Renovation eight nine and tenth floor of GJB at TMH

Amount

Civil Work Dismantling tile work in floors and roofs laid in cement mortar including stacking material as at a place directed by EIC and disposing the unservicable materuial out of TMH premises as per local authority approval and norms.

Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking as at a place directed by EIC and disposing the unservicable materuial out of TMH premises as per local authority approval and norms.

Of area 3 sq. metres and below

CEMENT PLASTER (IN FINE SAND)

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying 20mm thick waterproof cement plaster in two coats over existing masonary /concrete surface with base coat in cement mortor 1:4 12mm thick and neat cement and chemical coat finish of approved make over finishing coat in cement mortor 1:3 8mm thick including supplying and adding waterproofing compound of 2% by weight of cement for base coat including removing existing old/damaged plaster and hacking existing masonary and concrete surface, curing, required scaffolding and removing all debris out of premises etc complete as specifed and directed by the Engg-In Charge.

BRICK BAT BREAKING- Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material out of TMH premises as per local authority approval and norms.

BRICK BAT COBA : Providing water proof brick bat coba of depth from 9inch to 24inch thick or as per site requirement for filling in the depressions and sunken portions in toilet bathrooms W.C. drying area etc. at all floors and locations as per the specifications of specialized water proofing agencies and finishing the top surfaces even using c.m. 1:3 and approved water proofing compound 2% cement weight etc. complete all as directed by the engineer in charge.Note: The measurements shall be on cubic meter basis. No deductions shall be made for the areas occupied by w.c. pans and other fittings and fixtures ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

CUDDAPAH :Providing & laying 35mm thick cuddapah stone slabs in platforms / sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved by engieer in-charge, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm

Polishing Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish out of TMH peramises as per local authority approval and norms.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials out of TMH premises as per local authority approval and norms..

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes, unservicable materuial out of TMH premises as per local authority approval and norms.

(a) Internal Work- Exposed on wall

WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on Wall 15 &20 mm nominal outer dia Pipes (SDR-11). Concealed work, including cutting chases and making good the walls etc.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality by engieer in-charge, High or low pressure, with plastic floats complete :

15 mm nominal bore

20 mm nominal bore

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer In-Charge.

Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : or as per the direction of Engineer In-Charge.

W.C. pan with ISI marked white solid plastic seat and lid

BRASS FITTINGS Providing and fixing C.P. brass bib cock conforming to IS:8931 : of make approved by Engineer In-Charge.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) conforming to IS:8931 of make approved by Engineer In-Charge.

15 mm nominal bore

C.P 2-way bib cock: Removing existing C.P 2-way bib cock and Providing & fixing approved make C.P 2-way bib cock including including cost of jointing materials and necessary plumbing connections etc. as per requirement complete as directed by the Engineer In-Charge.

Providing and Fixing Hand spray with PVC connection as directed by Engineer In-Charge.

Providing and Fixing C.P. Hook or stand for Jet spray as directed by Engineer In-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231of make as approved by Engineer In-Charge, with all fittings and fixtures complete.

10 litre capacity - White

P/F Fancy SS coat hook single type as directed by Engineer In-Charge. For all toilet

Providing and fixing toilet paper holder : as directed by Engineer In-Charge. C.P. brass

SOAP DISPENSER :Providing C.P. brass heavy quality liquid soap dispense C.P. push type brass brackets caps etc. and fixing in position with brass screws including providing and fixing rawl plugs in the wall and redoing the walls etc. all complete of make as approved by Engineer In-Charge. (work includes removing old fixtures also). For Counter Wash basin

Fancy bathroom mixer ( hot & cold ) cock of make as approved by Engineer In-Charge.

Provding and Fixing heavy duty C.P beass heavy quality overhead shower of any shape kit with all necessary allied work of make as approved by Engineer In-Charge.

Providing & fixing at all heights, levels and locations colour finish characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with

0.71 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of make as approved by Engineer In-Charge., steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & applying one / two coats of primer two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Nerolac / Dulux to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions, doors etc. including removing existing paints , nails , screws , battens etc. and thoroughly scrapping the surface with sand papers filling up crevices and levelling with putty of Asian make necessary to obtain smooth surface ie. complete surface preparation etc. complete as directed to the entire satisfaction of Engineer In-Charge.

