Air circulation in the area. Panel legs shall be fabricated by CO2 welded MS Tube of section 38 mm x25 mm (IS: 7138 ERW Tube, 38 mm x 25 mm x 16bg) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler is fitted. coated with average 50 to 60 micron thicknedd of epoxy powder coating. fabricated bottom frame for 52.4 mm panel comprises of L channels made of 2 mm thick CRCA steel , formed plates of 3 mm thick HR steel & ERW steel tube of size 35X15X1.6 mm thick in oval cross section welded together and footrest.Approved Furniture Make - GODREJ (CII Greenguard,GIRHA, BIFMA Level 2, SCS INDOOR ADVANTAGE GOLD Certified Product.) Design as approved by Engineer-In-charge. EACH 1 Sixty one thousand one hundred forty only

(Rs.Twenty eight Lacs sixty nine thousand and fifty six only )

Sub Engineer Sub Divisional Officer Executive Engineer

Raj Bhawan,Section P.W.D. City Sub Dn.no.1 P.W.D. Maint. Dn. No.1

Bhopal Bhopal Bhopal

(mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer P.W.D. Maint. Dn. No.1 Bhopal

Name of Work: Providing and fixing Godrej Make furniture in civil dispensary at Lok Bhawan Bhopal.

Contract No: 2026_PWDRB_479285

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Providing and fixing Godrej Make furniture in civil dispensary at Lok Bhawan Bhopal. BI01010001010000000000000515BI0100001113 0.000 Nos Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select