Complete Shifting, Repairing, reconditioning, installation and commissioning of 2 nos HEMM Washing plant at Excavation workshop of Akkocp, BnK Area.

Amount

Dismantling of existing washing pump engine and all electrical and mechanical fittings like baseplate ,delivery joints, electrical wires and its control switch etc

Complete dismantling of reciprocating type engine pump.

Fabrication and dynamic balancing of reciprocating piston

Fabrication of v belt pully assembly

Complete fitting ,assembling and shifting of reciprocating washing pump set with all electrical accessary and trial run at site

Finishing with Epoxy paint (two or more coats) complete pump set and applied as per manufacturer’s specifications including appropriate Priming coated.

Providing and fitting of pulley v belt .

Fabrication of new baseplate with nut bolt

Replacement of washing pressure gun

Supply and fixing of Hydraulic pressure hose (5500 Psi ,25 mm) for washing

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as require

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Fabrication of 1 nos fixed type Sheds for washing plant (pump motor and starter )

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing G.I. Union in G.I .pipe including cutting and threading the pipe and making long screws etc. complete (New work)

Providing and fixing gunmetal gate valve with C.I. wheel of approved quality (screwed end) :

Dismantaling of existing washing pump engine and all electrical and mechanical fittings like baseplate ,delivery joints,electrical wires and its control switch etc

Fabrication of new baseplate with HT nut bolt

Replacement of washing pressure gun

Complete fitting ,assembling and shifting of Automatic boster washing pump set witth all electrical accessary and trial run at site

Finishing with Epoxy paint (two or more coats) complete pump set and applied as per manufacturer’s specifications including appropriate Priming coated.

Supply and fixing of Hydraulic pressure hose (5500 Psi ,25 mm) for washing

Providing, laying and fixing following dia G.I. pipe (mediumclass) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as require

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing G.I.Unionin G.I.pipeincluding cutting and threading the pipe and making long screws etc. complete (New work)

Providing and fixing gunmetal gate valve with C.I. wheel of approved quality (screwed end) :

Total impact of GST for the purpose of CTC