With one coat of primer and two coats of paint Using Luster paint

Synthetic Enamel Same as above with one coat of wood primer / red oxide

Providing and applying White wash / Geru ….. Etc. complete.

Providing and applying three coats of White wash to ceiling etc. including removing existing nails , screws , battens etc. and thoroughly scrapping the surface with sand papers, filling up the crevices and levelling with putty if necessary adding, required quantity of Fevicol DDL brightness to obtain good finish to surface complete as directed by Engieer In-Charge.

Carpentary Work Providing and fixing cabinet door shutter below table or over head cabinet made out of 19mm thick commercial ply with 6mm thick. T.W.lipping patti front side laminated with 1.0mm approved colour and make all around the door shutter outlet face approved make and colour, non laminated area should be two coat of french polish including necessary fittings like hinges, door handles, screws and Godrej make multipurpose lock, C type powder coated handle, tower bolt, ball catches etc. complete. all as specified and directed by Engineer-In-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) as directed by Engieer In-Charge. Second class teak wood

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete as directed by Engieer In-Charge. 25 mm diameter.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : as directed by Engieer In-Charge.

2nd class teak wood 50x12 mm

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of make as approved by Engineer In-Charge..

1.0 mm thick

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as directed by Engineer In-Charge.

Providing and fixing mortice lock (right or Left) with handle of approved make (DECO GOLD 152077 to the existing shutter including other necessary work, cost of all other material labour etc. all complete as directed by Engineer In-Charge.

Removing existing mortice lock providing and fixing new mortice lock with handle set.

Providing and fixing mortice lock handle set only.

Providing and fixing bacalite of approved shade / make sheet door shutter with frame (aluminium ) required size and of approved colour frame made out from Rectangular / H / A section of 14 gauge 15 micron anodized / powder coated 20mm x 40mm zindal section with aluminium hinges / SS hinges, handles / knob /aldrop tower bolt / all locking arrangement etc. all as per directed by Engineer In-Charge.

Single leaf shutter with powder coated aluminium frame (Heavy duty)

Double leaf shutter with powder coated aluminium frame (Heavy duty)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as directed by Engineer In-Charge.

Float glass panes

5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Removing existing louvers and Providing and fixing in position aluminium adjustable louvers glazing etc. with extruded and integrated anodised (15 micron) aluminium section manufactured to relevant I..S. standards specifications and glazing with frosted / Bajri glass, aluminium beeding, PVC lining, brass cadium plasted screws, mastic filling with strips, nuts, washers, etc. fixed on plastered surfaces including required scaffolding etc complete as directed by Engineer In-Charge

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Supply of labour on daily wages in all TMC premises as per requirement basis are follows

Helper

Providing and fixing in position aluminium openable window shutter with frame fully glazed / aluminium grills with using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminium beeding channels with two way rubber gasket / PVC lining to ensure water tightness and no rattling for aluminium grill fixing with F channel beeding using satin finish anodized 15 micron jindal approved havey duty sections for shutters and frame of required size and sections including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type aluminium handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge. Openable windows with glass shutters

Electrical Work DISMANTLING :- Providing qualified Wireman and a helper with tools for carrying out dismantling of entire floor includes all existing light, fan, bell, independent plug point, smoke detector, Response Indicator wiring of all types includes Electrical, Fire, Telephone with accessories and cable & Switchgear in an approved manner as per instruction of Engineer Incharge & removed material to be handed over to Engineer Incharge

Electrical work in Single Room : Providing ,fixing and commissioning of Conceled Lighting, Power, Bell & TV points inclusive of Back boxes, Cover Plates, Switch, Sockets, TV Socket, Telephone Socket, Bell with buzzer and indicator complete, including its wiring from SPN DB inside room to Power & Switch Boards inside rooms by laying 1.5/2.5sqmm copper conductor PVC insulated FRLS of 1100 V AC grade wire Polycab/RRK/Finolex make in MMS casing capping/conduit of Precision make with Modular switch of Legrand-Myrius & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete exclusive of TV & telephone outlet wiring. Also includes providing & fixing of SPN 8 way IP 43 with Acrylic door with 32A, DP, 100mA RCBO as Incomer and 6 Nos, 6-32A SP MCB's as outgoing, Ceiling fan of 1200mm Energy Efficient BLDC Motor Atomberg make, Telephone Instrument Panasonic KX TS 500 B make & Philips light fixture of 18W of suitable design as per site requirement and prior approval from Engg-in-charge as follows: Light Point Primary upto 7mtr-8, Power Point 6A - 1, Power Point 16A - 2, Set of two 6A Power Point - 3, Ceiling Fan 1200mm - 2, Light fixture 18W - 6, telephone outlet - 1, Bell Point - 1, TV point - 1,

CHAPTER 1 - POINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete.

Primary point upto 4 mtrs length

Primary point length 4 mtrs to 7 mtrs

Primary point length 7 mtrs to 10 mtrs

Secondary point Extending from Primary point upto 4 m

Half point on same board with 5A S/W and 5A Socket.

Concealing of 25mm dia. Pipe with surface finish.

Concealing of 6"X 6" Box or lower size with surface finish.

Supply & installation of surface Board Legrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring)

6Amp Switch&Socket

6A socket-2 nos+6A switch 2 nos

16Amp Socket + 16A Switch with Indicator

CHAPTER 2 - SUB MAINS Mains :- Providing Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete.

2 x 1.5 sq mm -+ 1.5sqmm Earth wire

2 x 2.5 sq mm -+ 1.5sqmm Earth wire

2 x 4 sq mm -+ 2.5 sqmm Earth wire

Distribution Boards: Supply, installation, testing & commissioning TPN DBs with per phase Isolation with RCCB of 25/40A 100mA for each phase complete with all outgoing SP MCB 6-32A and incomer MCB of FP 32/63A Legrand make complete with required internal copper leads and wiring.

TPN 8 way IP 43 with Metal door

TPN 12 way IP 43 with Metal door

Supply, installation, testing & commissioning VTPN 4 way IP43 Metal Double Door DB with all outgoing TP C curve MCB 40A and incomer 63A FP C curve MCB Legrand make complete with required internal copper leads and wiring.

SITC of Legrand DX3 make AC MCB of C Curve FP 6-32A with Metal enclosure Legrand make and connected with leads on incoming and outgoing side duly completed in approved manner.

LED fixtures:- SITC of Surface /Suspended / Recessed Mounted luminaires Philips Make with all required accessories.

Sleek Surface Downlighter Surface Mounted - DN251C LED16S-6500 PSU WH

SmartBright BN021C LED22S PSU 6500 WH

Energy Efficient Ceiling Fans -Supply, fixing & commissioning ceiling fan white/brown coloured including Safety Chain for Ceiling Fans for providing secondary support and heavy gauge down rod as per site condition. Atomberg EFFICIO make. Size 1200mm

Supply, fixing & commissioning exhaust fan 225mm Metal Body Heavy Duty TransAir including all required accessories for fixing.

Storage Water Heater/Geyser:- Supply, installation, testing and commissioning of Racold make CDR model heater along with all accessories complete horizontal 50Ltr capacity with 3-5 star mark.

Cable Glands - Double Compression with Termination:- Supplying and erecting heavy duty flange type brass cable glands for armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs. 3 to 4 core 16-50 sq mm

TELEPHONE & TV SECTION CHAPTER 6 - Telephone Wiring :- Supplying and laying 0.5 mm gauge unarmoured telephone wire D.O.T approved,Dlink/Finolex/Digilink/Polycab make with conduit/casing caping labling/marking/ferruling complete. 2 pair 0.5 mm telephone cable

Supplying and laying of 0.5 mm gauge armoured telephone cable of Dlink/Finolex/Digilink/Polycab through exisitng conduit/casing caping/cable tray. 50 pair telephone Armoured cable

Supply, Installation, of crone connector tag block (Make-Krone) in Powder coated sr metal box. 2 x 50 ways tag block

Supplying and erecting following cable / wire with appropriate size casing caping or rigid PVC heavy guage pipe of approved make (Precision) with PVC accessories to make complete piping rigid, install in or wall / ceiling / concrete with PVC spacers, sadd clamps by suitable clips to complete the pipe erected etc as per Instruction of Engineer in charge. RG 6 Coaxial cable

Ceiling Fans, Wall Fans, Exhaust Fans, Pedestal Fans -Supply, fixing & commissioning ceiling fan white/brown coloured including Safety Chain for Ceiling Fans for providing secondary support and heavy gauge down rod as per site condition. High breeze/high speed make : Crompton. Exhaust fan 225mm Metal Body Heavy Duty TransAir Crompton/Almonard make

Energy Efficient Ceiling Fans -Supply, fixing & commissioning ceiling fan white/brown coloured including Safety Chain for Ceiling Fans for providing secondary support and heavy gauge down rod as per site condition. Atomberg EFFICIO make. Size 1200mm

SITC of Legrand DX3 make AC C curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner. 6 to 32 A DP MCB 10 KA

SITC of Legrand make Metal Encloser for DP/TP/FP MCB and connected with leads on incoming and outgoing side duly completed in approved manner.

Electrical work in Toilet & Bathroom Blocks : Providing ,fixing and commissioning of Conceled Lighting, Power points inclusive of Back boxes, Cover Plates, Switch, Sockets complete with its wiring from DB by laying 1.5/2.5/4sqmm copper conductor PVC insulated FRLS of 1100 V AC grade wire Polycab/RRK/Finolex make in MMS casing capping/conduit of Precision make with Modular switch of Legrand-Myrius & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete, Also includes providing of 50Ltr Capacity Geyser Racold make including C curve 6-32A DP MCB with metal enclosure Legrand make, Exhaust Fan Heavy Duty Metal Body 225mm Transair-Crompton make & Philips light fixture of 15W of suitable design as per site requirement and prior approval from Engg-in-charge as follows: Light Point Primary upto 6mtr - 30, Secondary Point upto 6mtr - 50, Power Point 6A - 4, Power Point 16A - 1, Set of two 6A Power Point - 4, Light fixture 18W - 40, Geyser with DP MCB 6-32A with Metal Enclosure - 1, Exhaust Fan 225mm Metal Body Heavy Duty - 20

Corridor & Staircase Area of Single Floor : Providing ,fixing and commissioning of Conceled Lighting, Power, Bell & TV points inclusive of Back boxes, Cover Plates, Switch, Sockets, TV Socket, Telephone Socket, Bell with buzzer and indicator complete with its wiring from DB/Telephone Junction/TV Junction to point by laying 1.5/2.5/4sqmm copper conductor PVC insulated FRLS of 1100 V AC grade wire, 0.5 mm gauge unarmoured 2 pair telephone wire D.O.T approved/RG6 coaxial cable Polycab/RRK/Dlink/Finolex/Digilink make in MMS casing capping/conduit of Precision make with Modular switch of Legrand-Myrius & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete, Also includes providing of Ceiling fan of 1400mm Energy Efficient BLDC Motor Atomberg/Superfan make & Philips light fixture of 18W of suitable design as per site requirement and prior approval from Engg-in-charge as follows: Light Point Primary upto 10mtr - 20, Secondary Point upto 6mtr - 50, Power point 6A - 4, Power point 16A - 2

Supplying and instllation of conceiled telephone outlet inclusive of Telephone instrument panasonic KX TS 500 B, Telephone socket with back box and cover plate Legrand-Myrius make complete.

Supplying and instllation of conceiled TV point inclusive of TV socket with back box & cover plate Legrand-Myrius make.

Fire Alarm System Supply ,installation ,testing and commissioning of Conventional Fire alarm and Public Address System. Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc.

Supplying, installation, testing & commissioning of Manual Call Point (Pill Box)

Supplying, installation, testing & commissioning response indicator on surface/recesswith two LEDs with all connections etc.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete

Supplying & laying with saddling of 2x1.5 sqmm armoured cable, 600/1000V rated with annealed copper conductor FRLS,Colour-Red,complete .

Supplying & laying with saddling of 8 x1.5 sqmm armoured cable, 600/1000V rated with annealed copper conductor FRLS,Colour-Red,complete .

Supplying, installation, testing & commissioning of Local Control Panel 2 zone 24 Volt DC

HVAC Works SITC of Window AC-100% Copper coil condenser,3Star rating-2T,Non-Inverter, Make-Voltas

Vaishnavdevi Furnishers

KUMAWAT INFRASTRUCTURE

3in3 interior

P. K. Enterprises

MAHENDRA REALTORS AND INFRASTRUCTURE PVT LTD